Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Little Falls
Gate repair in Little Falls runs $180-$540 for most hinge, post, and realignment work, and we typically get a crew out to your driveway within 24 to 48 hours. If you live along the Passaic River in the 07424 flood zone, you already know gates here fail differently than they do in Totowa or Woodland Park. We’ve been fixing them since 2001, and we quote the price before any work starts. Call (877) 610-2993 and you’ll get a live person, not a phone tree.
Our Gate Repair team works on iron gates, chain-link gates, wood gates, and the operators that move them. We weld on site in your driveway. We don’t haul your gate to some shop across the county while you wait a week. Most Little Falls repairs are done in one visit.
Why Gatewood Fence & Gate Is Little Falls’s Preferred Gate Repair Company
Hal Gatewood started this business in 2001 because he kept seeing gates that had been “repaired” by someone who swapped a part and left the real problem untouched. A gate sags in the hinge post, not in the middle, and that is where we start. Fix the panel without the post and you’ll fix it twice. That’s the kind of thing you only learn by doing the work in one town long enough to see your own repairs hold up through a few Passaic River flood seasons.
Little Falls homeowners call us because the name is on the shop, and the shop is down the road. Hal’s address is published, his license number is something anyone can look up, and when you call at 2 a.m. because your gate won’t close and the dog is out, Hal or someone on his crew answers. Not a voicemail. Not a call center three states away.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings him back, no runaround. That’s it. That’s the whole guarantee, and it’s stamped on every invoice.
Our Gate Repair Services in Little Falls
Hinge & Post Repair
This is the bread-and-butter work in Little Falls, and it’s what we do more than anything else. A 1950s iron gate on Wilmore Road or a chain-link gate behind a split-level off Long Hill Road has been sitting in humid air and floodwater for 60 years. The hinges corrode. The post footings crack or heave. Hinge and post work in Little Falls typically runs $180-$380 depending on whether we’re resetting one post or both and whether the old concrete needs to come out. We dig it, set it deeper than it was, and weld the hinge plates back on square.
Gate Realignment
After a high-water event on the Passaic, gates rack out of square. Wooden gates swell. Iron gates twist. The latch stops meeting the striker. Realignment work in Little Falls usually costs $150-$300 and involves pulling the gate back to square, shimming or replacing hinges, and setting the latch so it closes true. If you live anywhere near Peckman Brook or the river bends, this is a repair you’ll likely need after every serious flood season.
Weld & Rust Repair
Rust is the quiet killer of gates in Little Falls. The floodwater deposited silt that sat against hinge hardware and post bases for days after Irene. That silt holds moisture against steel for months. We cut out rusted sections, weld in new steel, and grind it smooth. Weld and rust repair generally runs $120-$350 per section depending on how far the rot has spread. We do this on site, with a welder in the truck, so the gate stays in your driveway.
Electric Gate Repair
Automatic gate operators in Little Falls are often original to the house, which means 1990s-era control boards that lack modern UL 325 entrapment protection. If your gate motor hums but won’t move, or the remote stopped working after a storm, call us. Electric gate repair in Little Falls typically runs $140-$420 for board diagnosis, limit switch repair, and sensor replacement. We service Viking, Ghost Controls, DoorKing, and Elite operators, among others. But here’s the honest part: on a 30-year-old operator with no photo-eyes and a dead board, replacement is sometimes cheaper than repeated board swaps. Hal will tell you that straight, because he’d rather you spend money once.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Little Falls
Certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Little Falls customers with a Viking, Ghost Controls, or DoorKing operator, we keep common boards, limit switches, and remotes on the truck so we’re not waiting on a parts shipment. If your operator is a Ghost Controls swing arm on a 1970s gate, we know that setup well. The parts that fail after a Passaic flood are predictable, and Hal stocks for them.
Common Gate Repair Problems We See in Little Falls Homes
- Silt-packed hinge hardware after Passaic River floods: Floodwater deposits fine silt into hinge knuckles and post bases. Once that silt dries, it grinds the hinge, binds the gate, and speeds up rust. We flush, re-grease, or replace hinges on flood-adjacent properties every spring.
- Frost heave cracking 1950s concrete post footings: Little Falls freeze-thaw cycles are rough on shallow footings. Groundwater gets into concrete hairline cracks, freezes, and pries the footing apart. A post that was plumb in October is leaning by March. We dig footings deeper than the frost line when we reset them.
- Obsolete control boards on legacy gate operators: Pre-2005 automatic gate operators in Little Falls often lack photo-eyes, edge sensors, and auto-reverse. Parts for these boards are discontinued. We can retrofit safety equipment where the operator allows, but some boards simply need to be retired.
- Racked wooden gates after high-water events: Saturated wood swells, then dries unevenly. The gate twists in its frame, and no amount of latch adjustment will fix a panel that’s racked. We re-square, brace, or replace the boards and then set the hinges true.
Pricing for Gate Repair in Little Falls, NJ
A typical hinge repair or post reset in Little Falls runs $180-$380. Gate realignment is usually $150-$300. Electric gate diagnosis and board work ranges $140-$420. Full weld-and-rust repair on an iron gate can run $120-$350 per section. A complete post replacement with new concrete footing, when the old one is shattered beyond salvage, generally lands between $400 and $700.
What affects the price is what we find when we open it up: how deep the rust goes, whether the old footing is reusable, and whether the operator is worth saving. You get the price before we touch anything. Standing offers: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Little Falls
Gate Repair in Little Falls keeps us busy, but we also make the short drive to Cedar Grove, Brookdale, Upper Montclair, and Clifton. If you’re a few minutes over the border, the same pricing and the same 90-Day Done Right Promise applies. No trip charge inside the county.
Serving Little Falls, NJ - Our Local Coverage Area
We’re based in the Little Falls area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Little Falls
Floodwater saturates the soil around your gate posts, the ground softens, and the post shifts out of plumb. Then silt packs into the hinge knuckles and dries hard. The gate sags at the latch because the post has moved, not because the gate panel failed. We reset the post in a deeper concrete base and clean or replace the hinges. Call (877) 610-2993 and we’ll give you a price after looking at the post.
If the rust has eaten through more than about a third of the post’s diameter, welding in a patch buys you a year maybe two. If the bottom of the post is gone where it enters the concrete, replacement is the cheaper answer because that’s where the load sits. We’ll tell you which one applies to your gate before quoting anything.
No. A gate operator without UL 325 entrapment protection, photo-eyes, or edge sensors can close on a child, a pet, or a car. That’s a safety issue, not a convenience issue. If your operator can accept retrofitted sensors, we can install them. If the control board predates the safety standard, we’ll tell you to replace the operator. This is one repair Hal won’t patch up and walk away from.
Floodwater leaves silt under the gate track and into the rollers. The motor is running against the obstruction. The fix is usually clearing the track, replacing sealed roller bearings, and checking the limit switches. Sliding gate repair after a Passaic event runs $180-$400 on average in Little Falls, assuming the motor wasn’t submerged.
Usually yes. The hinges wear out before the gate panel does. If the posts are still solid in their footings, we replace the hinges, realign the gate, and it swings correctly again. If the post heaves or the weld points are too far gone, then replacement becomes the cheaper long-term answer. Call (877) 610-2993 and we’ll come look at it free. Estimates are free.
Most Little Falls repairs are scheduled within 24 to 48 hours. If a gate is stuck open and the property is unsecured, tell us when you call and we’ll treat it as an emergency. A live person answers the phone around the clock.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Little Falls and Passaic County with gate repair, welding, and operator service since 2001.