Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair in North Miami, FL: What It Costs and Who Actually Shows Up
You’ve got a gate that won’t open or a sagging panel dragging across the driveway, and you need a real answer. Gate repair in North Miami typically runs $85 to $185 for hinge and alignment work, $220 to $450 for electric motor and control board replacement, and $350 to $900 when a post needs to be reset and welded on site. Hal Gatewood has been fixing gates since 2001, and he answers the phone himself. Call (877) 610-2993 and you’ll get a person, not a recording.
We work all over the 33161 ZIP, from the ranch homes off West Dixie Highway to the older apartment complexes along NE 6th Avenue. A lot of what we see in North Miami is the same story: salt air off Biscayne Bay eating through hinges and control boards years before anyone inland would ever have a problem. That’s why we stock replacement parts for North Miami jobs in our trucks rather than ordering everything in and making you wait two weeks.
Fast, Reliable Gate Repair Across North Miami
When your gate stops working in North Miami, you want someone who knows the difference between a dead capacitor and a bad safety loop, and who can get to your house before the dog figures out the gate is open. We respond to service calls throughout North Miami the same day you call in most cases, because our scheduling runs through the Miami office just a short drive south and our crews are already working the 33161 corridor every week.
There’s no national outfit here. No call center three states away. When you call (877) 610-2993, a live person picks up, 24 hours a day. And when someone shows up at your gate on NE 135th Street or Arch Creek Road, it’s a background-checked, uniformed technician who works for Hal Gatewood directly. The name on the invoice is the same name on the shop.
We’ve been doing Gate Repair in South Florida long enough to know that a gate that fails once will fail again unless you fix what actually caused the problem. In North Miami, that usually means corrosion, a hinge post that’s rotted from the inside, or an operator board that got fried by a summer lightning storm.
Why Gatewood Fence & Gate Is North Miami’s Preferred Gate Repair Company
Hal Gatewood has been at this since 2001, and he still owns the company himself. That’s not a marketing line. His address is published, his license number is public record, and he lives close enough to North Miami that he’s the one who comes out when a job gets complicated. Most of our work in the 33161 ZIP comes from referrals: somebody on Keystone Boulevard got their gate fixed, told their neighbor on Sans Souci Boulevard, and now we’re servicing half the block.
Our North Miami customers keep calling back because we do something a lot of repair companies won’t: we fix the gate in your driveway instead of hauling it off to a shop. On-site welding means a sagging ornamental gate from a 1960s ranch home gets repaired where it stands, not replaced with a generic panel that doesn’t match the house. And every job, from a $100 hinge replacement to a full operator swap, gets the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
The other thing people mention is the pricing. You’ll hear the total before any work starts, and that’s the number you pay. We don’t quote one price on the phone and a different one at the door, because Hal would rather tell you the truth and let you decide.
Our Gate Repair Services in North Miami
Electric Gate Repair
Electric gate repair in North Miami usually comes down to one of three things: a control board that got zapped by lightning, a gate motor or opener that’s been grinding through salt corrosion for years, or a safety sensor that’s out of alignment. We service Linear and Viking operators every week in the 33161 ZIP, and we keep the common boards and capacitors in stock so we’re not ordering parts and leaving your gate open for a week. A typical electric gate repair here runs $220 to $450 depending on whether it’s a board, a motor, or both.

Automatic Gate Repair
Automatic gate systems along North Miami’s busier corridors, especially at condo and apartment properties on NE 125th Street and along West Dixie Highway, tend to be older sliding systems that were installed before current wind-code enforcement. We repair DoorKing and Ghost Controls automation, replace failing gate access control loop detectors, and realign tracks that have shifted from years of heat and settling. If your gate opens but won’t close, or closes but won’t lock, that’s the kind of call we run several times a month in North Miami.

Hinge & Post Repair
This is the one that saves North Miami homeowners the most money. A gate sags in the hinge post, not in the middle, and if you fix the panel without the post, you’ll fix it twice. We see this constantly on the original wrought-iron gates from the 1950s through 1970s ranch homes throughout 33161. The post rots from decades of 70%-plus humidity, the gate leans, and the hinges start tearing out. We reset the post, weld the hinge mounts with on-site welding, and the gate swings clean again. Typical hinge and post repair in North Miami runs $220 to $600 depending on whether we’re resetting one post or two.

Gate Realignment
When a gate starts scraping the driveway or won’t latch anymore, realignment is usually the first fix to consider before replacing anything. Heat expansion, shifting concrete, and corroded hinge surfaces all move gates out of true in North Miami. We’ll cut and re-weld hinge barrels, shim the post, or adjust the operator limits so the gate stops where it should. Most realignment jobs are $85 to $185 and take under an hour on site.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Miami
We carry parts and service Linear, DoorKing, Viking, and Ghost Controls operators, which covers the majority of automatic gate systems installed in North Miami. If you’re not sure what brand you have, Hal’s crew will know the moment they open the cover. Because we stock local parts for the 33161 corridor and the surrounding areas, a repair that another company would schedule out a week for can often be handled the same day the part gets pulled off the truck.
Common Gate Repair Problems We See in North Miami Homes
- Salt corrosion on hinges and operator boards: Salt-laden air off Biscayne Bay works its way into every exposed surface, and we routinely see gate hardware fail within 4 to 6 years in North Miami that would last a decade or more in Kendall or Hialeah. If your gate looks like it’s been sandblasted with rust, that’s the bay doing its work.
- Lightning-damaged control boards and loop detectors: Summer afternoon thunderstorms roll through North Miami most days from June through September, and a direct lightning strike nearby is all it takes to fry a Viking or DoorKing control board. If your gate died right after a storm, don’t bother resetting the breaker a fifth time, call us.
- Hinge post rot from decades of humidity: Those original ornamental gates on 1950s and 1960s ranch homes throughout 33161 were beautiful, but nobody used galvanized posts back then. After 50 or 60 years of 70%-plus humidity, the steel inside the concrete is gone, and the gate starts leaning hard.
- Misaligned slide gates on older apartment complexes: Sliding automatic gate systems on aging condo properties along the NE 6th Avenue corridor are often undersized for current wind-rating compliance, and years of ground settling have knocked the tracks out of line. The gate jams halfway open, and the property manager gets a call every other week.
Pricing for Gate Repair in North Miami, FL
Here’s what you can expect to pay for gate repair in North Miami based on the work we do most often:
| Service | Typical Range |
|---|---|
| Hinge replacement or realignment | $85 - $185 |
| Electric motor or control board replacement | $220 - $450 |
| Hinge post reset and weld | $220 - $600 |
| Full operator replacement with NOA-compliant unit | $800 - $1,600 |
| Weld and rust repair on ornamental gate | $150 - $400 |
What moves the price is the condition of the post, not just the panel. If the hinge post is solid, a hinge job is quick. If it’s rotted, we’re digging and resetting, and that’s more time. You’ll hear the number before anything starts, and we don’t add a trip charge for calls inside Miami-Dade County. If you already have a written estimate from another company, bring it: we’ll give you a free second opinion, and if our number’s lower, the choice is yours.
Standing discounts apply on every North Miami job. Take $40 off any repair over $200. Seniors and veterans get 10% off permanently. And we do free estimates on all new gate or operator work. Call (877) 610-2993 and tell us what your gate is doing.
We Also Serve Cities Near North Miami
Our crews run Gate Repair in North Miami and the surrounding neighborhoods all week, and we regularly cross the county line for jobs in Bay Harbor Islands, Surfside, Miami Shores, and Golden Glades. If you’re just east of Biscayne Boulevard or up toward the Golden Glades Interchange, you’re still inside our regular service area, and there’s still no trip charge for the call.
Serving North Miami, FL - Our Local Coverage Area
We’re based in the North Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Miami
A Miami-Dade NOA label tells an inspector that your gate operator has been tested and approved for wind-load pressure under the county’s post-Hurricane Andrew building code, and any welded or structural repair in North Miami is subject to that review. Even a seemingly small hinge replacement can trigger an inspection if the gate’s structural hardware is involved, because Miami-Dade enforces wind ratings more strictly than Broward or anywhere else nearby. We check the label before we quote any repair-versus-replace work, and we only install operators that carry the current approval. Call (877) 610-2993 if you’re not sure whether your gate is compliant; we’ll tell you what you’re looking at.
Plan for gate hinges and operator control boards to last roughly 4 to 6 years in North Miami, not the decade or more you’d see in inland cities like Doral or Miramar. Salt air off Biscayne Bay accelerates oxidation on exposed steel and inside unsealed electronics, and summer lightning storms do their own damage. We recommend inspecting your gate hardware once a year if you live anywhere near the bay or along the coastal corridors. If you’re already seeing rust flakes or the operator cover is starting to corrode, call us before it fails completely.
The sag is almost always in the hinge post, not the panel. Welding a cracked panel without addressing the post buys you a few weeks, maybe a few months, and then it sags again and now the panel is harder to match if replacement becomes necessary. On a ranch property east of Biscayne Boulevard, we replaced a corroded Viking swing gate operator whose board had failed, and the existing post footing was so cracked from years of sag that the gate was leaning three inches out of plumb. We reset the post, installed a fresh NOA-compliant operator, and added a new loop detector for the long driveway. That’s the right order: post first, then panel, then automation.
Lightning almost certainly took out the control board or the loop detector, and in North Miami we see this several times a month during the rainy season. The strike doesn’t have to hit your house; a nearby hit on the utility lines is enough to send a surge through the operator. If the display is dark and the breaker isn’t tripped, that’s a board failure, not a mechanical problem. Call (877) 610-2993 and we’ll tell you over the phone whether it’s worth a service call or whether you can wait a day.
Yes, and this is where North Miami is different from almost anywhere else in Florida. Any structural replacement or significant modification to a gate on a 1950s or 1960s ranch home in 33161 must comply with Miami-Dade County’s Notice of Acceptance wind-load standards, and inspectors do check for NOA labels on new operators and structural hardware. What this means practically is that you can’t simply bolt on any operator or weld in any replacement panel and assume you’re done. We handle the compliance side for you, from choosing approved hardware to making sure the post footing is rated correctly. It’s one of the reasons we do so much work in North Miami that other companies won’t touch.
Call Gatewood Fence & Gate for Gate Repair in North Miami
If your gate is down, sagging, or making a noise it shouldn’t, call (877) 610-2993. A live person answers 24 hours a day, 7 days a week. We’ll give you a straight answer about what’s wrong, what it costs, and when we can be there. Free estimates, no trip charge in Miami-Dade County, and a 90-Day Done Right Promise on every job. Hal Gatewood’s name is on the shop and on every invoice, and that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, fixing gates across South Florida since 2001.





Before
After
Before
After
Before
After