Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Oakland Park
Gate repair in Oakland Park runs $125-$850 depending on whether we’re replacing a hinge post, straightening a bent frame, or swapping out a corroded control board on an automatic operator. We’re usually at your curb within 24-48 hours for a repair. If a gate won’t open and your car is stuck in the driveway, call us at (877) 610-2993 and we’ll get there the same day. Our Gate Repair crew knows Oakland Park’s canals, old CBS homes, and tight shared driveways, so we don’t waste your time trying to figure out what kind of gate you have. Hal Gatewood has been fixing gates since 2001, and he still shows up on the job himself.
Why Gatewood Fence & Gate Is Oakland Park’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop and on every invoice. That matters to Oakland Park homeowners because most of the gate companies that show up here are either national crews that contract jobs out to strangers or fly-by-night welders with a truck and no address. We’re neither. Hal has been owner-operating since 2001, and when you call (877) 610-2993 a live person answers, day or night, not a call center three states away. If you want to look someone in the eye, our address is published and you can drive to the shop. The name is on the shop, and the shop is down the road, that is the oldest accountability there is.
Oakland Park customers keep us busy because we fix what other companies want to replace. A sagging hinge post does not mean you need a whole new gate. A corroded control board does not mean you need a whole new operator. We weld on site, in your driveway, so the gate never leaves your property. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right, one call brings Hal back, no runaround.
Our Gate Repair Services in Oakland Park
Electric Gate Repair
Electric gate repair in Oakland Park usually means diagnosing a dead control board, a failed capacitor, a burned contactor, or a shorted limit switch. Near the canal fingers off NE 16th Ave and the Middle River corridor, we see a lot of operator boards that look fine on the outside but are corroded green on the inside. We carry sealed NEMA-4X rated replacement boards for LiftMaster, FAAC, BFT, Linear, and Viking operators, so when we leave, the repair holds up to the humidity. If your gate just stopped responding and you can smell something like burnt plastic inside the operator box, call us before you pull the cover off. Capacitors hold a charge even after the breaker is off.
Automatic Gate Repair
Automatic gate repair in Oakland Park covers everything from a remote that won’t pair to a loop detector that won’t sense a car on a shared driveway. The typical automatic gate issue here falls into three buckets: a control board failed from humidity, a motor burned out from running against a wind-bent frame, or a sensor misaligned so the gate won’t stay open. We service opener systems from FAAC, BFT, Linear, and Viking, and we stock the boards, belts, and sensors our Oakland Park customers actually need rather than making you wait two weeks for a part. The price is quoted and agreed before any work starts, so the number we hand you is the number you pay.
Hinge & Post Repair
Oakland Park’s original 1950s and 1960s ornamental iron gates almost always fail at the hinge post first. Concrete footings poured sixty years ago were never meant to hold a modern automated operator, and the added torque of an opener shears bolts and pulls posts out of plumb. Hal sets a new hinge post into a deeper footing, re-welds the hinge barrels, and realigns the gate so it swings true. This is the job we see mentioned in Oakland Park homeowner groups more than any other: “my gate scrapes the concrete and won’t close all the way.” That scrape usually means the post moved, not the gate bent.
Gate Realignment
A gate that drags, binds, or won’t latch is a realignment job, not a mystery. We level the gate, re-set hinges, adjust the opener travel, and fine-tune the limit switches so the gate stops exactly where it should. On Oakland Park’s narrow shared driveways, where a swing gate swinging too wide clips a neighbor’s car, realignment isn’t just a convenience. It keeps neighbors civil. We service slide gates, swing gates, cantilever gates, and pedestrian gates, and we have the welding rig on the truck to make most realignment repairs in one visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Oakland Park
If your gate opener was installed in the last thirty years, chances are we service the brand. Our crew is certified on FAAC, BFT, Linear, and Viking among others, and we stock boards, receivers, belts, and hinge hardware for those brands locally so Oakland Park repairs happen fast instead of waiting on a warehouse. A lot of companies will only touch the brand they sold you. We’ll fix whatever is on your gate and tell you straight if the part is worth saving or worth replacing.
Common Gate Repair Problems We See in Oakland Park Homes
- Corroded control boards near canals. Salt-humid air infiltrates unsealed enclosures and eats circuit boards within 3-5 years. If you’re within two blocks of a canal, insist on a marine-grade sealed operator, or expect to replace the board before the motor ever wears out.
- Sagging gates on original hinge posts. Forty-to-sixty-year-old posts set in shallow footings can’t hold a modern operator. The gate sags, the motor strains, and the opener burns out. We set a new post in a deeper footing and refit the gate.
- Storm-bent frames and sheared hinge bolts. June through November wind gusts bend gate frames and snap bolts on narrow walkways. If your gate suddenly binds after a storm, it’s usually the frame, not the opener.
- Failed loop detectors on shared driveways. A loop detector buried under old concrete can crack and stop sensing vehicles. On Oakland Park’s tight rights of way, that means the gate won’t open for you or your neighbor. We diagnose it and replace or reconfigure the loop.
Pricing for Gate Repair in Oakland Park, FL
You can expect honest Oak Park gate repair prices. A hinge post replacement runs $350-$700 depending on how deep we have to dig and whether the existing concrete is sound. Gate realignment typically runs $150-$300. Electric gate repair starts around $125 for diagnostics and simple limit-switch adjustments. Full control board replacement on a canal-side operator runs $300-$600 depending on the brand and board. Automatic operator motor replacement runs $450-$850. We write every quote down before work starts, and the price we agree is the price on the invoice. No trip charge inside Broward County, and we take $40 off any repair over $200.
We Also Serve Cities Near Oakland Park
If you live just outside Oakland Park, in North Andrews Gardens, Wilton Manors, Lauderdale-by-the-Sea, or Sunrise, we still cover the call. Those areas have the same coastal humidity, the same aging housing stock, and the same gate problems, but each one has its own quirks. See our Oakland Park service area for what we handle locally, or call and tell us what yours is doing.
Serving Oakland Park, FL - Our Local Coverage Area
We’re based in the Oakland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Oakland Park
If your gate is within two blocks of a canal finger, the Middle River, or any standing water in Oakland Park, you should insist on a sealed NEMA-4X rated operator. The salt-humid air here corrodes control boards in as little as 3-5 years, and the failure is usually invisible until the gate stops working. At that distance, it’s not a caution, it’s the right spec. For a quote on a sealed operator, call (877) 610-2993. Estimates are free.
Most of the time, yes. We excavate around the existing post, pull it, set a new post in a deeper footing with new concrete, and re-weld the hinges. Your driveway usually doesn’t get torn out unless the original post was set into a monolithic slab. We’ll tell you what we see before any work starts. Call (877) 610-2993 and we’ll look at your gate in person.
The most common cause in Oakland Park is wind torque bending the frame enough to bind the hinges, which makes the motor pull harder than it was designed to. A close second is a control board that was already corroding from canal humidity and finally let go when a power surge hit during the storm. We diagnose the binding first, then check the board, and we quote you before we replace anything. If you’re near a canal, ask about a sealed NEMA-4X board so you’re not doing this again in three years.
You usually can. Slide gates don’t swing into the driveway, they run on a track or a cantilever system along the fence line. On Oakland Park’s tight shared rights of way, we often convert a failing swing gate to a slide gate with a modest concrete runner or a cantilever frame that needs no track at all. We measure, quote, and do the whole job on site. Call (877) 610-2993 for a free measure and a written price.
Yes. Under Florida building code and UL 325, any automated gate operator installed on a residential shared driveway or common access in Oakland Park must have an approved entrapment protection system, like photo-eye sensors or a reversing edge. If your gate doesn’t have those and it’s on a shared driveway, it’s not code-compliant and it’s a liability. We check entrapment protection on every automatic gate repair we do, and we’ll quote the fix if yours is missing. Call (877) 610-2993 for an inspection and a free estimate.
Call Gatewood Fence & Gate for Gate Repair in Oakland Park
When your gate won’t open, you don’t need a phone tree. You need a live person who knows Oakland Park, knows gates, and gives you a straight price before any work starts. Call (877) 610-2993 and Hal or someone from his crew picks up. We’ll set a window, show up in it, and fix your gate in your driveway, not haul it off to a shop. Free estimates, upfront pricing, and the 90-Day Done Right Promise on every job here in Oakland Park. If you’re an Oakland Park senior or veteran, ask about your permanent 10% discount.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Oakland Park and Broward County since 2001.