Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Laurel
Gate repair in Laurel, MD usually comes down to two things: the post rotted, or the hinges seized. Both are common in the 34272 ZIP, where salt-laden air off the Gulf sits heavy on uncoated steel and older swing gates take the brunt. We’re Gatewood Fence & Gate, owner-operated since 2001. A live person answers when you call, any hour. We fix gates in Laurel the right way: on site, welded and re-hung at your property, not hauled to a shop. If your gate won’t open, sags, or grinds against the ground, call (877) 610-2993. Hal Gatewood’s name is on the shop, and we’ll give you a written price before any work starts.
Why Gatewood Fence & Gate Is Laurel’s Preferred Gate Repair Company
We’re not a faceless national outfit. We’re a local owner-operated company that repairs gates in Laurel, MD, and we answer the phone ourselves. Around the clock. If you call at midnight because your gate is stuck open and your horses are looking at the road, you’ll get a person, not a voicemail. Hal Gatewood has been repairing gates since 2001, and the same hands that quote the job are the hands that do the job.
Laurel customers know us because we show up when we say we will, and we leave your gate working. Not sort of working. Working. Our Gate Repair team carries the parts and welding gear on the truck, so there’s no three-day wait for a hinge bracket to show up from somewhere else. We serve Laurel and the surrounding communities regularly enough to know the roads off Laurel Road, the ranch parcels, and the older 1970s-1990s gate installs that need a particular kind of attention.
Every job gets our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. That’s the whole promise. No fine print, no “up to” language.
Our Gate Repair Services in Laurel
Hinge & Post Repair
This is the repair we do most often in Laurel. A gate sags in the hinge post, not in the middle, and that’s where we start. On older properties along the Laurel Road corridor, the original mild-steel hinge posts seize from salt spray and standing water. Owners often don’t call until the gate won’t move at all. We dig out the old footing, reset and re-plumb the post, and put in corrosion-resistant hinges that actually belong in this climate. Fix the panel without the post and you’ll fix it twice.
Weld & Rust Repair
Laurel’s humid, salt-laden air accelerates pitting on steel gate frames at a rate most inland counties never see. Hairline cracks at weld points, rust bloom around hinges, bottom rails gone soft. We weld on site, in your driveway, and we do it properly. Cut out the bad section, replace it with matching steel, grind it clean, treat it, and paint it so it doesn’t rust through again next hurricane season. A welded repair done by someone who knows marine-adjacent corrosion holds. A patch job doesn’t.
Gate Realignment
A gate that drags, sticks, or won’t latch clean is usually a realignment problem, not a replacement problem. On Laurel’s larger-lot parcels, gates carry a lot of weight across a long swing. Years of settling and storm winds knock the geometry out. We re-hang the leaf, adjust the hinges, and set the latch so it closes with a solid click instead of a fight. If the operator is fighting the gate, realignment fixes that too, and the motor stops burning itself out.
Electric Gate Repair
Laurel has a good mix of manual gates and basic electric openers. When an opener fails, it’s usually the control board, the photocells, or a limit switch, not the whole operator. We service three major brands on a regular basis: FAAC, BFT, and Linear. If the board is obsolete, we’ll tell you straight whether it can be swapped for a current part or whether the operator has hit the end of its service life. You’ll get an honest answer before you spend a dollar.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Laurel
We’re certified to work on nine major gate brands, and on Laurel jobs we most often see FAAC, BFT, Linear, and Viking operators. These are solid, serviceable machines when the control boards and safety edges are maintained. We keep common replacement boards, remote receivers, and photocells for these brands stocked locally, so a service call doesn’t turn into a two-week wait. If your opener is trying to close on its own or refuses to open, call (877) 610-2993. We’ll diagnose it properly and tell you what it needs, not what makes a bigger invoice.
Common Gate Repair Problems We See in Laurel Homes
- Seized mild-steel hinges. Original uncoated hinges on 1980s and 1990s gates seize after a season of salt air and standing water. By the time owners call, the gate is completely immovable and the post usually needs re-plumbing.
- Rusted bottom rails and weld points. Standing water at the base of tubular-steel gates rots the steel from inside. We regularly cut out soft sections along the bottom rail and weld in new steel on Laurel properties.
- Sagging gates from worn or undersized posts. Older gates were often hung on posts too light for the leaf’s weight. After 20-plus years, the post leans, the gate drags, and the latch no longer aligns.
- Obsolete control boards on older operators. Many Laurel gates still run original operator hardware. When a board fails, we check compatibility first. Some boards can be replaced with current equivalents; others mean the operator has simply reached the end.
Pricing for Gate Repair in Laurel, MD
You deserve honest numbers before you decide. For Laurel gate repairs, here’s what you should expect to pay. Hinge replacement with a single new hinge and post reset typically runs $220 to $380. Full hinge post replacement, including cutting out the old post, new footing, and re-hanging, runs $450 to $800 depending on post size and soil conditions. Weld and rust repair on a tubular-steel frame runs $180 to $420 per section. Gate realignment runs $150 to $300. Control board replacement on a FAAC, BFT, or Linear operator runs $350 to $650 with programming and safety check included. Every price is quoted and agreed in writing before any work starts. If you already have a written estimate from another company, bring it to us. We’ll give you a free second opinion, and if the other shop missed something or oversold you, we’ll tell you. We also knock $40 off any repair over $200, and there’s no trip charge inside the county. Seniors and veterans always get 10% off, permanently. Call (877) 610-2993 for an exact quote, and that estimate is free.
We Also Serve Cities Near Laurel
We work up and down the corridors around Laurel, so if you’re in Maryland City, Savage, South Laurel, or Fort George G Mead Junction, we’re already in your area on a regular basis. The same owner-operated service, the same 90-Day Done Right Promise, and the same live person on the phone. If you’re on the edge of Laurel or just over the line, call us. Chances are we’ve fixed a gate on your road already.
Serving Laurel, MD - Our Local Coverage Area
We’re based in the Laurel area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Laurel
Laurel sits just a few miles inland from the Gulf of Mexico, so the air carries enough salt to oxidize uncoated steel much faster than inland counties experience. Original mild-steel hinges from the 1970s through the 1990s are the worst offenders. After one hurricane season of salt spray and standing water at the base of the hinge, the metal rusts and fuses. Annual cleaning and lubrication of your gate hinges is not optional here. If your gate is already frozen, hinge replacement and post re-plumbing is the normal fix. Call (877) 610-2993 and we’ll come take a look. Estimates are free.
Almost always it’s the post, not the panel. Mild-steel gate panels don’t bend over time unless a vehicle hit them. What happens on older Laurel gates is the hinge post leans or rots at the footing, and that changes the geometry of the whole leaf. We check the post with a level first. If the post is sound, we re-align the hinges. If the post is compromised, we cut it out, reset the footing, and re-hang the gate. Replacing the panel without fixing the post means you’ll replace it again in two years. For an honest assessment, call (877) 610-2993.
Not always. Many older Linear, BFT, and FAAC boards have current production replacement boards that plug into the same wiring harness, and we stock those locally. If your operator still closes smoothly and the photocell safety is functional, a board swap can keep it running for years more. When an operator’s gearbox is worn, the motor bearings are noisy, or the safety edges are gone, replacement is often the cheaper answer. We’ll tell you which situation you’re in, with a written price for either path. Call (877) 610-2993 for a straight answer and a free estimate.
Yes. We do this regularly on the larger-lot parcels off Laurel Road. If there’s no AC power at the gate, we can install a solar-compatible operator with a battery bank, sized to your gate’s weight and swing. Your 1990s pipe gate isn’t the problem; the operator just has to be matched to the load. We measure, spec, and install the whole system. The work is priced and scheduled up front, with a free measure and written quote before anything is ordered. Call (877) 610-2993 to schedule that measure.
Usually, yes. We brace the gate leaf, cut out the old post, dig out the rotted footing, pour a new concrete base, and set a new post with proper gravel drainage at the bottom. If the gate panel itself is still straight, we re-hang it on the new post, re-set the hinges, and adjust the latch. The gate stays on site the whole time. The old footings on Laurel’s older gates rarely have gravel drainage, so they sit in water and the post rusts below ground. We fix that properly. Call (877) 610-2993 and we’ll give you a written price before we start.
Your gate is not just a convenience. It’s the thing keeping your property closed, your animals in, and your driveway yours. When it fails, you need someone who shows up and fixes it. We’ve been doing that since 2001. Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate on any gate repair in Laurel, MD. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Laurel since 2001.