Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Glenville
Gate repair in Glenville usually means working on iron that’s been standing since Calvin Coolidge was in office. Most of the calls we take here aren’t for modern aluminum panels that snapped a hinge. They’re for 1920s wrought iron gates whose concrete piers have spalled, whose weld points have rusted through, and whose posts have been heaved out of plumb by a hundred Cleveland winters. We know that before we even park the truck. Hal Gatewood has been fixing gates since 2001, and when we roll into Glenville, we already know what we’re going to find: narrow side drives, shared rights of way, and ironwork that deserves to be repaired, not ripped out and replaced with something that’ll look wrong against brick. Call (877) 610-2993 and you’ll get a live person, day or night. Not a voicemail. Not a call center. A person who can tell you what a spalled footing means and why it matters before we even come look.
Why Gatewood Fence & Gate Is Glenville’s Preferred Gate Repair Company
Our Gate Repair team works Glenville differently than a company that sends a guy with a truck full of prefab panels and a drill. We start from the post. A gate sags in the hinge post, not in the middle, and that’s where we start. Glenville’s housing stock went up between 1910 and 1935, which means the ironwork was set in poured concrete piers that have now been through 85 to 110 freeze-thaw cycles. The concrete spalls, the post tilts, the gate drags. A national outfit will quote you a new aluminum gate and never look at the footing. We will tell you the footing is the repair, because it almost always is.
Every Glenville job comes with the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. Hal Gatewood’s name is on the shop and on every invoice. He’s not passing through. We’re locally owned and owner-operated, with a published address and license number anyone can look up. The person who answers your call at 3 a.m. is the same company that stands behind the work at 3 p.m. on a Tuesday. That’s the whole point.
Our Gate Repair Services in Glenville
Hinge & Post Repair
This is the most common call we get in Glenville, and it’s almost never just a hinge. The hinge post on a century-old iron gate is set in concrete that has spalled and cracked from frost heaving. The post leans, the hinges bind, and eventually the weld at the post base lets go. We repair the post, re-pour the footing when it’s gone too far to save, and re-hang the gate so it swings true. Fix the panel without the post and you’ll fix it twice.
Most hinge and post repairs in Glenville run $260 to $480, depending on whether the footing can be salvaged or has to be re-poured. We quote the price before any work starts. You agree to the number before our hands touch the gate.
Gate Realignment
Glenville’s clay-heavy soil and Lake Erie lake-effect moisture mean the ground moves. A gate that cleared the walkway fine in November is dragging by March. Frost heaving tilts the post footings, and suddenly the latch won’t reach, the gate rubs the concrete, and the motor strains. We re-plumb the posts, reset the gate, and adjust the hinges so it swings and latches properly. No new gate. No unnecessary parts. Just the gate you have, working the way it used to.
Realignment in Glenville typically runs $180 to $340. If the post footing has to be demolished and re-poured, that’s a bigger job, and we’ll tell you that before we start, not after we “discover” it.
Electric Gate Repair
When a gate swings across a public sidewalk on a Glenville corner lot, the motor and safety edges aren’t optional. We service operators from Viking, DoorKing, and Ghost Controls. We diagnose the failure on site, replace what’s actually broken, and adjust the limit settings so the gate stops where it should, not where it’s drifted. An automatic gate that closes on a kid on St. Clair Avenue is the kind of thing that keeps us up at night. So we test the reversal function every single time.
Electric gate repair in Glenville runs $220 to $550 for most operator and safety-edge problems. Motor replacement is more, and we tell you the price before we order anything.
Post Footing Repair
Here’s the truth about Glenville that surprises people: many gate posts are set in original 1920s-poured concrete that has spalled so badly the post can’t be re-plumbed without demolishing and re-pouring the footing. A homeowner calls expecting a hinge swap. We show up, and the whole post rocks in the ground because the concrete crumbled at grade level. That’s the job. We demolish the old footing, pour a new one, set the post, and re-hang the gate. This is a bigger repair, but it’s the repair that actually holds.
Post footing replacement in Glenville runs $650 to $1,250, depending on gate weight, post size, and access. We’ll give you a written quote before any concrete is ordered.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Glenville
We service nine major gate brands, including Viking, Ghost Controls, and DoorKing. For Glenville customers with older operators, we’ve found these brands hold up well if they’re adjusted and maintained properly. The problem is rarely the brand. It’s the install, the soil movement, or a decade of skipped maintenance. We stock common parts for these operators and can usually get a Glenville gate running the same day we open the hood. If we have to order something, we’ll tell you when it arrives and when we’re coming back. That date doesn’t move unless you move it.
Common Gate Repair Problems We See in Glenville Homes
- Spalled concrete footings from a century of freeze-thaw cycles. Lake-effect moisture seeps into the concrete piers, freezes, and cracks them from the inside. By early spring, the post is tilted and the gate is dragging. March and April are our busiest repair months in Glenville for exactly this reason.
- Rusted hinge posts snapped at the original weld points. Unrestored 1920s iron gates are heavy. The welds at the post base were never designed for a hundred years of standing water and road salt. We see these failures right where the hinge strap meets the post, and we repair them by welding on site, not by hauling the gate to a shop.
- Sliding gates that bind on shared rights of way. Glenville’s narrow side drives and shared driveways leave no room for a swing gate’s arc, so a lot of homeowners have sliding gates. When the old concrete piers shift, the track binds and the gate sticks. We realign the track, repair the rollers, and fix the pier if it’s the culprit.
- Crumbling brick gate piers from the original build. The brick foursquares and two-family frame homes in Glenville were often built with decorative brick piers flanking the gate. After 80-plus years of weather, the mortar fails and the bricks spall. We assess the pier along with the gate, because a gate hung on a dying pier is a gate that’ll be back on the ground by next spring.
Pricing for Gate Repair in Glenville, OH
Here are honest numbers for the Glenville market. A simple hinge and latch repair runs $180 to $260. Gate realignment runs $180 to $340. Replacing a bent hinge post with a new post and setting it in a new concrete footing runs $650 to $1,000. A full post footing rebuild, including demolishing the old 1920s concrete, runs $800 to $1,250. Electric operator repair runs $220 to $550. Weld and rust repair on original ironwork runs $200 to $400 for a typical gate.
These are the prices we quote before work starts. You agree to the number, then we start. Not the other way around. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Ask about those when you call. They’re not hidden, and they don’t require a coupon. Call (877) 610-2993 for an exact quote on your gate. Estimates are free.
We Also Serve Cities Near Glenville
We work all over this side of Glenville and the surrounding neighborhoods. If you’re in Hough, University Heights, Cleveland, or Clark-Fulton, we cover you. The same crew, the same 90-Day Done Right Promise, and the same live person on the phone. Call (877) 610-2993 and tell us where you are.
Serving Glenville, OH - Our Local Coverage Area
We’re based in the Glenville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Glenville
Because Glenville’s original gate posts were set in 1920s-poured concrete that has spalled after 85 to 110 years of freeze-thaw cycles. The concrete crumbles at grade level, the post rocks, and no hinge swap will fix a post that moves in the ground. We see this constantly. The repair that holds is demolishing the old footing, pouring a new one, and resetting the post. We’ll show you the footing before we touch anything, and you’ll see why a hinge alone won’t do it. Call (877) 610-2993 if your post moves when you push on it.
Yes. A shared right-of-way means two homes relying on one gate, so we work fast and keep the gate passable while we’re on site. Binding usually comes from shifted concrete piers or a track that’s out of level from frost heaving. We realign the track, repair or replace the rollers, and stabilize the pier if it’s moving. The goal is the gate slides like it should and both households can get in and out. Call (877) 610-2993 and we’ll schedule a time that works for both neighbors.
The most dangerous thing is a gate that closes on its own when it shouldn’t. On a corner lot where the gate swings across a public sidewalk, a failed safety edge or reversing mechanism can hit a pedestrian or a kid on a bike. Show me the gate closing on its own and I’ll show you where it’s failing. We check the safety edges, the reversing function, and the hinge integrity every time we do an electric gate repair here. This is not the job to DIY. Call (877) 610-2993 if your automatic gate is closing when it shouldn’t.
You should have the safety edges, the reversing function, and the operator’s limit settings checked by a professional. Public sidewalk proximity means a gate that closes too far, too fast, or without reversing is a real hazard. We test all of that on every electric gate repair in Glenville because so many corner lots here have gates that swing over the walk. We also check the hinge post and footing, because a tilting post changes the swing arc and can make the gate close further than it should. Call (877) 610-2993 and we’ll come check it before it fails.
We work around your access, not the other way around. On a typical hinge and post repair we’ll remove the gate leaf, block it safe, and leave the drive passable. If we’re re-pouring a footing, we’ll coordinate the pour so the new concrete sets while the drive can stay open at least single-file. We’ve done enough shared drives in Glenville to know that one household can’t be locked out because the other’s gate broke. We’ll tell you the plan before we start. Call (877) 610-2993 and we’ll figure out the timing that works for both units.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Glenville with gate repair since 2001.