Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Oakmont
Gate repair in Oakmont usually comes down to one of two things: a hinge that’s pulled out of an old stone pillar, or an operator that gave up after years of freeze-thaw cycles along the Allegheny River. Most jobs we handle are done in a single visit, and the price is agreed before we touch a tool. If your gate is sagging, scraping, or just won’t open, call us at (877) 610-2993 and you’ll talk to a real person who knows Oakmont’s gates, not a phone tree.
We’ve worked on enough pre-war ironwork along Allegheny River Boulevard, Hulton Road, and the streets off Pennsylvania Avenue to know that a gate here is rarely a simple swap. The posts are old. The pillars are stone. The hinges were set by hand a century ago. That’s the work we actually like.
Why Gatewood Fence & Gate Is Oakmont’s Preferred Gate Repair Company
Hal Gatewood opened Gatewood Fence & Gate in 2001 and has kept the name on the shop ever since. The person who answers the phone around the clock is the same person who stands behind every job with the 90-Day Done Right Promise in writing. Not a call center. Not a subcontractor you’ll never see again. When we say we’ll be there, we mean it, and you can drive to the shop and look Hal in the eye if you ever have a question.
Oakmont homeowners keep calling us because we repair before we replace. A gate that’s dragging on the latch side usually doesn’t need a new leaf. It needs a hinge re-anchored into solid masonry or a post pulled back to plumb. That’s the kind of fix we’ve done hundreds of times in Oakmont’s older neighborhoods, and it’s why our customers here tend to call us first when the next gate goes out of whack.
We’re licensed and insured, our crew is background-checked, and we show up in uniform. When Oakmont calls, we know the drive, we know the streets, and we know the difference between a 1920s carriage gate on a stone pillar and a 1990s aluminum panel on a steel post. That local knowledge shows up in the quality of the work.
Our Gate Repair Services in Oakmont
Here’s what we handle most often in Oakmont, and how we approach each one. If your problem isn’t listed, call anyway. We’ll tell you over the phone whether it’s something we can fix, and we’ll mean it.
Hinge & Post Repair
In Oakmont, the hinge is usually the problem, not the gate leaf. Old iron gates on Pennsylvania Avenue, Maple Avenue, and the streets near Oakmont Country Club were often set with pintles driven directly into brick or stone pillars. A century of freeze-thaw cycles cracks the mortar around those pintles, and the gate starts to sag. We remove the old post footing where needed, recore the pillar, set new anchors in epoxy, and remount the gate so it swings true without stressing the stone again. We keep period-correct strap hinges and pintles on hand for exactly this work.
Gate Realignment
The Allegheny River valley heaves. Every winter, water gets into post holes and freezes, lifting stone and brick posts a fraction of an inch at a time. After a few seasons, a swing gate that once cleared the drive by six inches is dragging by two. We pull posts back to plumb, shim and set them properly, and then adjust the leaf so it closes square. This is often a same-day fix, and it’s one of the most common calls we get from Oakmont homes built before 1940.
Weld & Rust Repair
Low-lying streets in Oakmont see river flooding more often than people think, and that saturates the ground around post footings. Wrought iron gates rust from the bottom up. We weld on site, so the gate never leaves your driveway. We cut out rusted sections, weld in new steel, grind it smooth, and refinish to match. For ornamental ironwork from the early 1900s, we’re careful to preserve the original scrollwork and details while making the gate strong again.
Electric Gate Repair
Electric gate repair in Oakmont covers operators, keypads, safety loops, and the wiring that runs under long driveways. We service nine major brands including FAAC, BFT, and Linear, and we stock common boards, arms, and remotes for Oakmont customers. If your gate opens partway and reverses, or the keypad stopped reading your code, we’ll diagnose it on site and give you a price before we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Oakmont
We’re certified to work on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A lot of Oakmont’s automatic gates run FAAC or BFT operators, especially on the longer driveways where hydraulic arms handle the weight better. We keep parts for those brands stocked locally, which means we can usually complete a repair in one trip instead of waiting on a shipment. If your operator is older or discontinued, we’ll tell you straight whether it’s worth repairing or whether a new board makes more sense. The decision is always yours, and the price is always upfront.
Common Gate Repair Problems We See in Oakmont Homes
- Hinge pintles pulling out of stone or brick pillars. This is the classic Oakmont failure. Original 1900-1930 hinges were set into mortar that’s now cracked and powdery. The gate sags, but the leaf itself is fine. We re-anchor the pintle into the pillar, not the loose mortar.
- Freeze-thaw post heave on river-valley lots. Oakmont’s position in the Allegheny River valley means winter ground movement. Posts drift out of plumb every year, and gates bind or refuse to latch. We reset the post and adjust the gate, and we set the footing so it stays put longer.
- Rust at the base of ornamental iron gates. Flooding on low-lying streets near the river saturates the ground, and that moisture wicks up into the iron. We cut out the rust, weld in new material on site, and treat the repair so it doesn’t come back next season.
- Operators failing from years of service on heavy gates. A lot of Oakmont gates are heavy iron, and a residential opener can’t handle them forever. We’ll tell you if the operator is undersized for the gate, and we’ll fix the safety sensors and loops so the gate stops what it’s doing if something is in the way.
Pricing for Gate Repair in Oakmont, PA
Here’s what gate repair typically costs in Oakmont. You’ll always get a firm price before we start, and we honor it. No trip charge inside the county.
- Hinge re-anchoring into a stone or brick pillar: $220-$420
- Post reset and realignment (per post): $280-$550
- On-site weld and rust repair (small section): $180-$380
- Electric gate operator diagnosis and minor repair: $160-$400
- Full operator replacement: $680-$1,850, depending on brand and gate weight
- Safety loop or sensor replacement: $140-$320
These are honest ranges for Oakmont’s market. An original wrought-iron gate on a century-old stone pillar costs more than a 1990s aluminum panel because the masonry work is slower and the hardware has to match. We’ll walk you through the price line by line before any work begins. And remember: $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Oakmont
Gatewood Fence & Gate handles Gate Repair for homeowners all over the Allegheny valley. In addition to Oakmont, our crew regularly works in Penn Hills, Fox Chapel, Lower Burrell, and Plum. If you’re in any of those boroughs and your gate is dragging, sagging, or dead, call the same number and we’ll head your way.
Serving Oakmont, PA - Our Local Coverage Area
We’re based in the Oakmont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Oakmont
No, it’s almost never the gate leaf. In Oakmont, the sag comes from the hinge pintles pulling out of cracked stone or brick pillars, or from the post itself heaving out of plumb during freeze-thaw cycles. The gate leaf is usually fine. We fix the anchor point, not the leaf, and the sag goes away. Call (877) 610-2993 for an exact quote on your specific gate.
Yes. We can mount a modern operator behind the leaf or on the inside of the pillar so it’s nearly invisible from the street, and we’ll keep the original hinges, pintles, and any period hardware intact. The operator arm gets powder-coated to match, and we run the conduit low so it doesn’t interrupt the sightline. This is common in Oakmont, where the gate itself is part of the house’s character. Call us at (877) 610-2993 to talk through the options.
We remove the old pintle, drill out the compromised mortar, and set a new anchor in epoxy rated for stone. Then we patch the pillar face so it looks like it was never touched. If the pillar itself is crumbling, we may need to rebuild a section with matching material. The gate stays in your driveway the whole time, and the repair holds up to Oakmont’s winters. Estimates are free.
Yes, solar openers work well on Oakmont’s long drives, especially on the south-facing slopes where the panel gets full sun. For heavy iron gates, we size the battery bank and panel to handle the extra weight, and we can add a trickle charger for the cloudy stretches in late fall and winter. We’ll design the system for your specific gate, not a one-size-fits-all kit. Call us at (877) 610-2993 for a free estimate on a solar set up that matches your gate.
Yes, we fix safety loops, sensors, and reversal systems on every brand we service, including FAAC, BFT, and Linear. A gate that reverses partway is usually tripping a sensor or loop that’s misaligned, shorted, or failing. We test the whole safety circuit, replace the bad component, and then run the gate through its full cycle so you know it’s stopping where it should. Call us at (877) 610-2993 for an exact price, and we’ll have your gate operating safely again.
Call Hal Directly - Oakmont Gate Repair, Same Day
If your gate is stuck open, stuck closed, or wobbling on a cracked pillar, call (877) 610-2993 now. You’ll reach a live person who can talk through what’s wrong and tell you whether we need to come out. We serve all of Oakmont, including 15139, and the first look is free. No dispatch queue, no voicemail, no call center. Just a local crew that shows up, fixes the gate, and stands behind it with the 90-Day Done Right Promise.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Oakmont since 2001.