Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hull
A gate that won’t open or won’t stay shut on a salt-sprayed Hull peninsula is a different animal than an inland gate repair. Hinges seize, posts rot at the base, and operator boards corrode from humidity you can’t see until the keypad goes dead. We fix it the right way, the first time. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood’s name is on every job. If your gate is sagging, jammed, or dead, call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Hull’s Preferred Gate Repair Company
We’re not a faceless dispatch operation. Hal Gatewood runs the shop, his address is published, and the person who shows up to your Hull driveway answers to him directly. Around Nantasket Beach, Atlantic Hill, and Allerton, homeowners have learned the difference between a company that swaps a part and disappears and one that welds the hinge in place and hands you a written 90-Day Done Right Promise. That promise is simple: if it’s not done right, we make it right. No runaround, no fine print.
Salt air punishes gate hardware here faster than almost anywhere in the Boston metro. We service nine major brands including LiftMaster, Linear, Viking, and DoorKing, and we stock the stainless fasteners and powder-coated hinges Hull properties actually need. Every call to (877) 610-2993 is answered by a live person, 24/7. When you call about a seized gate on Manomet Avenue or a sagging driveway gate off Nantasket Road, you’re talking to someone who knows exactly what that salt environment does to steel.
Our Gate Repair Services in Hull
This is a coastal town, and the repairs we do most reflect it. Here’s what Hull homeowners call us for, week in and week out.
Electric Gate Repair
Electric gate operators in Hull fail differently than inland. Salt-laden humidity creeps into the control board enclosure, corroding terminals and causing intermittent keypad failures, safety photocell faults, and dead motors. We diagnose the full circuit, not just the symptom. If your LiftMaster or Viking operator has stopped responding after a nor’easter, we’ll test the board, the loop detector, the battery backup, and the wiring harness before recommending any replacement. No part gets swapped unless it’s actually failed.
Automatic Gate Repair
Automatic gates on the peninsula take abuse from wind off Massachusetts Bay and Hull Bay on three sides. When an opener struggles to move a gate, the cause is usually not the motor. It’s the hinge pin corroded nearly solid, the post shifted by frost heave, or the track loaded with sand. We’ve seen automatic gates a few years old in Hull with hinge hardware that would last fifteen years in Weymouth. Our repair starts at the physical gate, not the control box, because that’s where coastal failures begin.
Hinge & Post Repair
Around Hull, galvanized hinges and painted steel posts set in sandy, salt-saturated soil rot at the base years ahead of schedule. A gate sags in the hinge post, not in the middle, which is exactly where we start. We dig out the failed footing, reset the post in new concrete with stainless anchor bolts, and re-hang the gate so it swings true. When the post is too far gone, we replace it with a treated or powder-coated option built for marine exposure. This is the most common repair we do from late February through April, when frost heave has done its winter work.
Gate Realignment
Frost heave in Hull’s sandy coastal soil shifts gate posts out of alignment every winter. You’ll notice the gate dragging on the latch side, the gap widening at the top, or the openers straining. Realignment means more than nudging the panel. We check post plumb, hinge wear, and latch alignment as one system. After a realignment, the gate should close square every time, with the safety photocells aligned so the automatic opener works without false reversals.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hull
We’re certified to repair and service nine major gate brands, and in Hull we see a lot of Linear, Viking, Ghost Controls, and DoorKing operators on Nantasket Beach cottages and year-round homes near Fort Revere. We keep common boards, remotes, photocells, and stainless hinge hardware on the truck so most Hull repairs finish in one visit. When a part needs to be ordered, we tell you the real timeline before we start, not after.
Common Gate Repair Problems We See in Hull Homes
These are the failures that repeat across the peninsula.
- Hinge pins rusted nearly solid. Continuous salt spray from Boston Harbor, Hull Bay, and Massachusetts Bay seizes swing gate hinges within 3-5 years. A gate that won’t budge usually means the hinge pin is the culprit, and forcing it tears the post loose.
- Steel posts rotted at the base. Old summer cottages converted to year-round homes often have untreated steel posts set directly in sand. Salt water sits at the base, eats through the metal, and the gate lists hard toward the latch. We see this constantly on side streets off Nantasket Avenue and George Washington Boulevard.
- Operator control boards corroded from salt humidity. The motor may be fine, but the board inside the chassis is green with corrosion, causing intermittent keypad entry, false photocell triggers, and random stops mid-cycle.
- Welds cracking at stress points. Ornamental iron gates near Nantasket Beach flex constantly in coastal wind, and weld points at the hinge stiles crack over time. Where a bolt-on bracket would snap again, an on-site weld restores the original strength. We weld on site, in your driveway, rather than hauling the gate to a shop.
Pricing for Gate Repair in Hull, MA
Here’s what Hull homeowners can expect. Hinge and post repair typically runs $225-$425 per post, including the concrete footing reset and stainless hardware. Gate realignment alone, without a post reset, is usually $150-$275. Weld and rust repair on an ornamental gate runs $185-$400 depending on how many stress points need reinforcing. Electric gate operator repair lands between $160-$380 for control board replacement, safety photocell work, or loop detector diagnosis, and full operator replacement with installation typically runs $850-$1,900 depending on the model and gate weight. Every price is quoted and agreed in writing before any work starts. We don’t change the number at the door. You’ll also get $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Hull
If you’re in Hull or just over the town line, our Gate Repair crew covers the whole South Shore. We regularly work in Hingham, Cohasset, North Scituate, and Weymouth, and the same 90-Day Done Right Promise and live-answer phone apply everywhere we go.
Serving Hull, MA - Our Local Coverage Area
We’re based in the Hull area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hull
Hull sits on a narrow peninsula with Boston Harbor, Hull Bay, and Massachusetts Bay on three sides, so wind-driven salt spray coats your gate hardware every day of the year, not just during storms. Galvanized hinges that last twenty years in Brockton fail in three to five years here. The fix is stainless or powder-coated aluminum hardware, which we stock for Hull jobs. Call (877) 610-2993 and we’ll tell you honestly whether your existing hardware can be saved or needs a marine-grade upgrade.
Bracing a rotted post buys you a season at most, and on a salt-soaked Hull property, usually less. The rot is at the base where salt water pools against the wood, and a brace does nothing for that. We remove the old post, set a new treated or composite post in concrete with proper drainage, and re-hang the gate so the original panel stays in service. It’s a permanent fix, not a prop. Get a free estimate at (877) 610-2993.
Yes. Homes on the ocean side of Nantasket Beach and along Atlantic Hill get far more direct salt spray than even a few blocks inland, and standard hardware store hinges and brackets will fail quickly. We recommend stainless steel pins, powder-coated aluminum hinges, and stainless fasteners throughout. We keep these in stock and install them on nearly every ocean-side Hull repair. Call (877) 610-2993 to have us look at what you’ve got.
Usually not. What we find in Hull after a nor’easter is salt-laden moisture inside the control board enclosure, corroded terminals, or a safety photocell knocked out of alignment. The motor itself is often fine. We test the full system before recommending any replacement, so you don’t pay for a motor you don’t need. Call (877) 610-2993 and we’ll diagnose it properly.
Ask where they started. Straightening the panel without addressing the hinge post is a temporary fix. A proper repair resets or replaces the post, installs new hinges, and then realigns the panel. At Gatewood Fence & Gate, the 90-Day Done Right Promise covers exactly this: if the sag comes back, so do we. Call (877) 610-2993 for a quote before you pay someone to fix it twice.
Call Gatewood Fence & Gate in Hull Today
If your gate is sagging, seized, or the opener won’t respond, don’t wait for the salt to finish the job. We’ve repaired hundreds of Hull gates, from Nantasket Beach cottages to year-round homes near Fort Revere and Allerton, and we know what lasts on this peninsula. Every job carries a written 90-Day Done Right Promise. The price is agreed before we start. And a live person answers when you call. Reach Hal Gatewood’s crew at (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hull since 2001.