Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across North Creek
Gate repair in North Creek usually means one of three things: a cedar swing gate that’s sagged off its hinge post, an automatic opener from the 1990s that quit mid-cycle, or a latch that won’t catch because the frame warped out of square. Hal Gatewood has been fixing all three since 2001, and a live person answers the phone at (877) 610-2993 whenever you call. If you’re in the 98012 ZIP and your gate won’t open, won’t close, or won’t stay put, we’ll send someone who knows North Creek’s HOA rules and its wet-weather wood problems without you having to explain either. Call for a free estimate, and we’ll quote the price before any work starts.
Why Gatewood Fence & Gate Is North Creek’s Preferred Gate Repair Company
We’re not a franchise rolling through with a scripted pitch. Hal Gatewood’s name is on the shop, his address is published, and his license number is there for anyone to look up. In North Creek, that matters, because most of the gates we service sit in HOA-governed communities where the wrong lumber or the wrong stain tone stops a repair cold. We’ve learned to check the architectural review board’s spec before we source cedar, not after. That’s the difference between getting a gate fixed this week and watching it sit half-done for a month.
North Creek homeowners tend to call us after another company told them to replace a gate we end up repairing. We weld on site, right in your driveway. We don’t haul anything off to a yard or swap parts that don’t need swapping. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
Background-checked, uniformed people show up in the window we promised. Calls are answered live, 24/7, by someone who can actually schedule you. Not a voicemail. Not a queue. If you live near Mill Creek East or off 35th Ave SE, you’ll find we know the neighborhood before we even pull in.
Our Gate Repair Services in North Creek
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. North Creek’s proximity to the stream corridor means ground-level humidity soaks post footings for months at a stretch. We regularly pull rotted cedar posts out of the ground in Mill Creek East and Silver Firs where the boards above look perfectly sound. The fix is a new post set in deeper concrete, new hinges, and a gate that hangs true again. Fix the panel without the post and you’ll fix it twice.

Gate Realignment
Wet-dry cycling is hard on North Creek gates. Nearly 40 inches of annual rain, followed by dry summer stretches, warps gate frames out of square even when the wood hasn’t rotted. Your latch stops catching. Your self-closing hinges fight against the frame. Realigning a gate in North Creek means understanding that the frame may need a tension rod or a corner brace to hold true through the next rainy season, not just a one-time adjustment. We do that, and we show you why it happened so it doesn’t happen again next February.

Electric Gate Repair
1990s-era gate operators around North Creek are reaching the end of their control-board lifespans. Safety photocells from that generation are no longer repairable, and boards fail without warning. That leaves a swing gate stuck mid-cycle, often on a Friday evening when the HOA’s landscapers need to get through Monday morning. We service LiftMaster, Linear, Viking, Ghost Controls, and DoorKing operators. Sometimes a control board can be replaced and retrofitted. Sometimes the honest answer is that a new operator costs less than nursing a 30-year-old board through one more winter. Hal will tell you which is which, and why.

Automatic Gate Repair
Automatic gates in North Creek fail in predictable ways: stripped gears, dead batteries, misaligned photo eyes, and control boards corroded by damp air. We carry parts for most common operators and can often repair the same day we diagnose. For older units where parts are obsolete, we’ll lay out a retrofit path that keeps your existing gate and posts but brings the automation up to current safety requirements. You get a written quote first. Nobody starts work without your sign-off.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Creek
We’re certified to service nine major gate brands, and around North Creek that means a lot of Linear and Viking operators from the late 90s and early 2000s, plus DoorKing units on HOA entry gates. We also see Ghost Controls on newer installations. Because we stock common parts locally, we can usually turn around a motor or board replacement without waiting a week on freight. If your operator is still running but limping, we’d rather repair it than sell you a new one you don’t need.
Common Gate Repair Problems We See in North Creek Homes
- Rotted hinge posts at the post footing. Decades of riparian moisture from the North Creek stream corridor rot posts from below ground up. The gate sags and binds even when every cedar board still looks fine.
- Obsolete control boards on 1990s operators. These fail without warning, often leaving a swing gate stuck open or closed. Safety photocells from that era can’t be sourced anymore, so retrofit decisions have to happen fast.
- Warped frames from wet-dry cycling. Constant rain followed by dry spells twists gate frames out of square. Latches and self-closing hardware fail long before the wood shows visible rot.
- HOA material and stain mismatches. Several communities along the North Creek corridor require cedar (not pine or composite) with a specific stain tone to match existing fencing. A repair stalls mid-job if the wrong lumber shows up.
Pricing for Gate Repair in North Creek, WA
You should know what things cost before you call. A basic hinge replacement on a cedar swing gate in North Creek typically runs $180 to $320, including hardware and labor. Rotted hinge post replacement, which needs a new post, concrete, and realignment, usually lands between $450 and $750 depending on how deep the old footing goes and what the HOA requires for lumber. Gate realignment with a tension rod or corner brace costs $220 to $400. Electric gate motor or control board replacement starts around $340 and can run to $900 or more for an obsolete board that needs a retrofit with new photo eyes and wiring. Every job is quoted upfront. The price Hal gives you is the price you pay, before any work starts. We offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount.
We Also Serve Cities Near North Creek
Our Gate Repair crew covers North Creek and the surrounding communities, including Mill Creek, Mill Creek East, Silver Firs, and Lake Stickney. If your HOA sits along the North Creek corridor or you’re off Bothell-Everett Highway on the north end of the 98012 ZIP, we’re close by. Whether you need a post pulled or a control board retrofitted, we’re the local crew that shows up on time and fixes it right the first pass. For a free estimate on Gate Repair in North Creek, call (877) 610-2993.
Serving North Creek, WA - Our Local Coverage Area
We’re based in the North Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Creek
Because the hinge post, not the hinge itself, is what’s failing. North Creek’s high ground-level humidity rots cedar post footings from below, so the post leans and the gate drops with it. Tightening the hinge straps does nothing for a post that’s decomposing at the base. The repair is a new post set in deeper concrete. Call (877) 610-2993 and we’ll dig it out, set the new post, and hang the gate so it clears the latch side with room to spare.
It depends on the board and the photo eyes. 1990s-era control boards and safety photocells are no longer repairable, and if your operator is original to the house, it may be cheaper to retrofit a modern unit onto your existing gate and posts than to chase obsolete parts. Hal will diagnose it on site and tell you straight. If the operator can be repaired, we repair it. If it can’t, we’ll show you the retrofit path and quote it before any work begins.
Yes, and in several communities along the North Creek corridor, they care a lot. Some architectural review boards specify cedar only, with a particular stain tone to match existing fencing, and they’ll stop a repair if pine or composite shows up on the job. We contact the association’s review board before sourcing materials so the right lumber arrives the first time. It saves you days of delay.
Winter in North Creek means months of near-constant moisture. Cedar gates absorb water, swell, then dry and contract when the rain pauses. The frame twists a few degrees out of square, and the latch bolt no longer lines up with the strike plate. It’s not a latch problem. It’s a frame problem. Realigning the gate and adding a tension rod or brace pulls it back into square so the latch catches through the wet season. Call (877) 610-2993 for an exact quote.
Yes. Modern safety standards require photo eyes or contact edges that stop and reverse a gate if something is in the path. Gates hung before those requirements existed may not have them, and older sensors that are damaged can’t always be sourced. If your gate lacks working safety sensors, we’ll add them as part of the repair. This is a safety issue, and it’s not optional. Call (877) 610-2993 and we’ll get your gate compliant and closing safely.
Call Gatewood Fence & Gate for Gate Repair in North Creek
When your gate quits, you want someone who knows North Creek’s gates, its HOAs, and its weather without a ten-minute explanation. Hal Gatewood has been fixing gates since 2001, and his crew is background-checked and uniformed. We weld on site. We honor the 90-Day Done Right Promise in writing. And we answer the phone live, 24/7, at (877) 610-2993. Call for a free estimate. The price we quote is the price you pay, agreed before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Creek since 2001.





Before
After
Before
After
Before
After