Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Gig Harbor
Gate repair in Gig Harbor usually means one of two calls: a swing gate that drags on the driveway, or an operator that opens and closes on its own schedule. Both are fixable, and most repairs in Gig Harbor run between $180 and $520 depending on whether we’re resetting a shifted hinge post or replacing a salt-corroded control board. Call (877) 610-2993 and a live person answers, day or night. We’ve been working on Gig Harbor gates long enough to know what the marine air does to them, and we fix it in your driveway, not in a shop across the bridge.
Hal Gatewood has been at this since 2001. His name is on the shop, his address is published, and when you call about a sagging gate in the 98335 hillsides, the person who answers actually knows what a glacial clay soil line looks like. That’s the difference between a gate repair company and a guy who fixes gates in Gig Harbor.
Why Gatewood Fence & Gate Is Gig Harbor’s Preferred Gate Repair Company
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Hal’s name is on every invoice, and the 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, one call brings him back. No runaround, no call center three states away. A live person answers the phone 24/7, which matters when your gate won’t close at 11 p.m. and you have a dog who’s figured that out.
Gig Harbor customers call us because we don’t push replacement on a gate that needs a weld. Our crews carry welding gear to the site and fix the panel without hauling it off. We’ve rebuilt ornamental iron gates within a mile of the water that other companies said were scrap. Fix the post without the hinge and you’ll fix it twice. So we start at the post, every time, because that’s where Gig Harbor gates fail first.
We dispatch from our Seattle office, and our crews serve Gig Harbor locally. Response time to most Gig Harbor neighborhoods runs same-day or next morning for non-emergency calls, and we prioritize emergency service when a gate is stuck open or won’t close. Customers in Artondale, Wollochet, and out near the 98332 shoreline all get the same live answer and the same written promise.
Our Gate Repair Services in Gig Harbor
Electric Gate Repair
Electric gate problems in Gig Harbor usually trace back to one of three things: a control board corroded by salt air, a limit switch that’s drifted out of adjustment, or a power supply that’s been cycling through brownouts. We service LiftMaster, FAAC, BFT, Linear, and Viking operators on-site, in your driveway. If the board is salvageable, we save it. If it’s toast, we quote you a price before we touch a tool, and you agree to that number before any work starts.
Automatic Gate Repair
Automatic gates in Gig Harbor work hard through wet winters and dry summers. The actuators and arms take the worst of the marine air, especially within a mile of the Sound. We see actuator arms pitting and seizing years earlier than they would in Puyallup or Auburn. Our repair-first approach means we weld, rebuild, and reinforce what’s still sound, rather than ordering a whole new operator because one arm wore out.
Hinge & Post Repair
This is the repair most Gig Harbor gates actually need, even when the call comes in as “my gate won’t open.” Hinge posts in Gig Harbor’s clay-heavy glacial soil shift every wet season. The ground swells, the footing moves, and suddenly the gate drags on the latch side. We pull the post, pour a deeper concrete footing with gravel drainage, and reset it plumb. Then we check the hinges for corrosion. Near the water, we swap barrel hinges for stainless steel so you’re not rebuilding the same post in three years.
Gate Realignment
A gate that racks out of plumb in Gig Harbor is almost always a post problem, not a hinge problem. We’ve reset posts in the 98335 hillsides that had leaned 3 inches after one wet winter. Realignment means bringing the gate back to square, then addressing the drainage around the footing so the next wet season doesn’t undo the work. If the post is rotted at the base from perpetual damp, we replace it with pressure-treated timber or steel set on a gravel bed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gig Harbor
We’re certified to service nine major gate brands, and Gig Harbor customers most often call us for LiftMaster, FAAC, BFT, Linear, and Viking units. We stock common parts for these systems locally, which means faster turnaround when your operator board fails in February and you don’t want to wait two weeks for a part from a warehouse in Texas. Link to Gate Repair if you want the full breakdown of what we service, but the short version is: if it opens a gate, we work on it.
Common Gate Repair Problems We See in Gig Harbor Homes
- Shifted hinge posts from clay soil expansion. The glacial till under Gig Harbor’s hillside neighborhoods swells in the wet season and shrinks in the summer. That cycle racks posts out of plumb annually, and a “sagging gate” call here is almost always a shifted footing, not a worn hinge.
- Salt-corroded control boards and limit switches. Marine air off Puget Sound carries salt deposits that eat at circuit boards and switch contacts. LiftMaster and FAAC units within a mile of the water often show erratic cycling within three to five years.
- Rust-through at welds and latch hardware. Ornamental iron gates near the harbor develop rust at the weld joints and latch points first. We weld-repair these on site and replace the hardware with stainless steel where it makes sense.
- Rotted wood posts from perpetual damp. The forested hillsides around Gig Harbor stay damp year-round. Wood gate posts in those microclimates rot at the soil line, and frost-heaved concrete piers make rack-and-pinion slide gates bind and jump.
Pricing for Gate Repair in Gig Harbor, WA
Most gate repairs in Gig Harbor fall between $180 and $520. A hinge and post reset typically runs $240 to $420, depending on whether we’re digging a new footing or working with the existing concrete. Gate realignment runs $150 to $300. Electric gate repairs run $180 to $450, with control board replacement on the higher end. Weld and rust repair on ornamental iron runs $200 to $500, depending on how many joints need work and whether we’re patching or replacing sections.
We quote every job before we start. You agree to the number, then we work. No trip charge inside the county, and we offer $40 off any repair over $200. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Gig Harbor
We work throughout Gig Harbor and the surrounding communities, including Artondale, Wollochet, Maplewood, and Fircrest. If your gate is acting up and you’re anywhere in the 98329, 98332, or 98335 zip codes, call us. We’ll be there, and we’ll be the ones on the invoice.
Serving Gig Harbor, WA - Our Local Coverage Area
We’re based in the Gig Harbor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Gig Harbor
Your post is leaning because Gig Harbor’s clay-heavy glacial soil expands when it’s wet and shrinks when it’s dry. That seasonal movement shifts the footing. The hinges look fine because the post is the problem. We fix it by pulling the post, digging a deeper footing with gravel drainage, and resetting it plumb. Call (877) 610-2993 and we’ll take a look.
Salt-laden marine air from Puget Sound corrodes operator control boards and limit switches within three to five years. The contacts pit, the board shorts, and the gate starts cycling erratically or refusing to close. We service LiftMaster, FAAC, BFT, Linear, and Viking units and can often rebuild a board in place rather than replacing the whole operator.
Years of salt fog and sea spray settle into the weld joints and latch hardware, and those spots rust through first. Ornamental iron gates within a mile of the water in 98332 show this pattern predictably. We weld-repair the affected joints on site and replace latch hardware with stainless steel. The gate stays in your driveway.
The combination of salt air on the metal teeth and clay-soil movement torquing the track wears rack-and-pinion gears faster than inland. When the post or track shifts, the pinion doesn’t mesh cleanly, and every cycle drags metal against metal. We realign the track, reset the posts if needed, and replace the rack with a galvanized or stainless spec that stands up to the coastal air.
Yes. Automatic gates in Washington state must have functioning safety photocells and obstruction sensors. We check the photocell alignment on every automatic gate service call, because a gate that faults at the end of travel is often a sensor that’s out of line, not a bad motor. We’ll quote the fix before we start, and the 90-Day Done Right Promise covers it in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Gig Harbor since 2001.