Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Highview
Gate repair in Highview usually comes down to one of three things: a post that has heaved out of plumb, a hinge that has corroded through, or an operator board that gave up years ago and nobody noticed until the gate stopped moving. Most of the gates we work on in the 40228 ZIP were hung in the 1960s through 1980s, and the clay under them has been working against the posts every winter since. We fix the gate where it stands, weld on site when it needs welding, and stand behind the work for 90 days in writing. If your gate is dragging the ground, wedged shut, or refusing to open, call (877) 610-2993 and a live person picks up.
Why Gatewood Fence & Gate Is Highview’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That matters in a place like Highview, where a lot of the work we get is on gates that have been neglected for thirty years and then patched by somebody who was in and out in an afternoon. We live with the same clay soil you do. We know what a Jefferson County freeze-thaw cycle does to a shallow footing, and we do not quote a job in Highview without walking the gate line and looking at how the posts sit in the ground.
The difference between us and the companies that send a rotating cast of subcontractors is simple: the person who answers your call knows what a post heave looks like on a Fegenbush Lane ranch. We publish our address. Our license number is on file and easy to check. And if a repair is not done right, the 90-Day Done Right Promise brings Hal back to make it right, no runaround.
Our Gate Repair Services in Highview
Electric Gate Repair
Older electric gates in Highview often fail because the control board is obsolete and no longer talks to anything made in the last decade. We service LiftMaster, FAAC, BFT, and Linear operators, and we will tell you honestly if a retrofit is cheaper than nursing a board that is already on borrowed time. Most electric gate repairs in Highview run between $180 and $420 depending on whether the issue is a board, a limit switch, a receiver, or wiring that has gone bad underground.
Automatic Gate Repair
Automatic gates on Highview’s older homes were frequently retrofitted onto chain-link swing gates that were never designed for the weight or the repeated movement. The operator gets blamed, but the real problem is usually the hinge post flexing or the frame twisting. We check the gate’s swing geometry before we condemn the motor. That saves you money and keeps the gate working through the season instead of failing again in six weeks.
Hinge & Post Repair
This is the repair we do most often in Highview, and it is the one other companies quote fastest just to get a signature. A gate sags in the hinge post, not in the middle, and that is where we start. When the clay heaves a post upward through a winter, the gate leaf drops at the latch end and starts dragging. We dig, reset the post in a proper concrete footing, and replace the hinges if they have corroded. Most hinge and post repairs in Highview run between $260 and $600, depending on whether one post or both need to be reset and how deep the old footing went, if it existed at all.
Gate Realignment
After an ice storm or a few years of freeze-thaw, even a gate with solid posts can bind at the latch or hang crooked. Gate realignment in Highview typically costs $120 to $280. We adjust the hinge tension, square the frame, and level the leaf so it swings smoothly without dragging. If the post has moved, realignment alone will not hold, and we will show you exactly why before quoting a fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highview
We service and stock parts for the operators we see most often on Highview’s gates: FAAC, BFT, Linear, and Viking, alongside LiftMaster and others. Nobody in Highview wants to wait a week for a control board that a supplier in Louisville could have had on the truck in a day. We keep common boards, remotes, and safety edges on hand, which means we can often repair an operator the same day we diagnose it. We would rather fix the board than sell you an operator you do not need.
Common Gate Repair Problems We See in Highview Homes
- Post heave from Jefferson County clay. Each winter, moisture swells the clay under the posts, lifting them incrementally upward as the ground freezes and thaws. By March, the gate is dragging the ground even though it swung fine in October.
- Corroded hinges and bent frames on aging chain-link swing gates. Many of these gates still have their original 1960s or 1970s steel hinges. Ice-storm loads bend the frames and snap the latch hardware, and once a hinge corrodes through, the whole gate leaf pulls downward.
- Legacy operators with obsolete control boards. Gates hung before modern safety requirements often have no photocell or edge-sensor entrapment protection. The control board may be the only thing keeping the gate from closing on a car, a pet, or a person.
- Shallow or missing concrete footings. Highview’s original gate posts were often set directly in dirt or with a bag of quick-set mix around the base. Once the clay heaves, there is nothing anchoring the post, and the gate’s swing geometry falls apart.
Pricing for Gate Repair in Highview, KY
Here is what gate repair honestly costs in Highview. A hinge and post reset runs $260 to $600. Gate realignment is $120 to $280. Electric gate repair runs $180 to $420, and a full operator retrofit or replacement on an automatic gate typically lands between $600 and $1,300 depending on the operator and safety equipment required. The price is quoted and agreed before any work starts, in writing. We do not show up and add a line item you never saw. We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote, estimates are free.
We Also Serve Cities Near Highview
Highview sits close to a handful of communities that face the same clay soil and the same aging gate stock. We regularly run calls to Fern Creek, Buechel, Newburg, and Okolona. If you are in one of those areas and your gate has stopped cooperating, you are still getting the same crew, the same pricing, and the same written 90-Day Done Right Promise. Read more about our Gate Repair services, or see how we help homeowners across Highview with the specific repair patterns this ZIP code throws at us each spring.
Serving Highview, KY - Our Local Coverage Area
We’re based in the Highview area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Highview
The gate is dragging because the hinge post has heaved upward through Jefferson County’s expansive clay soil during the winter freeze-thaw cycle, not because the gate itself broke. Each freeze lifts the post a fraction of an inch, and by March the latch end of the gate leaf is sitting low enough to scrape. This is a seasonal failure pattern tied directly to local soil, and the fix is to reset the post in a proper concrete footing, not to grind down the gate. Call (877) 610-2993 and we will come look at the post line before it gets worse.
Yes, in most cases, an original chain-link swing gate in Highview can be retrofitted with a modern automatic operator, but the gate geometry and the hinge posts have to be squared up first. If the posts are heaving or the hinges are corroded, bolting a new operator onto that setup will destroy the operator inside a season. We tell you whether your gate is a retrofit candidate or whether replacing the post and realigning the leaf first gives you the same capability for less money. Call us for a free walkthrough and written quote.
If your gate has no photocell or edge-sensor entrapment protection and the control board has not been touched in 15 or 20 years, it is obsolete and it is a safety hazard. Modern operators reverse when a vehicle or person interrupts the sensor beam. An old board with no sensors relies on force alone, and on Highview’s heavier chain-link gates, that force will win against whatever is in the way. We will inspect the board, identify the missing safety components, and tell you straight whether retrofitting is cheaper than replacing the operator.
Because the original posts were set with shallow or nonexistent concrete footings, and the Jefferson County clay has been lifting them a little more every year. The gate panel, if it is galvanized steel, can last fifty years. The post in the ground takes every freeze-thaw cycle, every rain, and every lateral load from the swinging gate. Fix the panel without the post and you will fix it twice. That is why we start with the post.
After an ice storm, we reliably see bent frames, snapped frozen latches, and hinge posts that have shifted out of plumb from the ice load combined with the frozen ground’s refusal to give. The gate usually still hangs, but it will not latch or it drags diagonally. The repair pattern is realign the frame, weld any torn sections, reset the post if it moved, and replace the latch hardware. This is the kind of work we do on site, in your driveway, without hauling the gate off to a shop. Call (877) 610-2993 and we will get you on the schedule.
What Makes Gate Repair Different in Highview
Highview’s 40228 ZIP sits on Jefferson County’s expansive clay soil, and that single fact explains more about our repair calls than any brand of gate ever will. Winter moisture swells the clay, which pushes gate posts upward incrementally through each freeze cycle. By March and April, the ground has thawed and the posts have settled into a new, higher position, leaving gates dragging, wedged shut, or swinging wide. It happens every spring. It is not a gate-quality problem. It is geology. If you have lived in Highview for a decade, you have probably watched it happen to your fence line or your neighbor’s.
We reset a sagging chain-link swing gate on a 1970s ranch in the Fegenbush Lane area after the original hinge post heaved out of plumb. The 40-year-old post had no concrete footing beneath it, and the corroded steel hinges had pulled the frame downward until the latch end was dragging a groove in the grass. We poured a new 36-inch concrete footing, replaced the hinge post and hardware, and corrected the gate leaf’s pitch so it swings level again. No new panel needed. The gate was structurally fine. The post was the problem. That is how most Highview gate repairs actually go.
Show me a gate closing on its own and I will show you where it is failing. In Highview, it is usually the post. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Call Gatewood Fence & Gate for Gate Repair in Highview
If your gate has stopped cooperating, call (877) 610-2993 now and talk to a live person. We quote the repair upfront, we do the work on site, and we give you the 90-Day Done Right Promise in writing before we leave. Whether it is a heaving post off Fegenbush Lane, a dead operator on a split-level’s driveway gate, or a bent frame from the last ice storm, we will come look and tell you what is actually wrong. If you already have a written estimate from elsewhere, bring it in. A free second opinion beats paying for the wrong repair.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highview since founding the company in 2001.