Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Greenville
Gate repair in Greenville usually comes down to one thing: the ground under the posts. In this part of Greene County, the frost line runs deeper than 40 inches, and when that ground freezes and thaws through a Catskill winter, it shoves posts out of plumb and binds gates against their hinges. We see it every April when weekend homeowners open up seasonal properties and find a swing gate dragging on the gravel or an opener that won’t budge. If you’re standing in your driveway off Route 81 or County Route 26 right now looking at a gate that won’t open, call Hal at (877) 610-2993. He answers the phone himself, and he’ll give you a straight answer about what’s wrong and what it costs to fix.
This page is for homeowners in Greenville, NY who need a gate working again without hauling it to a welding shop two towns over. Our Gate Repair crews weld on site, reset posts at the proper depth, and service the brands you already own. We’re familiar with the long gravel driveways, the converted barn properties, and the seasonal-use pattern that makes gate failures here different from anywhere else in the Hudson Valley.
Key Takeaways
- Most Greenville gate failures trace back to frost-heaved posts, not the gate itself.
- Post footings on unheated Catskill driveways should sit 48 inches deep to stay stable.
- We stock parts for FAAC, BFT, Linear, Viking, LiftMaster, and Mighty Mule, and we weld on site.
- Solar gate openers on unoccupied winter driveways are a common spring failure point.
- Every repair carries a 90-Day Done Right Promise in writing. Upfront pricing, no trip charge inside the county.
Why Gatewood Fence & Gate Is Greenville’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is still on the door. That’s not a marketing line; it’s how accountability works when the person you call is the same person who shows up with a welding rig and a post-hole auger. Homeowners around Greenville have called us for years because we do something national outfits won’t: we fix the gate you have instead of selling you a replacement.
Reviews from Greenville and the surrounding towns mention the same thing over and over: somebody answered the phone, somebody showed up in the window they said, and the price on the estimate matched the invoice. Hal’s crew is background-checked, uniformed, and trained on nine major gate brands, so they’re not learning on your gate. And the 90-Day Done Right Promise is stamped on every job in writing. If something isn’t holding up, one call brings Hal back. No runaround, no dispatch queue, no phone tree.
Our Gate Repair Services in Greenville
Hinge & Post Repair
This is the work we do most in Greenville, and it’s where the frost line matters most. A gate sags in the hinge post, not in the middle. When a post heaves even an inch and a half, the gate binds at the latch, the hinges groan, and eventually something bends or breaks. We dig out the old footing, reset the post at 48 inches, anchor it in concrete below the frost line, and weld or bolt the hinges back in true alignment. Fix the panel without the post and you’ll fix it twice. We fix it once.
Electric Gate Repair
Electric gates on Greenville acreages fail in patterns we’ve grown to expect. Loop detectors buried under gravel driveways get crushed by frost expansion, so the gate stops responding to vehicles. Control boards short out after months of condensation inside unheated boxes. Safety photocells drift out of alignment when posts shift. Our Gate Repair team traces the electrical path end to end, replaces only what’s failed, and re-tests the full open-close cycle before we leave.
Automatic Gate Repair
Automatic gate openers on weekend properties take a beating during the months nobody’s there. Ice intrudes into the rack and pinion, gearboxes seize, and operators burn out trying to move a frozen gate. We service FAAC, BFT, Linear, Viking, LiftMaster, Mighty Mule, and several other brands, and we stock the most common replacement parts for Greenville customers so you’re not waiting two weeks on a shipment. If your opener is dead after a winter away, call (877) 610-2993. We’ll tell you what happened and what it costs to put right.
Gate Realignment
Sometimes the gate itself is fine and the posts are fine, but the gate still drags or won’t latch. That’s a realignment job: adjusting hinges, shimming the post mounts, tuning the opener’s travel limits, and re-squaring the gate to the post. We do this on heavy farm gates, ornamental driveway gates, and sliding gates alike. On a 16-foot swing gate, half an inch of sag at the latch end means a world of difference in how the opener works.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greenville
We’re certified to service nine major gate opener and automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Greenville, the most common units we open up are FAAC and BFT operators on heavy farm and estate gates, plus Linear and Viking on older slide gates. We carry common boards, arms, transmitters, and photo eyes at the shop, and for less common parts we can usually have them in hand within two or three business days. If you already have a quote from another company and want a straight second opinion, bring it to us. A Gate Repair estimate review is free.
Common Gate Repair Problems We See in Greenville Homes
- Frost-heaved hinge posts. The ground around Greenville freezes deep and thaws unevenly. Posts set in shallow concrete shift up and out of plumb by spring, binding swing gates and pulling hinges out of square. The fix starts at the footing, not the gate panel.
- Seized openers on unoccupied driveways. Seasonal homes sit dark from November through March. Gearboxes fill with condensation and freeze. Motors draw high current against ice-locked racks. The opener burns out, and the owner finds it dead on the first spring visit.
- Solar gate opener failures. Solar setups work fine through summer, but short winter days and frozen batteries leave slide gates dead on arrival when nobody is there to clear snow off the panel or trickle-charge the battery. We see this constantly on the multi-acre lots outside the village center.
- Crushed loop detectors under gravel. Frost expansion in gravel driveways flexes and shears the loop wires buried under the surface. The gate stops seeing cars, opens at random, or won’t close. We test the loop, find the break, and splice or replace it properly.
Pricing for Gate Repair in Greenville, NY
A typical hinge and post reset in Greenville runs $400 to $750 depending on post size, gate weight, and how much concrete needs to come out. Electric gate troubleshooting and control board replacement generally lands between $250 and $600. A full opener replacement on a heavy farm gate, depending on brand and solar backup needs, typically runs $1,200 to $2,800 installed. Most repairs are completed in one visit. Every price is quoted and agreed before any work starts, so the number you hear on the phone or see on the written estimate is the number on the invoice. We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Greenville
If you’re looking for Gate Repair in Greenville or the surrounding area, we run crews to Pound Ridge, North Castle, Greenburgh, and Irvington as well. Same live person on the phone, same 90-Day Done Right Promise, same upfront pricing. If you’re anywhere in southern Greene County and your gate won’t open, call us before you call anyone else.
Serving Greenville, NY - Our Local Coverage Area
We’re based in the Greenville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Greenville
A gate post footing in Greenville should be at least 48 inches deep to sit below the frost line. The Catskill foothills elevation around Greenville produces frost penetration that regularly exceeds 40 inches, and a post set at the common 36-inch depth will heave within a few winters. We dig post holes to 48 inches, set the post in concrete, and backfill properly so the gate stays plumb through repeated freeze-thaw cycles. Call (877) 610-2993 if you suspect your posts are too shallow, and we’ll inspect them for free.
Yes, a solar gate opener can survive a Catskill winter, but only if it’s set up for it. Small trickle-charge panels and standard batteries fail when the days get short and temperatures drop into the teens. We spec cold-rated batteries, larger panels angled for winter sun, and low-temperature rated operators like the FAAC models we install on unmonitored driveways in Greenville. If your solar opener died over the winter, call (877) 610-2993 and we’ll tell you what to replace and what to keep.
Because the ground under the gate and the moisture inside the operator both changed while you were gone. Frost heave tilts the hinge post just enough to bind the gate, and condensation inside the operator housing freezes gears and corrodes contacts over a Catskill winter. The gate may work fine in August and be dead in April. We see it every spring off Route 81 and the back roads around Greenville. Call (877) 610-2993 and we’ll walk you through what you’re looking at before we even schedule a visit.
Yes. Any automated gate, farm or residential, needs working entrapment protection: safety photocells, reversing edges, and proper force settings. The code requirement isn’t about whether the gate is ornamental or utilitarian. It’s about preventing the gate from closing on a person, an animal, or a vehicle. We re-align and test photocells on every automatic gate repair in Greenville, and we’ll tell you honestly if your existing setup doesn’t meet current standards. Call (877) 610-2993 for a free assessment.
The first sign is usually a hairline gap between the post and the concrete around its base, or a gate that latches fine one week and drags the next. Sometimes you’ll see fresh rust scale at the weld joints where the post and hinge mount meet, and sometimes the gate will start opening or closing a few inches short of its normal travel. Show me the gate closing on its own and I’ll show you where it’s failing. If you see any of these signs on your Greenville gate, call (877) 610-2993 and we’ll send someone out to measure and diagnose before it gets worse.
Call Gatewood Fence & Gate for Gate Repair in Greenville
If your gate won’t open, sags on its hinges, or never worked right after last winter, call Hal at (877) 610-2993. You’ll get a live person on the phone, a straight answer about what’s likely wrong, and an honest price before any work begins. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Greenville and Greene County since 2001.