Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Longwood
Gate repair in Longwood, FL typically costs $185-$475 for most hinge, post, alignment, and operator-board jobs, and we can usually get to homes within the 32750 and 32779 ZIPs on the same day or next morning. If your gate is sagging, dragging, beeping but not moving, or stuck open on Markham Woods Road, call us at (877) 610-2993 and Hal or one of our crew will answer, not a phone tree. We’ve been working on Longwood’s gates long enough to know the difference between a 1991 custom wrought-iron estate gate and a 2004 HOA entry system, and we bring the right parts for both on the first trip.
Why Gatewood Fence & Gate Is Longwood’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 because he kept seeing gates that got replaced when they should have been repaired. That repair-first habit is why Longwood homeowners call us back. We weld on site in your driveway, so we don’t haul your custom gate off to some shop and hope it comes back straight. When a Longwood customer calls with a sagging ornamental gate on a Markham Woods property, we know the post is the problem before we even park the truck, because we’ve seen that exact failure a hundred times in this soil.
Longwood reviews mention the same things: a live person picked up the phone, the crew showed up in the window they gave, and the final bill matched the quoted price. Every job, from a simple hinge replacement to a full operator board swap, comes with our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No fine print, no runaround. And because we’re locally owned with a published address and license number, you can drive to the shop and look Hal in the eye if you ever want to.
Our response time to Longwood is usually same-day for urgent gate-down calls and next morning for routine alignment work. We don’t route you through a call center. The person who answers at (877) 610-2993 is someone who actually works on gates.
Our Gate Repair Services in Longwood
Electric Gate Repair
Lightning is not polite in Longwood. From June through September, the afternoon storms roll through Lightning Alley and take out operator circuit boards, keypad entry systems, and photocells on gates all over 32779 and 32750. We replace boards on Linear, FAAC, Viking, DoorKing, and Ghost Controls operators, and we keep the most common control boards on the truck so we can usually finish an electric gate repair in Longwood in one visit.
Automatic Gate Repair
An automatic gate that won’t open, opens halfway then reverses, or grinds on the rack is usually a calibration problem, not a reason to buy a new operator. On Longwood’s estate properties, the bigger issue is that the posts have moved. The operator gets blamed, but the post drift is what throws the travel limits out. We fix the post first, then recalibrate the operator. If your opener is genuinely dead, we replace it with a current model from the brand you already trust, and we wire it into your existing keypad and loop detector where possible.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. In 32779 especially, where large lots along Markham Woods Road and Wekiva Springs Road get heavy irrigation, the sandy-clay soil goes through wet-dry cycles that slowly push gate posts out of plumb. A 30-year-old custom wrought-iron gate with a leaning post will drag on the latch side, stress the hinges, and eventually snap a weld. We re-foot posts in concrete, re-align the hinge barrels, and weld any hairline cracks before they become a gate on the ground.
Gate Realignment
When an automatic gate starts binding, scraping the ground, or reversing for no reason, the fix often starts with realignment. On estate gates in Longwood, years of subtle post movement combined with heavy ornamental panels means the gate is no longer traveling on the plane it was set to in 1991. We reset the hinge geometry, re-shim the post saddles, and re-calibrate travel limits so the gate opens and closes cleanly through its full arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Longwood
We’re certified to service Linear, Viking, Ghost Controls, DoorKing, FAAC, BFT, LiftMaster, Elite, and Mighty Mule. For Longwood customers, that means we stock the boards, remotes, edge sensors, and loop detector parts for the brands we see most often in this area without making you wait a week for shipping. The old Ghost Controls and Linear operators installed on 1990s Longwood estates are especially common on our work orders, and we keep the retrofit components to upgrade them without replacing your custom gate itself.
Common Gate Repair Problems We See in Longwood Homes
- Lightning-fried operator boards. Longwood sits squarely in central Florida’s Lightning Alley, and June-September storms routinely take out circuit boards and keypad entry systems on gates throughout 32779 and 32750. We see a predictable annual spike, and we keep replacement boards on hand.
- Post lean from irrigation and sandy-clay soil. On the Markham Woods corridor, heavy irrigation plus Seminole County’s mixed sandy-clay soil creates repeated wet-dry cycles. Over years, the hinge posts drift out of plumb, the gate drags, and the travel limits fall out of calibration.
- Corroded ornamental steel hinges and post footings. Central Florida humidity does real damage to 30-year-old ornamental steel. We regularly repair corrosion at hinge welds, post base plates, and actuator mounting points on vintage Longwood estate gates.
- Failed safety photocells and loop detectors. Older automatic gates in Longwood were often installed with first-generation safety edges and photocells that have since failed or been bypassed. A gate that reverses on nothing, or won’t close at all, usually has a dead loop detector or misaligned safety beam.
Pricing for Gate Repair in Longwood, FL
In Longwood, most hinge replacements run $185-$325 depending on the gate weight and whether the post needs shimming. Gate realignment typical costs $225-$475 for a single swing gate, and operator board replacement for the brands we see on Markham Woods typically lands between $265-$550 including the part and calibration. Post re-footing, which is common in 32779 where irrigation has pushed posts out of plumb, generally starts around $400-$800 and rises with gate weight and finish work. You’ll always get the full price in writing before the first tool comes off the truck, and the price we quote is the price you pay. Seniors and veterans get a permanent 10% discount, and any repair over $200 carries an automatic $40 discount. If you have a written estimate from another company, bring it - we’ll give you a free second opinion and often save you the cost of a full replacement.
We Also Serve Cities Near Longwood
Our Gate Repair team works throughout Seminole County, and we regularly take calls from homeowners in Lake Mary, Casselberry, Winter Springs, and Altamonte Springs. If you’re in one of those communities, you’ll get the same live-answer phone support and the same 90-Day Done Right Promise. We also have a dedicated page for Gate Repair in Longwood with more detail on neighborhoods and pricing for this side of the county.
Serving Longwood, FL - Our Local Coverage Area
We’re based in the Longwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Longwood
Because the soil there is sandy-clay and the lots are big enough that irrigation runs heavily year-round, which means the ground around the posts never dries out consistently. The repeated wet-dry cycle pushes hinge posts out of plumb a few degrees over a decade or two, and once a post leans, the gate binds, drags, and pops travel limits no matter how many times you adjust the operator. Fix the panel without the post and you’ll fix it twice. Call (877) 610-2993 and we’ll tell you honestly whether your gate needs a post re-foot or just a hinge adjustment.
Yes, for Longwood and much of central Florida it’s a predictable annual cycle. From June through September, afternoon lightning storms in Lightning Alley surge through power lines and take out older operator boards and keypad systems. If your board has died more than once in the same season, the board is usually the symptom, not the root cause - older boards lack the surge protection of current models, and the fix is a replacement board with proper grounding and a surge protector on the circuit. We can do that for most 1990s operators without replacing the whole unit.
UL 325 is the safety standard that requires automatic gates to reverse when they encounter an obstruction, using sensors like photocells, edge sensors, or a motor that detects resistance. If your gate was installed in the early 1990s, it may have original safety equipment that no longer meets current code, or it may have been bypassed at some point. Ask any gate company to demonstrate the entrapment protection before they finish the job. We show every Longwood customer theirs working, and we never leave a gate running without functioning safety sensors.
A failing loop detector usually shows up one of two ways: the gate opens fine but won’t close on its own, or it opens when nothing is near the driveway. On a slide gate, a dead loop detector is especially dangerous because the gate may close into a car that’s already on the loop. On a swing gate, the symptom is usually the gate closing too early or not holding open long enough. Both use the same buried wire loop, and we can diagnose a failing detector with a meter in less than an hour at most Longwood properties.
Yes. The gate itself is almost never the problem, and a custom wrought-iron gate from the 1990s is usually worth keeping. We can retrofit a new Ghost Controls operator or another brand onto your existing gate, reusing your current hinge mounting where possible and adding modern safety edges and photocells. The new operator gets calibrated to your gate’s actual weight and travel, and the whole job carries our 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal founded the company in 2001 and still picks up the phone.
If your gate is sagging, grinding, or dead, call us at (877) 610-2993 for a free estimate. We’ll quote the price upfront, stand behind it, and fix the gate in your driveway. The name is on the shop, and the shop is down the road - that is the oldest accountability there is.