Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Glastonbury
Gate repair in Glastonbury, Connecticut typically runs $180-$340 for hinge and alignment work, $250-$600 for operator and control board service, and $400-$1,200 when frost-heaved posts need to be dug out and reset below the 48-inch frost line. Most repairs here take one visit, and we carry enough parts on the truck to finish the job the same day. That matters in a town where a gate that won’t close is a real problem: your driveway opens onto Route 17, Hebron Avenue, or a quiet cul-de-sac off Neipsic Road, and a gate stuck open at 10 p.m. is an invitation you didn’t send. Call us at (877) 610-2993 and a live person picks up, day or night.
We’re Gatewood Fence & Gate. Hal Gatewood’s name is on the shop, his address is published, and he’s been doing this since 2001. We fix gates where they hang, in your driveway, not in a warehouse across the state line. If you’re in Glastonbury and your gate is acting up, you’ll get someone who knows exactly what your soil does to a hinge post come March.
Why Gatewood Fence & Gate Is Glastonbury’s Preferred Gate Repair Company
We work in Glastonbury constantly, and that shows up in how we diagnose. When someone on Thompson Street calls about a gate that won’t close all the way, we already suspect frost heave before we back the truck into the driveway. When a Hebron Avenue estate reports a LiftMaster swing operator reversing mid-cycle, our first question is whether the post moved, not whether the board is bad. Local knowledge isn’t a marketing phrase for us. It’s the difference between fixing the real problem and charging you for a part that was never the issue.
Glastonbury homeowners have been calling us for years because we do what we say: we show up on time, we quote a price before any work starts, and every job comes with the 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround. You can also drive to the shop and look him in the eye. The name is on the shop, and the shop is down the road, and that is the oldest accountability there is.
Our repair techs are background-checked and uniformed, and the person who shows up in Glastonbury is the same person who will answer your question about the job next week. Dispatch is coordinated from our Hartford office, but the crews serving Glastonbury live and work in this corridor. We know the difference between a South Glastonbury horse property and a Buttonball Lane colonial because we’ve fixed gates at both, often within the same afternoon.
Why Gatewood Is the Smarter Choice in Glastonbury
- We repair before we replace. If Hal can weld your cracked gate panel on site and have it stronger than the factory joint, you keep your gate and your money. We don’t sell replacement parts that aren’t needed.
- On-site welding. Yep, right in your driveway. Nobody hauls your gate to a shop for a weld we can do at your post.
- 90-Day Done Right Promise. Written on every invoice. If something isn’t right, one call brings us back.
- A live person answers, 24/7. Not a voicemail, not an answering service three states away, not a chatbot. Call (877) 610-2993 at 2 p.m. or 2 a.m. and you’ll get a person.
- Upfront pricing. We tell you the number before we touch a wrench. The quote doesn’t change when we arrive. Senior and veteran discounts of 10% are permanent, and we offer $40 off any repair over $200. No haggling required.
- Certified on nine major brands. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate has a brand name on it, we probably service it.
Our Gate Repair Services in Glastonbury
Whether it’s an automated iron gate on an estate lot or a wooden farm gate on a horse property, the repair work starts the same way: we find out why it’s failing, and we fix the cause, not the symptom. Here’s what we handle across Glastonbury.
Electric Gate Repair
Electric gate systems in Glastonbury’s older subdivisions were mostly installed between the 1980s and 2000s, and the control boards inside them are now obsolete. That means a board that fails can’t always be swapped one-for-one; sometimes we retrofit an older operator with a modern board, sometimes a full operator replacement is the honest answer. We diagnose in place, show you what we found, and quote both options when that’s the case.
Automatic Gate Repair
Automatic gates here fail in patterns that change with the calendar. In March, we see a wave of operator recalibrations on Neipsic Road and Hebron Avenue estate gates because frost heave shifted posts and threw the limit switches out of spec. In summer, it’s more likely a bad photocell, a worn gear, or a loop detector on a long driveway. We service Viking, Ghost Controls, Linear, DoorKing, LiftMaster, and more.
Hinge & Post Repair
This is the work Glastonbury needs most, and the work that tells you whether the last company actually fixed anything. A gate sags in the hinge post, not in the middle, and that’s where we start. Central Connecticut’s frost depth reaches 48 inches, and Glastonbury’s Connecticut River valley soils hold moisture in the clay and heave aggressively. A post can move two inches out of plumb in a single winter. We dig below the frost line, repack with gravel, and set the post so it stays put for years, not seasons.
Gate Realignment
When a gate drags on the ground or won’t latch, realignment is usually the fix. We check the posts, the hinge wear, and the gate frame’s rack before touching the operator limits. In Glastonbury, realignment is rarely just adjusting a hinge shim; it’s usually correcting the accumulated movement from a decade of freeze-thaw cycles. Fix the panel without the post and you’ll fix it twice, which is why we measure the post first.
Lock Repair & Weld and Rust Repair
Locks on Glastonbury gates take a beating from de-icing salt, wet winters, and just age. We repair or replace them, including keypad and intercom locks on automated systems. And when an ice storm bends a wrought-iron panel or snaps a weld point, we weld it back on site, grind it smooth, and paint it. A cracked ornamental panel doesn’t mean a new gate, not when the steel is sound and the welder is already in the truck.
Trusted Brands We Service in Glastonbury
Your gate has a brand, and somebody has to know it inside out. We service Linear, Viking, DoorKing, Ghost Controls, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. For Glastonbury customers, that means we keep the common control boards, photocells, gear assemblies, and receiver modules for these brands stocked on the trucks that run to this area. It cuts turnaround time dramatically; when your swing gate is down on Main Street, we show up with the part, not a promise to order it.
Common Gate Repair Problems We See in Glastonbury Homes
- Frost-heaved posts and hinge posts out of plumb. Glastonbury’s frost depth reaches 48 inches in high-clay river valley soils. Clay holds water, water freezes and expands, and the post moves with it. That is the single most common driver of gate-post shifting and hinge misalignment in this town, period.
- Obsolete control boards on 1980s-2000s estate operators. Boards that predate modern safety photocell protocols or keypad entry can’t always talk to today’s accessories. Sometimes a retrofit is possible; sometimes the honest answer is a new operator. We’ll tell you which, and quote both.
- Snapped welds after ice storms. Hartford County takes ice storms hard, and Glastonbury sits in the thick of it. Ice adds hundreds of pounds to an ornamental iron panel, and when it falls or the wind takes it, the panel bends and welds snap. We weld on site.
- Intermittent failures from corroded underground wiring. Intercoms and loop detector wires run underground, and our clay retains moisture against the insulation for months. Corrosion makes gates fail sometimes-but-not-always, which is the most annoying kind of failure. We trace it, find the bad section, and fix it.
- Sagging wooden farm gates in South Glastonbury. The frost heave that pushes a steel post also moves wooden posts. Clay soil holds a wooden post like a vise until March, then squeezes it out of plumb. South Glastonbury horse and orchard properties generate a surge of farm-gate repair calls every spring for exactly this reason.
Pricing for Gate Repair in Glastonbury, CT
Here are honest numbers for Glastonbury’s market. Hinge and post repair: $180-$340. Gate realignment: $150-$350, depending on the post condition. Electric / automatic gate operator service and control board replacement: $250-$600. Full operator replacement on a 1990s estate swing gate: $900-$2,200, depending on brand and gate weight. Weld and rust repair on ornamental panels: $120-$450. Post excavation and reset below frost line: $400-$1,200 per post. Every quote is written and agreed before we start, and you’ll never see a bigger number at the door. Call (877) 610-2993 for a free estimate, and remember: $40 off any repair over $200, no trip charge inside Hartford County, and a free second opinion on any written estimate from another company.
We Also Serve Cities Near Glastonbury
Our Gate Repair in Glastonbury team also covers Glastonbury Center, Manchester, East Hartford, and Wethersfield. If you’re on the edge of town near the East Hartford line or out toward the Manchester border, you’re still in our service area and still get the same upfront pricing and 90-Day Done Right Promise. Call us and a live person will tell you exactly when the truck can be in your driveway.
Serving Glastonbury, CT - Our Local Coverage Area
We’re based in the Glastonbury area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Glastonbury
Glastonbury’s Connecticut River valley soils are high in clay, and our frost depth reaches 48 inches. Clay holds moisture, that moisture freezes and expands, and the expansion pushes posts upward and outward, every single winter, year after year. The fix isn’t shims; it’s digging the footing below the frost line and bedding the post in gravel so water can drain away and the freeze cycle can’t grab it. That’s standard practice for us here, and it’s the difference between a gate that stays plumb for a decade and one that needs realignment every March. Call (877) 610-2993 and we’ll come look at your post before the next freeze.
It depends on the control board. Many 1990s boards can’t translate modern photocell signals, and retrofitting means replacing the board and often the receiver and remote modules too. At that point, a full operator swap is frequently cheaper over five years than Frankensteining a system that will fail again. We’ll diagnose your specific operator, show you the board, and quote both paths so you can see the numbers side by side. Call (877) 610-2993 for a free estimate.
Because the post is moving, not the hinges. South Glastonbury’s farm gates are mostly wooden posts set in the same clay that heaves the steel posts on Neipsic Road. Every spring, the freeze-thaw cycle pushes the wooden post a fraction of an inch out of plumb, and the sag compounds. Tightening the hinge only pulls the gate tighter against a post that’s already drifting. The reliable fix is digging the post hole below frost line, treating the wood, and setting it in gravel. It’s a full day of work, but it’s the only way the gate stays square. Our team does this work all through March and April in South Glastonbury. Call (877) 610-2993 to get on the schedule before the frost comes out of the ground.
Nine times out of ten, the post has moved and the limit switches are now set for the gate’s old position, not its current one. The operator is doing its job: it senses resistance where it didn’t expect it, and it reverses for safety. The repair is to reset the post, re-hang the gate, and recalibrate the limit stops and safety photocell. We do this on Neipsic Road and Hebron Avenue estate systems every spring. Show me the gate closing on its own and I’ll show you where it’s failing, and that’s where we start. Call (877) 610-2993 and we’ll come diagnose it.
In most cases, welding is absolutely worth it. Cast and wrought iron panels crack at stress points, but the surrounding steel is usually sound. We weld the crack on site, grind the joint flush, and repaint so the repair disappears. A new leaf on a full ornamental gate can run into the thousands; a proper weld repair usually runs $120-$450. If the panel is too far gone, we’ll be the first to say so, and we’ll quote replacement with no pressure. You keep the decision. Call (877) 610-2993 for a straight answer.
When your gate won’t close in Glastonbury, or it’s sagging, or it stopped on a March morning and you’re watching the driveway from the kitchen window, call Gatewood Fence & Gate at (877) 610-2993. A live person answers, and Hal knows exactly what your posts are doing under that clay. We’ll quote you before any work starts, fix it right, and back it with the 90-Day Done Right Promise. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Glastonbury since 2001.





Before
After
Before
After
Before
After