Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Murrysville
Gate repair in Murrysville, PA typically runs $180-$340 for hinge and post work, $260-$650 for automatic operator repairs, and $400-$1,100 for full gate realignment with footing reset. Most jobs are finished same day or next morning. If your driveway gate is sagging, grinding, or refusing to close after a freeze, call (877) 610-2993 and a live person picks up, day or night. Hal Gatewood has been fixing gates in the Allegheny foothills since 2001, and he will tell you straight what needs fixing and what does not.
Skip the voicemail maze. We are locally owned and owner-operated, with our name on the shop and our address published where anyone can find it. When you call about gate repair in Murrysville, you get a straight answer and a straight price before any work begins.
Why Gatewood Fence & Gate Is Murrysville’s Preferred Gate Repair Company
Most gate problems in Murrysville are not what a national outfit’s phone quote says they are. A swing gate that drags on the pavement near Blue Spruce Park is rarely a hinge problem. It is a post footing that heaved out of plumb over the winter, and if you fix the hinge without resetting the post, you will fix it twice. We have been saying that to homeowners in the 15668 zip code for over two decades, and we say it because we have seen the other guy’s work and had to redo it.
Murrysville customers keep our number because Hal Gatewood’s crew does the job in the driveway, not in a warehouse. We weld on site. We reset footings below frost line. We do not haul your gate to a shop two counties away and call you in three weeks. The person who answers your call is the person who knows the difference between a Linear operator fault and a stripped gear in a Viking arm. Every repair carries our 90-Day Done Right Promise in writing. If it is not done right, one call brings us back. No runaround.
We also publish a license number anyone can look up. Hal’s name is on the shop and on every invoice. That is the oldest accountability there is, and it matters when you are trusting someone with a 600-pound ornamental gate that your grandkids walk under.
Our Gate Repair Services in Murrysville
Gatewood Fence & Gate handles the full range of Gate Repair work, but in Murrysville, three problems dominate: hinge and post failures, automatic operator trouble, and gate realignment on sloped driveways. Each one gets its own approach, because each one fails differently on these hills.
Hinge & Post Repair
In Murrysville, hinge and post repair is the most common call we run, and it is almost always a footing problem. Western Pennsylvania’s hard freezes followed by thaw cycles heave gate post footings out of plumb every spring. A gate that swung clean in October drags across the asphalt by March. We dig the footing to 42 inches, below the frost line, re-pour the concrete, and re-hang the gate with fresh bearings. Adjusting the hinge alone is a temporary patch, not a repair.
Automatic Gate Repair
Murrysville’s hillside lots send snowmelt and runoff straight to gate bases, which means underground operators flood more often here than in flat Pittsburgh suburbs. If your opener shorts out after a thaw or moans when it runs, the control board or motor may have taken on water. We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we waterproof the housing so the next thaw does not do the same thing.
Gate Realignment
On sloped driveways common throughout Murrysville’s hilly residential areas, uphill-swinging gates develop sag and ground-drag almost every spring as footings shift with frost heave. A true realignment means resetting the post, not just cranking the hinge bolts. Our team checks plumb on both posts, re-levels the gate, and runs the opener through full cycles until it moves without strain. Show me the gate closing on its own and I will show you where it is failing.
Electric Gate Repair
Electric gate systems in Murrysville include the opener, safety edges, photo eyes, and wiring run. When the gate stops responding to a remote or reverses midway, the fault is often in the control board, a limit switch, or a corroded connection inside the operator box. We diagnose on site, show you what failed, and give you the price before we turn a wrench. Seniors and veterans get a permanent 10% discount on every repair, and any repair over $200 takes $40 off. No haggling needed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Murrysville
Our crew is certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep parts on the truck for the most common failures we see around Murrysville, which means less waiting on a warehouse shipment. If you have a Linear swing arm that froze solid this winter or a Ghost Controls receiver that will not hold a signal, we can usually diagnose and repair it the same trip. Our Gate Repair team works on all of them, and we do not push you toward a replacement when a $40 board repair gets the gate running.
Common Gate Repair Problems We See in Murrysville Homes
- Post footings heave out of plumb. Hard freeze-thaw cycles shift the concrete below your posts, causing swing gates to bind against the ground on sloped driveways. We reset the footing to 42 inches, below the frost line, and re-hang the gate true.
- Underground operators flood with snowmelt. Hillside lots channel runoff directly to gate bases, shorting control boards and motors. We repair the damage and waterproof the housing so the next thaw does not repeat it.
- Hinges seize with rust. Moisture from repeated thaws sits trapped in the hinge post on ornamental iron gates. Fresh grease masks it; replacing the bearings and re-aligned the hinge fixes it.
- Uphill swing gates sag and drag each spring. On sloped entries, a gate that drags tells you the footing has moved. Flat-suburb contractors often adjust the hinge and call it done. We reset the post, because the gate sags in the hinge post, not in the middle.
Pricing for Gate Repair in Murrysville, PA
Here is what we charge in Murrysville’s market, straight up.
- Hinge and post repair: $180-$340, including new bearings, re-setting one post, and re-hanging the gate.
- Automatic operator repair: $260-$650, depending on whether the board, motor, or limit switch failed.
- Full gate realignment with footing reset: $400-$1,100, including digging below frost line, re-pouring the post footing, and cycling the opener until it runs clean.
- Weld and rust repair: $120-$280, done on site so your gate never leaves the driveway.
The price is quoted and agreed before any work starts. Not an estimate that drifts at the door. Not a phone quote that changes when the tech arrives. You get the number, you say yes or no, and the number does not move. There is no trip charge inside the county, and if you have a written estimate from another company, we will give you a free second opinion. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near Murrysville
Our Gate Repair in Murrysville crews also cover Plum, Monroeville, Turtle Creek, and North Versailles. We schedule service across Westmoreland and eastern Allegheny counties, and dispatch is coordinated from our Philadelphia office while crews work locally. If you are just over the Murrysville line, you get the same owner-operated service, the same upfront pricing, and the same 90-Day Done Right Promise.
Serving Murrysville, PA - Our Local Coverage Area
We’re based in the Murrysville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Murrysville
Because Murrysville sits in the Allegheny foothills, and the freeze-thaw cycle heaves your post footings out of plumb each winter. The gate does not sag in the middle; it sags at the hinge post. The fix is re-setting the footing to 42 inches, below the frost line, not just tightening the hinge bolts. Call (877) 610-2993 and we will dig it right the first time.
Yes. This is one of the most common automatic gate failures we see in Murrysville. Snowmelt and runoff pool at gate bases on hillside lots, shorting control boards and motors. We repair or replace the damaged components and waterproof the housing so the next thaw does not kill it again. Prices run $260-$650 depending on what failed.
A grinding noise when the gate moves is usually the operator straining against a hinge or footing that has shifted. In Murrysville, the culprit is almost always frost heave on the post. We check plumb on both posts, check the opener’s limit switches, and tell you exactly which part is failing. Bring us the symptom and we will show you the cause.
Yes. We weld on site, so the gate stays in your driveway. We cut out the rusted section, weld in new steel, re-hang the gate with fresh bearings, and treat the area so moisture does not sit in the hinge post again. Weld and rust repair in Murrysville runs $120-$280.
Check whether the gate is binding on the ground, especially if your driveway slopes. If it is, the post footing likely heaved, and the opener’s force limit is stopping the gate to avoid damaging the arm. We reset the footing and re-run the opener. If the gate moves freely and still will not close, the limit switch or board is a likely suspect. Either way, call us and a live person answers, 24/7.
Call Gatewood Fence & Gate for Gate Repair in Murrysville
If your driveway gate is sagging, grinding, or dead after a freeze, call (877) 610-2993 now. A live person picks up, not a voicemail, not a chatbot. Hal Gatewood’s crew will come out, diagnose the problem on site, and give you a written price before any work begins. Free estimates, no trip charge inside the county, and a 90-Day Done Right Promise in writing on every job. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Murrysville since 2001.