Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across New Franklin
Gate repair in New Franklin usually costs between $190 and $480 when we do it right the first time, and most jobs are handled within one to three days. The frustrating part for homeowners off Manchester Road and across the 44216 ZIP is that the gate worked fine all summer, then March came and it wouldn’t latch or the opener groaned and quit. We fix that. Call (877) 610-2993 and you’ll talk to a live person who knows New Franklin’s gates and the clay they sit on.
Hal Gatewood has run Gate Repair since 2001, and the crew that shows up at your place has worked on more tube-steel farm gates and post-mounted openers than we can count. New Franklin isn’t Akron. The gates here are heavier, the lots are bigger, and the frost goes deeper than most people realize. Knowing that going in saves you money.
Why Gatewood Fence & Gate Is New Franklin’s Preferred Gate Repair Company
We’re the name behind Gate Repair in New Franklin because we answer the phone and we show up. No dispatch queue, no call center three states away. Hal’s name is on the shop and on every invoice we hand you. New Franklin homeowners have been calling us for years because when one of our repairs doesn’t hold, we come back. That’s the 90-Day Done Right Promise, written on the work order, not buried in fine print.
The difference here is that we weld on site. Your gate stays in your driveway while we fix it. If a hinge post has heaved, we re-set it. If a weld cracked, we grind it and burn it back in. We don’t haul your gate off to some shop an hour away and hand you a rental bill for a patch job you’ll need again next spring. And if another company already wrote you an estimate, bring it to us. We’ll give you a free second opinion, and if we can do the same job for less, we’ll show you the numbers.
Every job carries the 90-Day Done Right Promise. Every call is answered by a person, 24 hours a day, seven days a week. New Franklin’s not on the way to anywhere, but we treat it like it’s our own neighborhood, because it is.
Our Gate Repair Services in New Franklin
Hinge & Post Repair
This is the most common call we get in New Franklin between March and May. The soil here isn’t forgiving. Heavy Summit County clay absorbs water all winter, freezes solid, and when it thaws it shifts. A gate post set shallow, or worse, a driven T-post with no concrete at all, moves enough that the gate misses the latch by an inch. We dig down, set the post below frost depth, and rebuild the hinge. Fix the panel without the post and you’ll fix it twice. A sagging gate sags in the hinge post, and that’s where we start.
Gate Realignment
Realignment in New Franklin isn’t just straightening a panel. It’s re-squaring the frame after frost heave, correcting the gap under the latch side, and recalibrating whatever opener is attached so it doesn’t fight the new geometry. Older gates on acreage lots off South Main Street and along the Tuscarawas River corridor tend to be welded steel. They’re heavy. When they shift, you notice. We re-plumb the posts, adjust the hinge barrels, and check the operator’s force settings so the gate doesn’t stall halfway.
Weld & Rust Repair
Road salt and lake-effect moisture do a number on gate hardware around here. Late winter is prime season for seized hinges and rack-and-pinion drives that bind or slip. We weld rust-damaged tubing, patch through-holes, and replace pinion gears on slide gates. If the rust has eaten through a load-bearing section, we’ll tell you straight before we weld it, because sometimes replacement is cheaper than a repair that won’t last. We don’t upsell. We just don’t lie to you about what’s holding and what’s not.
Electric Gate Repair
Electric gate repair in New Franklin often means dealing with a control board that’s been obsolete for ten years. Pre-UL 325 operators without entrapment protection fail in ways that are both annoying and unsafe. We service current boards from Viking, Ghost Controls, DoorKing, and Elite, and we can usually retrofit an older operator to meet current safety standards without scrapping the whole system. If your opener is dead, we’ll check the board, the transformer, and the limit switches before we ever suggest a new motor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in New Franklin
Our crew is certified on nine major gate brands, and around New Franklin we work on Viking, Ghost Controls, and DoorKing most often. We keep common boards, sensors, and hinge hardware stocked so a repair doesn’t stretch into a week of waiting on parts. If your opener is a brand we don’t see every day, we’ll still diagnose it honestly, and we’ll tell you if parts availability makes repair a bad bet versus replacement.
Common Gate Repair Problems We See in New Franklin Homes
- Gate won’t latch after winter. Freeze-thaw cycles heave posts and drive T-post anchors upward, pulling the latch out of alignment. We re-set the post and re-hang the gate so it catches every time.
- Seized hinges and rusted rack drives. Salt runoff from rural roads and months of moisture bind hinge pins and pit slide-gate racks. We press out old pins, weld in new barrels, and clean or replace stripped rack sections.
- Dead opener with no entrapment protection. Pre-UL 325 boards die and leave gates dead or unsafe. We replace obsolete boards and add current safety edges and photocells where code requires.
- Frost-heaved concrete footings. Shallow footings crack and shift, pulling the gate out of square by an inch or more each spring. We dig below frost depth, pour a proper footing, and re-set the post plumb.
Pricing for Gate Repair in New Franklin, OH
A typical hinge and post repair in New Franklin runs $220 to $380 depending on whether we’re re-setting one post or two. Gate realignment jobs usually land between $150 and $275. Weld and rust repair starts around $120 for a single cracked weld and goes up to $500 or more for extensive tube replacement on a heavy farm gate. Electric opener diagnosis and board replacement typically runs $185 to $410, and a full opener retrofit with new safety edges runs higher. The price is quoted and agreed before we touch a single bolt. You know the number when we start, and that number doesn’t change at the door. No trip charge inside Summit County. $40 off any repair over $200. And if you’re a senior or veteran, you get 10% off every job, permanently.
We Also Serve Cities Near New Franklin
If your property sits near the New Franklin line, you’re still in our service area. We handle gate repair in Canal Fulton, Portage Lakes, Barberton, and Norton regularly, and the same crew and the same 90-Day Done Right Promise apply. Call (877) 610-2993 and we’ll tell you when we can be there.
Serving New Franklin, OH - Our Local Coverage Area
We’re based in the New Franklin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in New Franklin
Because the problem isn’t the panel, it’s the post. New Franklin’s clay soil holds water, freezes solid, and expands. A post not set below the 24 to 30 inch frost line heaves upward and tilts, and the gate sags with it. Straightening the panel just moves the misalignment somewhere else. The fix is re-setting the hinge post below frost depth, which is what we do on most of these spring calls.
In most cases, yes. We replace the obsolete control board with a current one, add safety photocells or a monitored safety edge, and recalibrate the force limits. Some very old operators aren’t worth retrofitting because the motor and gear train are already failing, and we’ll tell you that too. Call (877) 610-2993 with the brand and model and we’ll give you an honest read on whether retrofit or replacement is cheaper.
Yes, and this is the single most common repair we do in New Franklin every March and April. Driven T-posts and pipe anchors are not footed against frost. After a hard winter they lift and lean, and the latch misses by an inch. We pull the post, auger a hole below frost depth, set it in concrete, and re-hang the gate so it latches through every season. This is a permanent repair, not a spring adjustment.
Rust and frost. Road salt off rural routes like Manchester Road and South Main Street pits the rack teeth and the pinion gear, and ice inside the track forces the gate to ride high and skip. We clean the rack, replace worn pinion gears, and if the concrete track has heaved, we re-level it before the rack gets destroyed. Ignore the slip and you’ll strip the rack entirely, and that’s a much bigger bill.
A loop detector that’s reading correctly will open the gate when a vehicle pulls up and hold it open until the vehicle clears. If the gate closes on your car or won’t trigger at all, the heave may have shifted the loop wires or moved the gate frame enough to confuse the detector’s field. We test the loop frequency, re-tune the detector, and if the wires are broken we splice or run a new loop. Call us and we’ll check it as part of a standard opener service.
Call Gatewood Fence & Gate for Gate Repair in New Franklin
If your gate won’t latch, your opener quit, or the rust has finally gone through the tubing, call (877) 610-2993. You’ll talk to a live person. We’ll tell you when someone can be there, and the price is locked before we start. Free estimates, no trip charge inside Summit County, and the 90-Day Done Right Promise on every job we do in New Franklin. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving New Franklin since 2001.