Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pflugerville
Gate repair in Pflugerville, TX typically runs $150 to $500 for common hinge, post, and alignment work, while motor and actuator replacement on builder-installed systems lands between $450 and $1,100. Most repairs in the 78660 and 78691 zip codes are finished the same day we arrive, and we won’t touch your gate until the price is quoted and agreed. Call (877) 610-2993 and a live person answers, day or night.
Here’s what Pflugerville homeowners need to understand about their gates: the soil under this town moves more than most people realize, and that movement is the reason so many gates start dragging, sagging, or refusing to latch. We drive into Blackhawk, Falcon Pointe, Highland Park, and the acreage along Weiss Lane and Cele Road almost daily, and we know exactly what Blackland Prairie clay does to hinge posts, footings, and gate frames through a Central Texas summer. This is our Gate Repair team’s home turf, and the issues here are consistent enough that we can usually diagnose the problem over the phone before we even pull up.
Why Gatewood Fence & Gate Is Pflugerville’s Preferred Gate Repair Company
Hal Gatewood has been owner-operating since 2001. His name is on the shop, his address is published, and anyone can look up the license. That matters to Pflugerville homeowners because a lot of gate work in this town now involves HOA-governed communities where a half-done repair gets flagged by the management company and you end up paying twice. We show up, fix it right the first time, and then it’s done. No chasing a call center three states away.
Calls are answered by a live person, 24/7. Not a voicemail, not an automated queue. Pflugerville response times are typically same-day for repair calls inside Travis County, and we coordinate dispatch from our Austin office, with crews serving Pflugerville locally throughout the week. When you call (877) 610-2993, you’ll talk to someone who can tell you when a person will be at your gate and what it will take to get it working.
Every repair carves the 90-Day Done Right Promise in writing. If the gate fails or the fix doesn’t hold, one call brings us back. No runaround, no qualifications. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. You’ll know the price before we start, and that price is what you’ll pay.
Our Gate Repair Services in Pflugerville
Electric Gate Repair
The same-vintage wave of LiftMaster and Ghost Controls actuator failures in Pflugerville’s 2007-2012 HOA build-outs keeps our electric gate repair schedule full year-round. These entry-level openers share a 10 to 15 year actuator lifespan, and in Blackhawk and similar subdivisions that clock started around the same time for every house. Board replacement, actuator swaps, photo-eye alignment, and limit-switch troubleshooting are our bread and butter here. If the motor hums but the gate doesn’t move, or the opener won’t respond to the remote, call (877) 610-2993 and we’ll get it diagnosed.
Automatic Gate Repair
Automatic gate repair in Pflugerville often means upgrading a builder-grade opener that was sized for a narrow side-yard gate but is now being asked to run a wider driveway entry. On acreage along Cameron Road and Weiss Lane where farm gates cycle constantly for livestock and equipment, we regularly see burned-out actuators and stripped rack and pinion gears. That’s a power and span problem, not a “cheap part” problem. Our crew matches the operator to the gate’s actual weight, width, and daily cycle count, and we install it to hold up under Central Texas conditions.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Blackland Prairie clay absorbs and expels moisture with the boom-and-bust rain cycles, so concrete gate-post footings in Pflugerville heave and tilt far more aggressively than in sandier Hill Country or northern Williamson County soils. We reset posts, pour new footings, re-plumb the hinges, and weld reinforcements where the post has cracked or spalled at the base. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
If your gate swings and latches fine after spring rains but drags on the ground by August after the clay desiccates and contracts, you have a realignment problem. That seasonal shift is the single most common repair request we get from Pflugerville homeowners. We re-hang the gate, adjust the hinge spacing, and in many cases we’ll recommend a heavier post footing or a steel post replacement so the same thing doesn’t happen next summer. Realignment is not a “tighten the bolts and hope” job. It’s a geometry fix.
We also do lock repair and weld and rust repair. South-facing ornamental iron gates in Pflugerville take brutal UV and 100°F-plus heat, and powder-coat chalking is the first sign the steel underneath has started to degrade. We grind out the rust, weld in new material where needed, and refinish to match. On HOA lots, we’ll match the approved style and get sign-off before we call it done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pflugerville
We’re certified to service nine major gate brands, and around Pflugerville the ones we see most are FAAC, BFT, and Linear on the higher-end HOA estates and LiftMaster and Ghost Controls on the 2007-2012 builder installs. We stock common boards, arms, remotes, and sensors for these systems, so turnaround is fast and you’re not waiting on a backorder. When a control board fails, we can usually swap it the same day. Where a gate operator is too undersized for a wide farm gate, we’ll show you exactly what’s failing and what an appropriately-rated replacement costs before we touch anything.
Common Gate Repair Problems We See in Pflugerville Homes
- Swing gates dragging or failing to latch by late summer. The same Blackland Prairie clay that holds moisture through spring shrinks dramatically through August, tilting hinge posts and dropping the gate leaf out of alignment. This is a soil-movement problem first and a gate problem second, which is why cheap re-hang jobs only last until the next dry spell.
- Builder-installed gate operators dying in a wave. Between roughly 2007 and 2012, Blackhawk and similar Pflugerville HOA communities got entry-level LiftMaster and Ghost Controls openers with a 10-15 year actuator lifespan. Those clocks are all running out at once, so board failures and actuator swaps are clustered across the same neighborhoods.
- Powder-coat chalking and rust on south-facing ornamental iron. Central Texas UV and sustained summer heat above 100°F break down powder coat faster than most homeowners expect, especially on gates with full afternoon sun exposure. Once the finish cracks, moisture gets under it and the steel starts rusting from the top down.
- Wide farm gates overloading undersized operators. On acreage entrances off Weiss Lane, Cele Road, and out toward the county line, we see heavy tube-steel farm gates running on residential-grade openers that were never sized for the weight, wind load, or daily cycle count. The actuator burns out, or the rack and pinion strips, and the gate ends up stuck half-open.
Pricing for Gate Repair in Pflugerville, TX
Here are the numbers we quote for work across Pflugerville:
- Hinge adjustment or single hinge replacement: $150-$300
- Gate realignment with post re-plumb: $250-$450
- Post reset with new concrete footing: $400-$800
- Electric gate board replacement: $300-$600
- Actuator or arm replacement on a builder-grade opener: $450-$900
- Full operator upgrade for a wide or heavy gate: $800-$2,200
What moves a price up? The gate’s weight and width, the condition of the posts, whether the post needs resetting rather than just adjusting, and whether the operator is under-rated for the gate. We quote the full price before any work starts, and you’ll approve it in writing first. There’s no trip charge inside Travis County, and $40 comes off any repair over $200. Call (877) 610-2993 for an exact number on your gate. Estimates are free.
We Also Serve Cities Near Pflugerville
Our crews cover Pflugerville plus the surrounding communities in the northeast Austin metro. We’re often out in Pflugerville itself, and we also run service calls to Wells Branch, Hutto, Brushy Creek, and Anderson Mill when the same soil-movement and builder-operator problems show up there. Gates don’t respect city limits, and neither do we.
Serving Pflugerville, TX - Our Local Coverage Area
We’re based in the Pflugerville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Pflugerville
Your gate is moving because the Blackland Prairie clay under your hinge posts is moving. Spring rains swell the soil and things sit level. By August, the clay has dried and contracted, the post has tilted out of plumb, and the gate leaf drops. The fix is resetting the post and re-hanging the gate, not greasing hinges or forcing the latch. Call (877) 610-2993 and we’ll come look at the footing, not just the gate.
Yes. Most 2007-2012 builder-grade LiftMaster arms in Pflugerville were sized for side-yard and narrow driveway gates, not wide farm or acreage entrances. We swap in a higher-rated linear or articulating operator matched to the gate’s weight, width, and cycle count, and we’ll tell you the exact cost before we order parts. The price is set before the work starts.
If your entrance is more than about 150 feet from a mains panel, running conduit and wire often costs more than a properly sized solar kit. We install solar-powered operators on acreage gates throughout the Weiss Lane and Cele Road corridor, and we size the panel and battery bank for winter cloud cover as well as summer sun. A live person at (877) 610-2993 can walk you through whether solar makes sense for your driveway before we ever send a crew.
We match the existing style, finish, and hardware profile, complete the repair, and photograph the finished gate so you have documentation of aesthetic compliance. In Blackhawk and other Pflugerville HOA-governed communities, the original builders installed matching ornamental iron gates and openers, so the HOA expects repairs to look consistent with the original spec. We handle that part as a standard part of the job, no extra charge.
Most likely the photo-eyes are out of alignment, the limit settings have drifted, or something is tripping the safety reversal. It can also be a failing actuator that no longer moves with enough force to complete the close cycle. Don’t force the gate manually past the obstruction, and don’t bypass the safety sensors to make it shut. That’s how gates hurt people. Call (877) 610-2993 and we’ll pinpoint the cause and quote the repair before we start.
Call Gatewood Fence & Gate for Gate Repair in Pflugerville
If your gate is dragging, stuck, reversing, or completely dead, call (877) 610-2993. A live person answers. You’ll get a straight diagnosis, an upfront price, and a repair that’s backed by the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on every invoice, and the person who shows up will be someone you can look in the eye at the hardware store next week. We’re not passing through. We’re based here.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pflugerville since 2001.