Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pedley
Gate repair in Pedley usually costs between $150 and $675 depending on what’s failed, and most hinge, post, and weld work on a local horse property can be done the same day or next day. We serve Pedley from our Inland Empire office, so someone who actually knows gates is never far from your driveway. When a custom-welded steel gate stops swinging true or an opener starts fighting the wind, you want a crew that’s seen Pedley’s specific problems before. Call (877) 610-2993 and you’ll get a live person, not a recording.
Hal Gatewood has been at this since 2001. The name on the shop is his, and the phone number is real. That matters in Pedley, where a gate isn’t a convenience. It’s what keeps livestock in and the rest of the world out.
Why Gatewood Fence & Gate Is Pedley’s Preferred Gate Repair Company
We don’t run a call center. When you call (877) 610-2993, a person answers. Often it’s Hal. If you want to drive to the shop and look him in the eye before you hire us, that’s fine too. Pedley customers have been doing exactly that for years, because around here a handshake still means something.
Our crew has worked on gates along 56th Street, up past the equestrian parcels near the Santa Ana River wash, and through the older ranch-style spreads off Limonite Avenue. We know the ZIP code 92509 well. Those aren’t just map coordinates to us. They’re places where a neighbor has a heavy pipe gate with a hinge post that’s finally let go after twenty summers of 105-degree heat.
Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround, no fine print. That’s how we’ve kept our reputation solid from Pedley to Rubidoux.
Our Gate Repair Services in Pedley
Pedley’s gates are different from what you’ll find in a tract-home suburb. Most were built to hold a horse or block a driveway on a two-acre lot. They’re heavy. They’re custom. And they fail in specific ways. These are the repairs we do most often here.
Electric Gate Repair
An electric gate in Pedley that won’t open usually means the opener is fighting something: a racked frame from a Santa Ana wind event, sand-packed tracks, or a hinge that’s binding. We diagnose the whole gate, not just the motor, because replacing the operator without fixing the rack just burns out another circuit board. We work on LiftMaster, DoorKing, Viking, Elite, and Ghost Controls units every week.
Automatic Gate Repair
Automatic gates on Pedley horse properties get cycled more than most: morning feed, evening turnout, farrier visits, hay deliveries. That’s fifteen or twenty cycles a day, seven days a week, in fine grit blowing off the river wash. We see stripped gears, fried force sensors, and limit switches that don’t know where “closed” is anymore. Most of those we can repair on the spot without pulling the gate out of service.
Hinge & Post Repair
Here’s the truth about a sagging gate: the problem is in the post, not the panel. A gate sags in the hinge post, not in the middle, and that is where we start. In Pedley, many hinge posts were set decades ago in concrete that’s now cracked from heat cycling. We cut out the old post, set a new footing, and weld the hinge back on so it actually holds plumb.
Gate Realignment
Pedley’s Santa Ana winds don’t just blow dust. They physically rack a 16-foot swing gate frame out of square. A gate that dragged on the ground or wouldn’t latch after a windstorm usually doesn’t need replacement. It needs realignment and often a welded corner brace. That’s a repair, not a new gate, and it’s a lot less money.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pedley
We’re certified to service nine major gate brands, and the ones we see most on Pedley properties are Viking, Ghost Controls, and DoorKing. Whether your opener is a commercial-grade Viking on a corral gate or a Ghost Controls unit on a long driveway swing, we can diagnose it and repair it without telling you to buy a new one. We stock common parts and can usually get a Pedley customer’s gate moving the same day we look at it. The people who show up are background-checked and actually work for Hal, not a subcontractor half an hour away.
Common Gate Repair Problems We See in Pedley Homes
- Santa Ana wind racking. Wind funneling through the Jurupa Hills hits a wide steel gate like a sail, pulling hinge posts out of plumb. Once the frame racks, stock hardware won’t fix the sag. It needs welding.
- River-wash sand in slide tracks. Fine grit from the Santa Ana River wash blows into track rails and roller mechanisms. The gate starts binding, the operator strains, and eventually gears strip. Regular track cleaning is cheap; a new gearbox isn’t.
- Heat-cracked wood and paint failure. Summer temperatures over 105°F with almost no humidity crack wooden gate panels and peel paint off steel. Once the wood splits at a hinge, the latch line shifts and the gate stops closing properly.
- Custom hardware that no longer exists. Many Pedley gates were welded on-site by a previous owner using steel pipe and flat bar. When a hinge pin or latch wears out, there’s no stock replacement. You need someone who can weld one.
Pricing for Gate Repair in Pedley, CA
Here’s what gate repair actually runs in Pedley’s market, based on the work we do every month. A standard hinge or latch repair on a residential gate typically costs $150 to $350, including labor and hardware. A sagging gate that needs post reset work usually lands between $300 and $650, depending on footing depth and whether welding is required. Automatic gate opener repair runs $180 to $450 for most board, gear, or limit-switch work. Weld and rust repair on a custom pipe gate ranges from $125 to $400 based on how much steel needs patching. Every price is quoted and agreed before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact number on your gate.
We Also Serve Cities Near Pedley
Our Gate Repair team works throughout the Inland Empire, including Pedley and the surrounding communities of Glen Avon, Sunnyslope, Rubidoux, and Riverside. If you’re a few miles down Van Buren or across the river in one of those towns, the same crew and the same warranty apply. You call, a person answers, and we show up when we said we would.
Serving Pedley, CA - Our Local Coverage Area
We’re based in the Pedley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Pedley
Because most were never manufactured in a factory. Many Pedley horse-property gates were custom-welded on-site by previous owners using steel pipe and flat bar, not a gate kit. When a hinge bracket or latch plate wears out, no stock part matches what’s on the gate. We bring a mobile welder to your driveway and fabricate the replacement bracket right there, so the gate stays true to its original build. Call (877) 610-2993 and we’ll come look.
Almost always, yes. A gate sags because the hinge post has moved or the frame has racked, not because the panel itself is worn out. We reset the post, realign the frame, and add a welded brace if the wind has twisted it. That backs the sag out and keeps the opener from fighting the weight. Replacing the whole panel without fixing the post means you’ll fix it twice.
It absolutely does. Fine sand from the wash packs into the V-track and roller carriage, and each cycle grinds it deeper. The gate starts binding, the motor pulls harder, and before long you’ve stripped a gear or overloaded the operator. We see this constantly on slide gates in Pedley. Cleaning the tracks and replacing worn rollers is a lot cheaper than a new opener, and we quote that before any work starts.
First, wipe the photocell lenses on both sides of the driveway with a dry cloth. Pedley’s dust, especially during Santa Ana season, coats those lenses with a film that makes the safety system think something is in the way. If the gate still won’t close after that, the photocell may be misaligned or the wiring to it has degraded in the heat. Don’t bypass the safety edge or photocell yourself; that’s how people and animals get hurt. Call (877) 610-2993 and we’ll sort it out.
Yes, a LiftMaster opener can run a custom pipe gate, but the hinges and frame need to be true and the gate’s weight within the operator’s rating. We recently fixed a 16-foot swing gate on a Pedley equestrian property near the Santa Ana River wash where decades of grit had worn the hinge post footing loose and the LiftMaster was fighting the rack. Our crew cut out the old post, set a new footing, realigned the sag correction, and welded a custom hinge bracket to match the original hand-built pipe frame so the LiftMaster opener cycles without tripping its force sensor. That’s the difference between matching an opener to a gate and just bolting one on.
Call Gatewood Fence & Gate for Gate Repair in Pedley
If your gate is sagging, sticking, or refusing to open, don’t wait for the next Santa Ana wind event to finish it off. Call (877) 610-2993 and tell us what’s happening. We’ll quote the work before we start, stand behind it for 90 days, and send someone who actually knows Pedley gates. Hal’s name is on the shop. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pedley and the Inland Empire since 2001.