Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fleming Island
Gate repair in Fleming Island usually runs between $185 and $520 for hinge, post, and weld work, while operator and control board replacements typically land between $340 and $780. Most calls in Fleming Island Plantation and the surrounding subdivisions come from the same root cause: mid-2000s developer-installed equipment finally hitting the end of its service life, combined with river humidity eating at the steel underneath the powder coat. We answer the phone day and night at (877) 610-2993, and we show up when we say we will.
Fleming Island is different from Orange Park or Lakeside in one way that shapes nearly every gate call we run here: the island was built out almost entirely in a single suburban boom between the late 1990s and the mid-2000s. That means hundreds of community entrance gates, swing operators, slide operators, keypads, and photocells across Fleming Island Plantation and the surrounding HOA-governed subdivisions were installed by the same developer contractors using the same limited set of operator brands. They are now all reaching end-of-service within the same narrow window. When one HOA entrance on Town Center Boulevard fails, the one two streets over is usually weeks behind it. We stock control boards and weld-on hinge sets for that specific mid-2000s equipment generation, so we can often run back-to-back calls in a single Fleming Island neighborhood off one parts inventory. That is not something a national company can replicate, and it is why we can be in your driveway faster than most.
If your gate is sagging, screeching, stuck open, or dead at the keypad, call (877) 610-2993. You will get Hal Gatewood or a member of his crew on the phone, not a voicemail tree. We have been fixing gates since 2001, and our name is on the shop. That is the oldest accountability there is.
Key Takeaways for Fleming Island Homeowners
- Hinge and post repairs dominate here because the peninsula between the St. Johns River and Doctor’s Lake keeps steel hardware damp year-round.
- Most Fleming Island community gates use the same mid-2000s developer-installed operator generation, so parts are standardized and we stock them locally.
- Summer lightning routinely destroys gate operator control boards and keypad electronics on the island; surge-damaged board replacement is one of our most common single-visit repairs.
- Every job carries the 90-Day Done Right Promise in writing. If it isn’t done right, one call brings us back.
- We give you the price before any work starts. There is no trip charge inside the county, and $40 off any repair over $200.
Why Gatewood Fence & Gate Is Fleming Island’s Preferred Gate Repair Company
We are locally owned and owner-operated. Hal Gatewood founded the company in 2001, and his name is on the shop and on every invoice. That is not a marketing line; that is a statement of how the business runs. If you are not happy with a repair, you can drive to the shop and look him in the eye. You are not going to reach a call center three states away. You will get a live person, 24 hours a day, 7 days a week, and that person will actually know what a swing gate hinge post is.
Our reputation in Fleming Island comes from the repair-first philosophy. Other companies want to replace a gate when the real problem is a corroded hinge post or a board that can be swapped in 40 minutes. We fix the gate in your driveway rather than hauling it off or swapping parts that do not need swapping. We weld on site. If your ornamental aluminum gate has a cracked weld or a rusted-through hinge mount, we repair it where it stands. Fix the panel without the post and you will fix it twice. We start at the post.
Hal has been at this for over 29 years. He gets genuinely annoyed when he finds sloppy work somebody left behind, and that annoyance is your guarantee. Every Fleming Island job carries the 90-Day Done Right Promise in writing. Not buried in fine print. Stamped on the paperwork.
Our Gate Repair Services in Fleming Island
Electric Gate Repair
Electric gate repair in Fleming Island is usually a matter of diagnosing the operator, the transformer, the keypad, the photocells, or the wiring between them. On Fleming Island Plantation entrance gates in particular, we see a concentrated pattern: the mid-2000s operator generation that was installed across dozens of community entrances is reaching the 15-to-25-year end-of-service threshold all at once. That means we can often identify the failure mode before we even arrive, because we have already worked on the identical setup three streets over. If your gate opens partway and stops, or the keypad works but the motor does not, call us before you assume the whole system needs replacing.
Automatic Gate Repair
Automatic gate repair in Fleming Island almost always comes down to one of three failures: a burned-out operator motor, a surge-damaged control board, or a misaligned safety photocell. Northeast Florida’s summer lightning storms are magnets for gate electronics on the island. We replace surge-damaged boards on FAAC, Viking, Ghost Controls, DoorKing, and Elite operators regularly. Our Gate Repair team carries the boards and relays for the brands most common in Fleming Island so we are not waiting on a shipment while your community entrance sits stuck open.
Hinge & Post Repair
This is the one we run more on Fleming Island than almost anywhere else we serve. The island’s peninsula geography, bracketed by the St. Johns River and Doctor’s Lake, traps humidity year-round and that moisture works its way into steel rollers, hinges, and latch hardware. The result is sagging gates long before the operator fails. A gate sags in the hinge post, not in the middle, and that is where we start. We cut out the corroded steel, weld in new hinge mounts on site, and get the gate swinging level again. If your gate drags on the pavement at the latch end, the post is the problem.
Gate Realignment
Gate realignment on Fleming Island is not a matter of twisting a few bolts and calling it done. The uniform developer-installed gates across Fleming Island Plantation were built to consistent specs, which means we know the tolerances and pivot geometry of the specific ornamental aluminum panels used in your subdivision. We adjust hinge post plumb, re-set the operator arm, and realign the safety photocells so your gate closes fully and reliably. Show me the gate closing on its own and I’ll show you where it’s failing. We would rather find the failing point now than bill you for a service call next month.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fleming Island
We are certified to service nine major gate brands, including the ones most common across Fleming Island’s HOA communities: Viking, Ghost Controls, DoorKing, and Elite. Because Fleming Island’s developer contractors equipped dozens of community entrances with the same operator generation in the same build years, we stock boards, relays, and weld-on hinge sets for that specific mid-2000s equipment. That hyper-local parts inventory means fewer return trips and faster turnaround for Fleming Island customers. If your gate opener is a brand we do not service, we will tell you on the phone and point you in the right direction. We would rather give you an honest answer than waste your afternoon.
Common Gate Repair Problems We See in Fleming Island Homes
- Rusted hinge posts and sagging gates. The humidity between the St. Johns River and Doctor’s Lake keeps steel damp, and over 15 to 20 years that rust eats through the hinge mounts on ornamental aluminum gates. We weld new ones on site.
- Surge-damaged operator control boards. Florida summer lightning storms destroy gate electronics. On Fleming Island, we have replaced boards on identical mid-2000s FAAC and Viking operators in the same week across multiple HOA entrances.
- Same-vintage equipment failure across the subdivision. Because nearly every community entrance on the island was built in the same 1995-2010 window with the same operator generation, multiple gates fail within weeks of each other during storm season.
- Photocell misalignment from sagging mounting posts. As hinge posts corrode and shift, the safety photocells creep out of alignment and the gate refuses to close, or reverses mid-cycle. We re-level the posts and re-align the cells in the same visit.
Pricing for Gate Repair in Fleming Island, FL
Hinge and post weld repairs in Fleming Island typically run $185 to $420, depending on the amount of corrosion and whether the post needs to be re-plumbed. Gate realignment work ranges from $140 to $260. Electric gate repair, including surge-damaged control board replacement, runs $340 to $780 depending on the operator brand and board generation. Keypad and lock repair typically falls between $120 and $240. The price we quote is the price you pay, agreed before any work starts. There is no trip charge inside the county, $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote, and the estimate is free.
We Also Serve Cities Near Fleming Island
Our Gate Repair in Fleming Island coverage extends to the surrounding communities of Orange Park, Lakeside, Bellair-Meadowbrook Terrace, and Fruit Cove. If you are in one of those areas and your gate has stopped cooperating, call us and we will be straight with you about when we can be there.
Serving Fleming Island, FL - Our Local Coverage Area
We’re based in the Fleming Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fleming Island
Most Fleming Island Plantation subdivisions and the surrounding HOA-governed communities do require architectural review committee approval when a gate’s style, height, finish, or material changes, but repairing an existing gate in place generally does not trigger that process. Painting a repaired section to match the original is part of the work. If your HOA requires a written repair scope or a specification sheet for the board, we will provide one. Call (877) 610-2993 and we will help you sort out what your management company needs before we start.
Because Fleming Island was built out almost entirely in one suburban boom from the late 1990s through the mid-2000s, and the developer contractors installed the same operator generation across dozens of community entrance gates in that window. Those operators are now hitting the 15-to-25-year end-of-service threshold simultaneously. When one gate in your subdivision fails during storm season, the one at the next entrance is usually weeks behind. That concentration is specific to Fleming Island’s single-generation development pattern. Call us for a board replacement and we will stock the parts to handle the next one.
Yes. The ornamental aluminum and wrought-iron gate panels used in Fleming Island Plantation and the surrounding master-planned subdivisions were built to uniform developer specifications, so the panel profiles, picket spacing, and finish colors are highly consistent across the area. We weld on site, so we can repair a cracked weld or replace a damaged section without changing the gate’s overall appearance. We will match the original finish on any repaired section. Call us for a specific answer about your gate’s panel style.
We treat a downed community entrance gate as an emergency, and we answer the phone 24/7. At a Fleming Island Plantation entrance on Town Center Boulevard, we replaced a mid-2000s FAAC swing gate operator control board after a lightning strike, swapped the corroded hinge post on the matching aluminum gate, and realigned the safety photocells all before lunch from one parts inventory, because a dozen nearby entrances use the same developer-installed equipment. We coordinate directly with your property management company and provide a written invoice and repair description for the HOA’s records. The price is agreed before any work starts, so the HOA board knows the number up front.
Yes. Fleming Island’s peninsula geography between the St. Johns River and Doctor’s Lake traps humidity year-round, so steel rollers, hinges, and latch hardware on community gates oxidize faster than they do in inland Clay County towns. Hinge post and weld repairs are more frequent here than operator board failures, which is the opposite of what we see in drier inland communities. If your gate is sagging at the latch end, the hinge post is rusting from the inside out. Call us and we will show you exactly where before we touch a bolt.
Call Gatewood Fence & Gate for Gate Repair in Fleming Island, FL
If your gate is sagging, stuck, or dead at the keypad, call (877) 610-2993 right now. You will get a live person. We will give you a straight answer about the likely problem, a real price range before we arrive, and a written quote before any work begins. Every job carries the 90-Day Done Right Promise. We have been fixing gates since 2001, and the name is on the shop. That is the oldest accountability there is. Call (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fleming Island.