Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Martinez
Most gate repairs in Martinez run between $180 and $650 depending on the failure, and we can usually have someone at your property within 24 to 48 hours. If you live anywhere from the historic downtown core up into the hills above Alhambra Avenue, call us at (877) 610-2993 and Hal or one of his crew will come look at the gate in person. Gate repair in Martinez is not like inland work. The Carquinez Strait is right there, and the salt air eats hardware fast. That changes what parts we stock, what we weld, and how we fix a gate so it stays fixed.
Why Gatewood Fence & Gate Is Martinez’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is on every invoice. We show up with our own truck, our own welder, and the right stainless hardware for Martinez conditions. Homeowners near the waterfront and up in the hills have called us after bigger companies swapped a part, charged the card, and disappeared. We do not work that way. Every job carries the 90-Day Done Right Promise in writing. If something is not right, one call brings Hal back. No runaround.
We answer the phone around the clock with a live person, not a voicemail tree. That matters when your gate will not close and your driveway opens onto a busy street off Center Avenue. We also know the local terrain here. Tight lots in the historic core, sloped drives in the hills, shared easements on narrow rights of way. Those conditions are part of how we diagnose a gate in Martinez, because they are not problems you find in Pleasant Hill or Walnut Creek.
Our customers in Martinez mention the same things in their reviews. We show up in the window we promised. We weld on site instead of hauling the gate away. And we tell you the price before any work starts, in writing. That is a core promise, not a footnote.
Our Gate Repair Services in Martinez
Electric Gate Repair
An electric gate in Martinez that will not open or close usually starts with either a failed operator board or a stripped gear in the motor assembly. Near the strait, we also see a lot of corrosion inside the operator arm itself, especially on gates that face the water. We service Linear, Viking, Ghost Controls, and DoorKing operators, and we can usually rebuild the drive rather than replace the whole unit.
Automatic Gate Repair
Automatic gate systems this close to the Carquinez Strait get beaten by wind and salt moisture at the same time. Actuator arms fatigue, safety photocells drift out of alignment, and limit switches corrode. When an automatic gate reverses mid-cycle or will not latch closed, we trace it back to the exact failing component and repair it on site. No unnecessary part swaps.
Hinge & Post Repair
This is the most common gate repair call we get in Martinez, and for a very local reason. The hinge post is the structural anchor of the whole gate, and in this city the salt air rusts the post at the base faster than anywhere else in Contra Costa County. We cut out the rotted section, weld in a hot-dip galvanized replacement with a marine-grade anchor, and reset the hinges square. Fix the panel without the post, and you will fix it twice.
Gate Realignment
Martinez hillside streets create a lot of settling under gate posts, and that pulls swing gates out of plumb and binds slide gates on their tracks. A sagging gate stops latching, scrapes the driveway, and overloads the operator. We realign the hinges, level the post, and adjust the rack so the gate travels clean. On historic properties, we keep the original iron look while making the gate work like it should.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Martinez
We are certified to service nine major gate brands, and around Martinez we work on Linear, Viking, Ghost Controls, and DoorKing systems most often. Because we know what the salt air does to these operators, we keep upgraded Stainless and galvanized replacement parts on the truck for Martinez calls rather than having to order them. That means a shorter wait for you and a repair that is built for this climate, not for a warehouse in Arizona.
Common Gate Repair Problems We See in Martinez Homes
- Rusted-through hinge posts. This is the defining Martinez failure. Salt-laden wind off the Carquinez Strait attacks the post at ground level, and within two to three years a standard powder-coated post can be structurally gone. We replace the base and anchor with hot-dip galvanized stock, then hang the hinges on stainless hardware.
- Bind and strip on sliding gates in tight easements. In the historic core, a lot of homes share driveways or sit on narrow rights of way. Sliding gates get squeezed into spaces a swing gate cannot fit. But when hillside settling shifts the concrete, the rack and pinion bind and eventually strip. We realign the track and gear so the gate runs clean instead of chewing itself apart.
- Safety photocell misalignment from strait winds. Persistent wind stress on operator-mounted photocells and actuator arms means gates reverse for no reason or refuse to close. This is repairable, and often it is a matter of remounting and shielding the sensors, not replacing them.
- Seized latches and rusted springs on older ornamental gates. The Craftsman bungalows and Victorian-era homes east of downtown often have original iron gates that have stood for generations. The latch seizes, the spring snaps, and the gate swings loose. We weld and rebuild these with material that looks right for the period and holds up to the marine air.
Pricing for Gate Repair in Martinez, CA
A hinge and post repair in Martinez typically runs $280 to $520, depending on how much of the post base has to be cut out and rebuilt. Gate realignment work is usually $180 to $360. Electric and automatic gate repairs land between $200 and $650, with operator rebuilds on the higher end when the drive gears are stripped. Weld and rust repair on an ornamental iron gate generally falls between $150 and $450. Here is how the common calls break down:
| Repair Type | Typical Martinez Range |
|---|---|
| Hinge & Post Repair | $280 - $520 |
| Gate Realignment | $180 - $360 |
| Electric Gate Repair | $200 - $650 |
| Weld & Rust Repair | $150 - $450 |
We quote the price in writing before any work starts, and you approve that number before we touch the gate. There is no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and Hal will walk you through the numbers himself.
We Also Serve Cities Near Martinez
We regularly run calls to Pleasant Hill, Contra Costa Centre, Waldon, and Benicia for homeowners dealing with the same gate failures and operator trouble. Whether you are in Martinez proper or just over the line, our Gate Repair crew brings the same on-site welding and the same written 90-Day Done Right Promise. If you are in Martinez, you are already in our service area.
Serving Martinez, CA - Our Local Coverage Area
We’re based in the Martinez area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Martinez
The Carquinez Strait funnels persistent salt-laden winds directly through Martinez, and that moisture deposits on any exposed steel. We routinely see standard powder-coated hinge posts rust through at the base in under three years this close to the water, while the same part would last a decade inland. The fix is material, not paint: hot-dip galvanized posts and marine-grade stainless hinges. Call (877) 610-2993 for an exact quote and we will tell you what your gate actually needs.
Yes, and we do that often in the older neighborhoods around downtown, where lots are tight and rights of way leave no room for a swing arc. A slide gate tucks along the fence line. The caution in Martinez is that hillside settling will eventually throw the track out of alignment, so the rack and pinion need periodic realignment to avoid binding. We install and maintain slide gates on these easement lots regularly. Call (877) 610-2993 for a free measure and a written price.
The strait wind loads the actuator arm constantly, so the operator works harder and fatigues sooner than one inland. The same wind knocks safety photocells out of alignment, which is why so many automatic gates in Martinez reverse mid-cycle or refuse to close. We rebuild the drive, shield the sensors, and use corrosion-resistant fasteners so the repair lasts. Call (877) 610-2993 and Hal will come diagnose it on site.
Almost never. The sag is in the hinge post, not the panel. On a hillside street above downtown Martinez, we rebuilt a Craftsman-era swing gate whose hinge post had rusted through at the base from years of salt exposure. We replaced the footing with a hot-dip galvanized anchor, hung marine-grade stainless hinges, realigned the gate so it cleared the sloped driveway by a full inch, and upgraded the keypad to a stainless enclosure. The original iron stayed. That is a repair-first fix, and we do it all the time here. Call (877) 610-2993 and we will look at your post before we talk about replacing anything.
Yes. We prop and brace the gate in place, cut out the rotted section, weld in the new base, and keep the gate set so you can still use the walk gate and, in most cases, the vehicle gate while the work is underway. We have done this on shared driveways and narrow easement lots throughout the historic core, where the gate has to stay functional during the repair because the driveway is the only way in. Call (877) 610-2993 and we will schedule the repair around your access needs.
Contact Gatewood Fence & Gate in Martinez
If your gate is sagging, rusted through at the post, or the operator will not close, call (877) 610-2993. Hal Gatewood answers the phone, or one of his crew does, twenty-four hours a day. We will give you a written price, show up when we say we will, and do the work right here on your property. The 90-Day Done Right Promise goes on every job. If it is not right, we make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Martinez since 2001.