Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pacific
Gate repair in Pacific usually comes down to one thing: posts that won’t stay put in the valley’s saturated ground. Most jobs in the 98047 zip code run between $180 and $390 for hinge and post repair, and most calls are answered same-day. That’s the kind of work we’ve been doing here for a long time, and we know the difference between a gate that needs a quick fix and a post that needs to come out and be reset before it fails again. If you need someone out to Pacific today, call (877) 610-2993 and a live person answers.
Why Gatewood Fence & Gate Is Pacific’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and the name hasn’t changed since. When you call us for Gate Repair, you get a real person on the line, day or night. Not a phone tree. Not a dispatcher reading from a script. The person who answers can actually talk through what your gate is doing, and often what it means.
Reviews from Pacific homeowners tend to mention the same things: the person who showed up was the person who quoted the job, the work was done in the driveway, and when something wasn’t right a month later, one call brought us back without an argument. That’s the 90-Day Done Right Promise, and it’s written on the invoice, not hidden in the fine print.
Being local matters in a town like this. Pacific sits in the Green River Valley, and the soil here acts differently than it does a mile uphill in Auburn. We see leaning hinge posts, gates that won’t latch after a hard rain, and automation that took on water during the last high-water event. You learn those patterns only by driving the streets again and again.
Our Gate Repair Services in Pacific
Electric Gate Repair
Pacific’s valley floor floods, and that water gets into control boards and motors in ways it never does on higher ground. We tear down, test, and replace what’s actually failed rather than selling you a whole new operator because that’s easier for us. We service LiftMaster, Viking, and BFT units, among others, and we keep common boards and limit switches in the truck for Pacific calls.
Automatic Gate Repair
An automatic gate that worked before the last flood and won’t respond now usually points to water intrusion or debris that got into the track or gear rack. We start with the basics: power at the panel, a battery that holds a charge, limit switches that aren’t packed with silt. Hal’s crew fixes the gate where it sits instead of hauling it back to the shop.
Hinge & Post Repair
This is the bread and butter of gate work in Pacific. A gate sags because the post leans, not because the panel suddenly got heavier. In the Green River Valley’s saturated clay and silt, posts heave and shift faster than almost anywhere else in King County. When we reset a post in Pacific, we account for that: deeper footing, better drainage, and sometimes a concrete collar so the next flood doesn’t wash it loose again.
Gate Realignment
A gate that drags on the ground, won’t latch, or rubs against the post has come out of plumb. Sometimes it’s the hinges. More often in Pacific it’s the post underneath them. We measure the gap, check the post with a level, and tell you straight which one failed. Fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pacific
We work on most major gate openers and automation brands, and we’re certified to service nine of them. In Pacific, we see a lot of Viking and Linear swing gate operators on the older ranch-style homes built between the 1950s and 1980s, plus newer BFT and FAAC units on more recent installs. We carry common parts for those brands, so a repair doesn’t turn into a two-week wait on a freight delivery. Most parts are in the truck or at our shop, and we can usually get your equipment running the same visit.
Common Gate Repair Problems We See in Pacific Homes
- Leaning hinge posts from saturated soil. The Green River Valley holds water, and older posts set in shallow concrete lean before the gate itself shows any wear. We reset the post and usually add a sag correction kit so the fix holds through the next wet season.
- Flood debris seizing rolling and slide gates. After high water, we find silt packed into ground tracks and debris bent against rack and pinion hardware. Cleaning isn’t enough. The track usually needs to be re-bedded and sometimes re-welded.
- Warped wooden swing gates after flood impact. Wood gates take a beating when debris rides the current. Once they warp off their stops, the latch dies and the panel fights the hinges on every swing. We re-hang or rebuild depending on how far gone the wood is.
- Water-damaged gate operators on valley-floor properties. Controller boards and motors don’t like repeated soakings. After flooding in Pacific, we open the housing, dry out what’s salvageable, and replace what isn’t. We also re-seal the housing so the next high-water event does less damage.
Pricing for Gate Repair in Pacific, WA
Here’s what gate repair actually costs in Pacific’s market. Hinge and post repair runs $180 to $390 depending on whether the post comes out or just needs reinforcement. Gate realignment is usually $150 to $280. Electric gate repair starts around $160 for a diagnostic call and runs up to $450 or more if a control board or motor needs replacing, depending on brand. Weld and rust repair on steel gates runs $95 to $250.
You’ll know the price before we start. That’s not a courtesy, it’s how we work. We honor the quote on the invoice, and if you’re over 65 or a veteran, take 10% off any repair automatically. Any repair over $200 gets $40 off. And there’s no trip charge inside King County. Call (877) 610-2993 for a free estimate, and you’ll talk to a person who can price it over the phone.
We Also Serve Cities Near Pacific
Our service area reaches beyond Pacific to Gate Repair in Pacific and the surrounding communities. We also cover Lakeland South, Lakeland North, Lea Hill, and Auburn, with same response times and the same 90-Day Done Right Promise on every job.
Serving Pacific, WA - Our Local Coverage Area
We’re based in the Pacific area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Pacific
Most automatic gate openers have a manual release handle or key on the motor housing, usually a small lever that disengages the drive gear. Pull it and the gate swings free by hand. Don’t force it if it’s jammed against debris or silt, and don’t try to power-wire around a damaged board. If the gate took on water and the release won’t move, call us at (877) 610-2993 and we’ll walk through it on the phone or send someone out.
Because Pacific sits in the low-lying Green River Valley, and the ground here stays wet. Saturated soil doesn’t hold a concrete footing the way drier upland soil does. Heaving shifts posts, and every shift loosens the footing a little more until the post leans and the gate sags. Homes on higher ground in Auburn don’t fight that the same way.
Usually it can be repaired. A warped wooden panel can often be re-hung with a sag correction kit, and a steel gate that took flood debris can be re-welded and re-painted. We’ll always tell you if the panel is too far gone, but our instinct is repair first. Show me the gate closing on its own and I’ll show you where it’s failing.
Yes, mostly. The valley’s water saturation means the post the gate hangs from will shift every time the ground swells. The gate wasn’t built wrong, the ground it sits in moved under it. We fix it by resetting the post and adding a tension rod or wheel where it makes sense, so it doesn’t happen again in eight months.
Water intrusion is the most common cause we see in Pacific. Flood water gets past the housing seal and shorts the control board, or silt packs into the limit switch and the opener can’t tell where the gate is. Those parts can be replaced without swapping the whole system. Call (877) 610-2993 for an exact diagnosis, and the estimate is free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pacific since 2001.