Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Medfield
Gate repair in Medfield usually costs between $240 and $620 for most hinge, realignment, and operator fixes, and we can typically have someone at your driveway within a day of your call. If a gate is sagging, binding, or refusing to close, the problem is almost never the panel itself. It is the post, the hinge, or the operator underneath, and that is exactly where we start.
We are Gatewood Fence & Gate. Hal Gatewood has been fixing gates since 2001, and the name is on the shop and on every invoice. If you live off South Street, North Street, or any of the long private drives that wind through Medfield’s wooded lots, call (877) 610-2993. A live person answers, day or night.
Why Gatewood Fence & Gate Is Medfield’s Preferred Gate Repair Company
Medfield is not a town where people settle for a gate that groans. The properties here, especially the colonial revivals and estate-style homes set back on wooded acreage, have some of the heaviest and best-built gates in Norfolk County. When one of those gates fails, the homeowner wants a repair, not a sales pitch for a full replacement. That is how Hal built the business. He welds on site, in your driveway, and the gate stays where it belongs.
Customers around Medfield call us because the person who answers the phone is the same person who shows up. Every job carries the 90-Day Done Right Promise in writing. If it is not right, one call brings Hal back. No runaround, no voicemail tag, no dispatch queue. We publish our address and license number, and anyone can look them up. That is the oldest accountability there is.
Scheduling and dispatch for Medfield service are coordinated from the Boston office, but the crews work locally and know these roads. We know that a gate off Pine Street faces the same frost heave as one off Indian Hill Road, because we have undercut posts in both places. We stock parts for LiftMaster, FAAC, BFT, Linear, and Viking operators, so most Medfield repairs do not wait on a part shipped from somewhere else.
Our Gate Repair Services in Medfield
Electric Gate Repair
When a Medfield homeowner calls saying the gate will not open, the first thing we check is whether the operator is fighting the gate or the gate is fighting the operator. A swing gate on a property off Main Street might have a perfectly good motor that is being overworked by a hinge post that frost heaved out of plumb over the winter. We test the operator under load before replacing anything. On electric gate repair in Medfield, expect to spend $260-$540 for typical board, receiver, or limit switch work, and more if a post or arm is involved.
Automatic Gate Repair
Automatic gates on the newer large-lot developments around Medfield get heavy daily use. The safety photocells, loop detectors, and gear mechanisms take a beating through every freeze-thaw cycle. A gate that opens halfway and reverses, or one that will not hold position, usually points to a sensor or limit issue rather than a motor failure. We service LiftMaster, FAAC, BFT, Linear, and Viking automatic operators regularly. A diagnostic visit is free inside Norfolk County, and we quote a fixed price before any wrench turns.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That is the sentence we repeat more than any other in Medfield. The town’s frost line runs roughly 48 inches deep, and many older estate gates, particularly the wrought-iron ones on 19th-century properties near the town center, have posts set far shallower. Every winter they heave. Every spring the gate drags. Instead of just shimming the hinge, we dig the post, reset it below frost depth with proper concrete, and weld the hinge tabs back square. Hinge and post repair in Medfield typically runs $320-$680 depending on post size and how far out of plumb it has moved.
Gate Realignment
Realignment is the repair most Medfield gates actually need, and the one national outfits skip because it is labor, not parts. We measure the post, the panel, the latch point, and the operator travel path as one system. Then we fix what moved. A realignment on a typical double swing gate off Route 109 costs $240-$420. Add a post reset and you’re in the $500-$700 range. In every case, the price is quoted and agreed before work begins. What we quote is what you pay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Medfield
We are certified to service nine major gate brands, and around Medfield we see a lot of FAAC and BFT operators on the higher-end European-built gates, plus Linear and Viking on domestic slide and cantilever systems. Because we stock common boards, arms, receivers, and safety edges locally, most Medfield jobs are completed in one visit. If you bought a property and inherited an operator you do not recognize, call us. Hal will identify it, tell you honestly whether it is worth repairing, and give you a written price.
Common Gate Repair Problems We See in Medfield Homes
- Frost heave on shallow posts. Medfield’s 48-inch frost line punishes any post set above it. The post rises each winter, the gate drags, and the operator burns out trying to compensate. The fix is resetting the post below frost depth, not cranking the opener harder.
- Storm damage from the tree canopy. Medfield’s dense oak and maple canopy is beautiful until a nor’easter drops a limb on your driveway gate. Dented panels, twisted racks, and slide gates knocked off their tracks are routine calls after every big storm here.
- Road salt rust. Route 109 and the town roads get heavy salt through the winter. Wrought-iron hinges and exposed hardware corrode fast, seize up, and eventually snap. We cut out rusted sections and weld in new steel on site, then coat and seal against the next season.
- Safety sensor failures. A gate that does not reverse when a car or child is in the way has a safety system problem, usually a misaligned photocell or a damaged loop detector. This is a serious safety issue, not a convenience fix. We treat it as urgent.
Pricing for Gate Repair in Medfield, MA
Here is what Medfield homeowners can expect to pay, based on the work we actually do in this town. A hinge and post repair runs $320-$680. A full gate realignment runs $240-$420. Electric or automatic operator repair runs $260-$540. Weld and rust repair on ornamental iron runs $180-$400 per section. Safety sensor replacement runs $140-$280. These are fixed quotes, written before work starts, not estimates that change at the door.
We run standing offers that do not require haggling: $40 off any repair over $200, no trip charge inside Norfolk County, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and you will get a real number from a real person.
We Also Serve Cities Near Medfield
When Medfield customers ask, we also cover Millis, Walpole, Norfolk, and Norwood. The same crew, the same 90-Day Done Right Promise, and the same live person on the phone. If you are searching for Gate Repair in Medfield or a neighboring town, we show up the same way: on time, with the right parts, ready to weld.
Serving Medfield, MA - Our Local Coverage Area
We’re based in the Medfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Medfield
Because the hinge post is moving, not the gate. Medfield’s frost line sits roughly 48 inches down, and any post set shallower will heave upward through the winter, pushing the gate out of alignment. Adjusting the latch or the hinges in the fall does nothing to stop the post from moving. The only lasting fix is digging the post, setting it below frost depth, and then realigning the gate. Call (877) 610-2993 and we will inspect the post depth before quoting anything.
First, do not try to lift the gate or force it open. Power down the operator at the breaker if you can reach it safely, and keep clear of the panel until the limb is removed. What you are checking for is whether the gate is still on its track or hinges, and whether the opener is making any sound at all. Do not attempt to straighten a twisted rack or re-hang a heavy panel, that is how people get hurt. Call us, and we will remove the gate from the operator safely, assess the hinge post and panel, and give you a written repair price before anything is ordered.
Yes, and it does every winter. The salt spray from Route 109 and the town roads accelerates corrosion on exposed wrought-iron hinges, latch hardware, and any bare steel. Joints seize, welds fail, and one day the gate feels stiff, then it snaps. We grind out the rust, weld in fresh steel, and recoat the repaired section so it can hold up through the next salted season. If you live near Route 109 or any heavily treated road in the 02052 zip, check your hinges in early spring.
The housing should be dry and sealed, the drain should be clear, and the foundation box should sit below the 48-inch frost line so the cold does not crack the casing or warp the mount. Underground operators on Medfield’s newer estate properties fail most often from water intrusion and frost movement, not mechanical wear. We service FAAC, BFT, and Linear underground units, and we will tell you honestly whether your box is set deep enough to survive a Norfolk County winter.
Yes, it is a serious safety issue. Automatic gate operators in Massachusetts must reverse on contact and stop on obstruction detection. If yours does not, you need to disable it until it is fixed, especially if children, pets, or delivery drivers use the driveway. The problem is usually a failed safety edge, a misaligned photocell, or a bad loop detector. It is rarely the motor. We fix these the same week, and the repair almost always falls in the $140-$280 range. Call (877) 610-2993 and tell us the gate is not reversing, we will treat it as urgent.
Contact Gatewood Fence & Gate in Medfield
If your gate is sagging, rusted, frozen, or just not right, call (877) 610-2993. A live person answers 24/7. You will get a straight answer, a fixed price before any work starts, and a 90-Day Done Right Promise in writing, from a shop whose name is on the door. Hal Gatewood has been at this since 2001, and he will be the one standing in your driveway off Route 109, welding your gate back square instead of selling you a new one.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.