Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Landover
Gate repair in Landover, MD usually runs between $180 and $1,400 depending on whether you’re dealing with a corroded residential hinge post on a 1950s rancher or a high-cycle commercial slide gate operator near the Beltway. That’s the honest spread for this ZIP code, because 20784 covers both worlds: brick cape cods on shared driveways and heavy warehouse entrances off Landover Road. If your gate won’t open, sags at the hinge, or reverses when it shouldn’t, call (877) 610-2993 and a live person answers. That person works for Hal Gatewood, and if it’s an emergency, we’ll get a truck to your property in Landover the same day.
Key Takeaways
- Most Landover gate repairs cost $180-$1,400, quoted and agreed before we touch a wrench.
- We weld on site in your driveway. We don’t haul your gate off somewhere.
- Commercial slide gates around Northwest Stadium run on a different duty cycle than residential gates, and we stock parts for both.
- Every job carries the 90-Day Done Right Promise in writing.
- No trip charge inside Prince George’s County. $40 off any repair over $200.
Why Gatewood Fence & Gate Is Landover’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and the shop’s address and license number are published for anyone to check. That’s not a marketing line. It means if we weld a hinge bracket on your Landover home and it fails, you drive to the shop and look Hal in the eye. The name is on the building, and the building is down the road. That’s the oldest accountability there is.
Landover homeowners call us because the person who shows up is the same person who quoted the price, and that price does not change at the door. We’ve repaired gates in every corner of 20784, from the residential blocks east of Landover Road to the warehouse corridor behind Northwest Stadium. A gate sags in the hinge post, not in the middle, and that’s where we start. Fix the panel without the post and you’ll fix it twice. We’d rather fix it once.
Schedule a repair and we’re there within a day in most cases, unless it’s a Commanders home game weekend, more on that below. A live person answers the phone at (877) 610-2993 around the clock, not a voicemail and not a chatbot. Our Gate Repair team brings parts for LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, Ghost Controls, and Mighty Mule, so we typically finish in one visit.
Our Gate Repair Services in Landover
Hinge & Post Repair
This is the bread and butter of residential Gate Repair in Landover. The original tubular steel and chain-link driveway gates on postwar brick ranchers in 20784 were set in concrete footings poured between the late 1940s and the 1970s. Decades of mid-Atlantic humidity and freeze-thaw cycles have cracked those footings and corroded the hinge hardware. We reset the post, pour new concrete, and weld the hinges back square. Not a patch job, a repair that holds.
Gate Realignment
On tight shared driveways in Landover, a gate that’s drifted an inch out of square drags on the ground and jams every time someone presses the opener. Realignment means resetting the geometry: hinge post plumb, gate panel level, latch post aligned. You’d be surprised how many Landover gates were never hung right in the first place. We fix the panel and the post together, so you don’t get another sag in six months.
Electric Gate Repair
Electric gate repair in Landover splits into two worlds. Residential openers on those old cape cods and ranchers are usually mid-duty residential boards, and the failure is typically the control board, the limit switch, or a capacitor killed by a power surge off the grid. Commercial electric gates along the Beltway corridor run FAAC and BFT hydraulic operators that see hundreds of cycles a day. We diagnose the actual fault, replace the failed part, and leave you with a gate that cycles the way it should.
Automatic Gate Repair
Automatic gate systems in Landover live outdoors in humid summers and hard winter freezes. That kills photocells, strips rack and pinion teeth on slide gates, and confuses limit switches. We service the operator, the safety edges, the loop detectors, and the mechanical hardware as one system, because that’s what they are. A gate that reverses on its own is telling you where it’s failing. We listen.
Weld & Rust Repair
Rust is a fact of life in Landover’s humid subtropical climate. No coastal breeze to speak of, just persistent summer moisture sitting on iron and steel. We cut out what’s rotted, weld in new material on site, and treat the repair so it doesn’t turn brown again in a season. On-site welding means your gate never leaves your property.
Lock Repair
Gate locks on Landover properties range from simple slide bolts on chain-link to maglocks and electric strikes tied into access control at commercial sites. We repair or replace the lock, match the keying, and make sure it actually secures the opening. A gate that doesn’t lock is an open invitation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Landover
We repair more FAAC and BFT hydraulic operators in Landover’s warehouse corridor than any other brand, because that’s what the commercial properties out there run. Linear and LiftMaster show up constantly on residential swing gates in the neighborhoods south of the Beltway. We keep common parts for these brands on the truck, which means we’re not waiting three days on a board while your gate sits open. Hal and his crew are certified to service nine major brands, and we don’t play favorites: if it turns a gate, we know how to fix it.
Common Gate Repair Problems We See in Landover Homes
- Corroded hinge posts on 1950s chain-link gates. The concrete footings poured in the Truman and Eisenhower years are done. The post leans, the gate sags, and it binds on a shared driveway that two neighbors need every morning.
- Rack and pinion wear on commercial slide gates. Slide gates along Landover Road cycle hundreds of times a day for truck traffic. When the hinge post shifts even a quarter inch, the rack strips teeth and the operator starts shearing. Winter freeze-thaw makes it worse.
- Game-day scheduling shutdowns near Northwest Stadium. On Commanders home game Sundays, Landover Road and the Beltway interchange gridlock for hours. We black out those windows entirely and schedule commercial service calls mid-week during the fall. A stuck-open or stuck-closed gate on a game day isn’t something any Landover warehouse wants, and we plan around it.
- Photocell failures from humidity and road salt. Safety eyes on automatic gates around 20784 get fogged, corroded, and knocked out of alignment. The gate either won’t close or reverses unpredictably.
Pricing for Gate Repair in Landover, MD
Here are the straight numbers for Landover. A residential hinge and post repair on a steel driveway gate typically runs $280-$620. Gate realignment runs $190-$410 on most Landover homes. Electric gate repair starts around $180 for a failed limit switch or photocell and climbs to $700-$1,400 for a commercial slide gate operator rebuild or a new control board on a FAAC or BFT system. Every price is quoted up front, in writing, and agreed before we start. The price you get on the phone is the price on the invoice. No trip charge inside Prince George’s County, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
| Repair Type | Typical Landover Range |
|---|---|
| Hinge & post repair (residential) | $280-$620 |
| Gate realignment | $190-$410 |
| Electric gate diagnostic & minor part | $180-$350 |
| Commercial slide operator rebuild | $700-$1,400 |
| Weld & rust repair (per section) | $150-$450 |
Why Landover’s Commercial Gates Run on a Different Clock
If you work at or manage a warehouse property off Landover Road, you already know this: your gate is not the ornamental iron you see in College Park. Landover’s 20784 ZIP sits beside Northwest Stadium, and the corridor around it is dense with logistics warehouses and distribution centers moving freight along the Capital Beltway. Those slide gates run hundreds of open-close cycles every day, and they fail differently than anything residential. Rack and pinion assemblies wear out. Operator limit switches drift. Loop detectors stop seeing trucks, so the gate sits open and your security goes with it.
We worked a slide gate at a distribution center off Landover Road where a DoorKing operator was shearing rack teeth because the hinge post had shifted in its degraded post footing. Something had to give every time the gate opened, and what gave was the rack. We reset the post with new concrete, realigned the rack, and replaced the worn safety photocell so the truck entrance stayed open during the repair. No downtime for inbound freight. That’s the kind of repair work this ZIP code demands, and it’s the kind we’ve been doing for decades.
Then there’s the fall. On Washington Commanders home game days, the streets around Northwest Stadium turn into a parking lot for hours before and after kickoff. Landover Road and the Beltway interchange back up completely. Any gate tech who schedules a commercial call on a Sunday afternoon in September either doesn’t know Landover or doesn’t care. We black out game-day windows and schedule mid-week service during football season. If your warehouse gate fails on a Thursday and doesn’t get fixed, you’re facing a weekend with trucks stuck outside the perimeter. That’s why we answer the phone at (877) 610-2993 on the first ring, even at 2 a.m.
We Also Serve Cities Near Landover
While this page is for Landover, our repair crew also covers the surrounding area regularly: East Riverdale, College Park, Bladensburg, and Cheverly. If you’re just over the line in one of those neighborhoods, the same pricing and the same 90-Day Done Right Promise apply. Call (877) 610-2993 and we’ll give you the same straight answer.
Serving Landover, MD - Our Local Coverage Area
We’re based in the Landover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Landover
The hinge post is the weak link because those original posts were set in concrete footings poured 60 to 75 years ago, and Landover’s humid summers and freeze-thaw winters have cracked that concrete and corroded the steel inside it. As the post shifts, the gate drops at the latch end. The fix is resetting the post in new concrete and welding the hinge hardware back square, which we do on site in Landover. Call (877) 610-2993 and we’ll quote the job before we start.
Yes. Slide gates are the right answer for many Landover shared driveways where a swing gate would hit the fence line or block the neighbor’s car. The job requires installing a rail system, rack, and operator, plus reworking the post layout. We handle the whole conversion in Landover, including the concrete work and the power run. A free measure and written price are yours for a phone call.
We do not schedule service calls within the stadium corridor on Commanders home game days, because Landover Road and the Beltway interchange gridlock for hours and no technician can reach the site. Emergency calls near the stadium are scheduled for mid-week during the fall season. If you have a commercial gate down on a game weekend, call (877) 610-2993 and we’ll get you on the next available mid-week slot, or earlier if the gate is a true security issue.
Automatic gates at Landover commercial properties must have functioning entrapment protection: safety photocells or contact edges that stop and reverse the gate when an obstruction is detected. UL 325 sets the federal standard, and Prince George’s County inspections enforce it. We install and test safety edges and photo eyes on every automatic gate we service in Landover, and we’ll tell you straight if your gate doesn’t meet code.
Loop detectors buried in the pavement sense vehicle weight and tell the slide gate to stay open while a truck is passing. When a loop fails, the gate starts closing on trailers, and that’s how you get damaged racks, bent gate panels, and an operator that burns out prematurely. We install and tune loop detectors at Landover warehouse sites as part of every slide gate repair. Call (877) 610-2993 for a free estimate on loop replacement or slide gate service.
Get Your Landover Gate Fixed Today
Show me the gate closing on its own and I’ll show you where it’s failing. That might be a corroded hinge post on a 1950s rancher, a stripped rack on a warehouse slide gate, or a photocell that’s seen one too many humid summers. Whatever it is, Hal Gatewood or one of his crew will be there to fix it, and the 90-Day Done Right Promise comes in writing on every job. Call (877) 610-2993 now for a free estimate. You’ll talk to a person, get a straight number, and we’ll be out to Landover fast.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Landover since 2001.