Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Peabody
A broken gate in Peabody is usually one of three things: a hinge post that’s shifted out of plumb, an operator that’s finally given up after years of road salt and freeze-thaw cycles, or a gate that took a hit from a vehicle and hasn’t hung right since. We fix all three, usually the same day we show up. Hal Gatewood has been welding, straightening, and rebuilding gates since 2001, and our crew knows the difference between a gate that needs a $40 hinge repair and one that needs a post re-set in new concrete. Call (877) 610-2993 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Peabody’s Preferred Gate Repair Company
We’re not a national outfit running a call center three states away. Hal Gatewood’s name is on the shop and on every invoice, and his address is published for anyone who wants to drive over and look him in the eye. The crew that shows up at your house in Peabody works for Hal directly. They’re background-checked, they’re in uniform, and they’ve been fixing gates long enough to know that the gate sags in the hinge post, not in the middle, and that’s where the work starts.
We answer the phone with a live person 24 hours a day, seven days a week. Not a voicemail, not a chatbot. If your gate is stuck open at 11pm on a Sunday in West Peabody, a person picks up. Every job we do carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We serve all of Peabody, both ZIP codes: 01960 and 01961. From the mill-era neighborhoods near the city center to the Cape Cods and ranches in West Peabody, we’ve been on these streets. We know which driveways have gates hung on footings poured in the 1970s, and we know what those footings do after thirty New England winters.
Our Gate Repair Services in Peabody
Hinge & Post Repair
Most gate problems in Peabody start at the post, not the panel. Older concrete footings, particularly in West Peabody and the neighborhoods built before 1950 near downtown, heave with the frost. The post leans, the hinge binds, the latch stops lining up. We don’t just shim the hinge and call it good. We check the post itself, re-set it in fresh concrete when it’s needed, and weld the hinge bracket back square. Fix the panel without the post and you’ll fix it twice.
Weld & Rust Repair
Road salt from Route 1 and the coastal air off Salem Harbor eat ferrous hardware faster than people expect. We see rust at weld points and hinge brackets on iron gates all over Peabody, and it’s worse on gates near the commercial corridors where plow trucks and salt spreaders run all winter. We weld on site, in your driveway, not back at a shop somewhere. That means your gate stays put, we grind out the rust, reinforce the weak point, and repaint so the repair matches. If the rust is too far gone, we’ll tell you that plainly and quote a replacement panel instead of burning your money on a patch that won’t last.
Gate Realignment
A gate that drags on the ground, won’t latch, or closes crooked is usually a post that’s moved or hinges that have wallered out. In Peabody, frost heave from November through March is the leading cause. We re-set posts, replace hinge pins, and re-align the gate so it swings true. This is bread-and-butter work for us, and it’s usually a one-trip fix, no matter whether you’re off Lynnfield Street, Lowell Street, or tucked into a side street near the Northshore Mall.
Electric Gate Repair & Automatic Gate Repair
Older operators from the 1990s and early 2000s are still running all over Peabody, and they fail in predictable ways: dead control boards, worn limit switches, and safety loops that no longer read a car. We service nine major brands including FAAC, BFT, Linear, and Viking, and we keep common parts stocked so we’re not waiting a week on a shipment. When a control board is obsolete and the manufacturer has stopped supporting it, we’ll tell you that too, and walk you through whether a retrofit with modern safety sensors makes sense or whether a new operator is the cheaper answer over the next five years. The price is quoted and agreed before any work starts, so you know the number before we touch your gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Peabody
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers most of what’s installed across Peabody, from residential swing gates in the neighborhoods west of Route 128 to the commercial operators along Route 1. Because we stock common Linear and Viking parts locally, we can often complete an operator repair the same trip instead of scheduling a return visit. If your gate’s brain is a brand we know by heart, the repair goes faster and costs less. And if it’s a no-name operator from a company that went out of business ten years ago, we’ll tell you that, too, and recommend the right replacement without trying to upsell you into a system you don’t need.
Common Gate Repair Problems We See in Peabody Homes
- Frost-heaved posts in West Peabody and older mill-era neighborhoods. Repeated freeze-thaw cycles from November through March push concrete footings out of the ground, which throws posts out of plumb and stresses hinges. The gate starts scraping or won’t latch, and the fix starts at the footing, not the panel.
- Road-salt and coastal corrosion on iron gates. Peabody’s proximity to Salem Harbor means more oxidation than inland towns like Middleton or Topsfield see. Weld points and hinge brackets are the first places to go, and once rust compromises a hinge bracket, the gate’s whole weight starts working against the post.
- Vehicle impact damage along the Route 1 corridor. Auto dealerships, self-storage facilities, and warehouses on Route 1 have automated gates and entry arms that take hits from delivery trucks and customers. A clipped swing arm can bend the hinge post, throw the operator out of alignment, and knock safety sensors out of line all at once.
- Obsolete operators on residential gates. We get calls from homeowners in Peabody with gate openers installed in the 1990s that have finally failed. The control board is no longer made, the safety loops don’t meet current standards, and the question is whether to retrofit or replace. We give an honest answer with a written price either way.
Pricing for Gate Repair in Peabody, MA
A typical hinge and post repair on a residential gate in Peabody runs $180 to $420, depending on whether the post needs re-setting in concrete or just straightening and re-welding. Gate realignment work, including hinge pin replacement and latch adjustment, usually lands between $150 and $350. Weld and rust repair on an iron gate runs $200 to $500 for typical corrosion at hinge brackets and weld points. Operator replacement on an automatic gate starts around $600 and can run $1,500 or more for heavier commercial units along Route 1, which is why we always quote the repair option first when it makes sense. You’ll get a written price before any work starts, not a phone estimate that changes at your door. Estimates are free, and there’s no trip charge inside the county. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Peabody
We cover Peabody and the surrounding North Shore communities, including Gate Repair in Peabody plus Danvers, Salem, Beverly, and Beverly Cove. If your gate is down and you’re not sure whether you’re in our service area, call and ask. A live person will tell you, straight up, no call center maze.
Serving Peabody, MA - Our Local Coverage Area
We’re based in the Peabody area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Peabody
Peabody’s northeastern Massachusetts location means repeated freeze-thaw cycles from November through March, and that’s what heaves gate-post footings. Water gets into the soil around the concrete, freezes, expands, and pushes the footing up. Older footings, particularly in the mill-era neighborhoods near the city center and the 1950s-70s homes in West Peabody, are shallow by modern standards and move more. The fix is re-setting the post in a deeper footing with proper drainage, not just shimming the gate and hoping for spring. If your gate scrapes or won’t latch every winter, call (877) 610-2993 and we’ll check the post itself.
Sometimes. If the operator is a brand we still service, like Linear, BFT, FAAC, or Viking, we can often retrofit modern safety photocells and edge sensors onto the existing unit. The limiting factor is the control board. If it’s no longer manufactured and the inputs won’t accept current sensor wiring, you’re looking at a new board or a new operator. We’ll open the box, check the board, and give you a written price for both the retrofit and the replacement option. You decide which makes sense, no pressure. Call us at (877) 610-2993 for a free assessment.
Count the cycles your gate runs on a busy day. A self-storage facility or dealership on Route 1 might cycle a gate 300, 400, 500 times in a single day, and that’s beyond what a residential operator is built to handle. If you’re replacing operators every couple of years, seeing burned-out motors, or hearing the unit strain when it opens, you’re under-spec’d for the cycle rate. We’ll run the numbers with you, look at the traffic volume, and recommend an operator rated for high-cycle commercial use. The right unit costs more up front and saves money inside two years. Call (877) 610-2993 and we’ll come look.
Clean photocells don’t matter if they’re misaligned or the wiring to the control board is failing. We see this on Peabody gates all the time, especially after a frost heave shifts the gate frame just enough to throw the sensor beams out of line. The gate thinks the path is clear, so it closes. Another cause is a failing safety loop under the driveway, which is common on older installations where the loop wire has cracked over years of freeze-thaw. We test the sensors, check the loop with a signal tester, and repair the actual fault instead of just cleaning the lenses and hoping. If your gate closes on vehicles, call (877) 610-2993 before someone’s car takes a hit.
Rust at weld points and hinge brackets is usually repairable, and we do it on site, in your driveway, without hauling the gate anywhere. We grind out the corrosion, weld in reinforcing plate, and repaint to match. Replacement makes sense when the rust has compromised the structural integrity of the gate itself, meaning the rails are thin or the panel has started to bow under its own weight. On Peabody’s older mill-era homes with original iron gates, we lean toward repair because those gates are often custom-sized and reproducing them costs more than people expect. We’ll show you the rust, explain what’s salvageable, and quote both paths. The estimate is free, and the price is agreed before work starts.
Call for Gate Repair in Peabody Today
If your gate is sagging, stuck, rusted, or won’t open, call (877) 610-2993. A live person answers, day or night. We’ll give you a straight answer on the phone and a written price before any work starts. Hal Gatewood’s name is on the shop, the shop is down the road, and the 90-Day Done Right Promise is stamped on every invoice. That’s how we’ve been doing it since 2001, and that’s how we’ll do it for you in Peabody.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Peabody and the North Shore since 2001.