Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fillmore
Gate repair in Fillmore usually starts with the same two problems: a post that’s cracked at the concrete collar, or an operator that quit after one bad Santa Ana night. We fix both, usually same day, and we do it in your driveway rather than hauling the gate off somewhere. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood still takes the calls. If you’re off Chambersburg Road or out on a citrus parcel with a pipe-rail gate that won’t swing square, call (877) 610-2993 and a live person answers.
Why Gatewood Fence & Gate Is Fillmore’s Preferred Gate Repair Company
We’re not a call center and we don’t hand your job to a stranger. Hal Gatewood’s name is on the shop and on every invoice, and his address is published where anyone in 93015 or 93016 can look it up. That’s the oldest kind of accountability there is. The person who shows up at your gate is background-checked and uniformed, and they report to Hal, not to a dispatcher three states away.
Fillmore customers call us because we understand what a farm gate actually goes through. A sagging ornamental iron gate in a Ventura suburb is one thing. A thirty-foot pipe-rail gate that’s been clipped by a bin trailer off Guiberson Road is another. We weld on site. We excavate the post footings when the collar’s cracked. We fix the gate in place instead of telling you it’s time to replace everything.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no “in most cases” hedging. That’s the promise, plain as it sounds.
Our Gate Repair Services in Fillmore
Electric Gate Repair
Most electric gate failures in Fillmore trace back to two local realities: wind and mineral-heavy water. Santa Ana gusts that funnel through the Santa Clara River Valley routinely push past 50 mph, and a gate that fights the wind burns out motors and control boards faster than one that swings free. Meanwhile, Fillmore’s hard groundwater creeps into hinge joints and hardware, adding resistance and rust. We diagnose the actual failure, replace only what’s dead, and adjust the limits so the operator isn’t fighting the gate on every cycle.
Automatic Gate Repair
An automatic gate in Fillmore earns its keep. Long driveways off Highway 126, orchard entrances, ranch lanes off Goodenough Road: these aren’t decorative gates that open twice a day. They cycle constantly during picking season. When an operator fails, we don’t just swap the board and leave. We check the load, the limit settings, the safety edges, and the physical condition of the gate itself, because a bent frame or a dragging hinge will kill a brand-new operator in a season.
Hinge & Post Repair
This is where we differ from a residential gate company. In Fillmore, the hinge post is the weak point. Tractor strikes and bin trailer clips crack the concrete collar just below grade, and the gate sags slowly until it won’t latch or it scrapes the ground. We excavate the old footing, set a new heavy-walled steel post in a deeper pier, and re-hang the gate square. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
When wind twists a frame or a post shifts, a gate that swung true for twenty years starts binding. We re-align the hinges, re-square the frame, and often add bracing or gusset plates so the next big wind event doesn’t undo the work. On Fillmore orchard gates, we look for the hairline crack at the concrete collar first, because that’s the common failure mode here, not worn hinge pins.
Trusted Brands We Service in Fillmore
We’re certified to service nine major gate brands, and we work on all of them in Fillmore regularly: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Fillmore customers specifically, we keep common Linear, Viking, and Ghost Controls parts on the truck, because those are the brands we see most often on local ranch and orchard properties. If you’ve got a DoorKing on a wide slide gate down a farm lane, we have the experience to rebuild it rather than tell you to replace it.
Common Gate Repair Problems We See in Fillmore Homes
- Hinge post cracks at the concrete collar. A tractor or bin trailer catches the post, the collar cracks below grade, and the gate sags mid-season. It looks plumb from a distance until it doesn’t.
- Santa Ana wind damage. Gusts over 50 mph through the river valley blow gates off their hinges, twist frames, and burn out automatic operators in a single storm. We see it every season.
- Rust on galvanized farm gate hardware. Fillmore’s mineral-heavy groundwater accelerates corrosion on bare-steel hinges and older galvanized pipe-rail frames that sit outdoors year-round.
- Operator failures from constant farm traffic. Orchard gates cycle dozens of times a day during picking season. That’s not a suburban duty cycle, and residential-grade operators can’t hold up.
Pricing for Gate Repair in Fillmore, CA
You’ll know the price before we start, and it won’t change at the door. We quote the job, you agree to it, and then we do the work. No surprises.
- Hinge & post repair in Fillmore typically runs $325-$650, depending on whether we’re excavating and resetting a footing or just re-welding a cracked collar.
- Gate realignment runs $175-$380 for most residential gates; wide farm gates with frame straightening run higher.
- Weld & rust repair runs $95-$450, depending on extent and whether we’re patching steel or rebuilding a hinge assembly.
- Electric gate and operator repair runs $180-$550 for most board, limit switch, and motor failures. We don’t mark up parts.
We’re offering $40 off any repair over $200, plus a permanent 10% discount for seniors and veterans. No trip charge inside the county. And if you’ve got a written estimate from another company, bring it to us for a free second opinion.
We Also Serve Cities Near Fillmore
If you’re outside Fillmore proper, we still cover the whole corridor. We handle Gate Repair in Fillmore and the surrounding communities, including Moorpark, Santa Paula, Simi Valley, and Camarillo. Same owner-operated crew, same published address, same 90-Day Done Right Promise.
Serving Fillmore, CA - Our Local Coverage Area
We’re based in the Fillmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fillmore
Because the hinge post, not the gate panel, is usually the real problem. In Fillmore’s citrus corridor, tractors and bin trailers clip the post at the ground line, cracking the concrete collar. A repair that only straightens the frame leaves that crack in place, and the gate sags again within a season. We excavate the post, fix the footing, and then straighten the frame, in that order. Call (877) 610-2993 for an exact quote, and remember the $40-off-any-repair-over-$200 offer.
Yes, and it’s common here. Fillmore ranch properties off the main road often have no practical mains power at the gate, so solar-charged operators are the standard answer. The catch is that a wide slide gate needs a properly sized battery bank and panel array, and the operator has to be matched to the gate’s weight and cycle count. An undersized solar system works for a month and then quits. We size them for the actual gate, not the brochure. Call (877) 610-2993 and we’ll assess yours in person.
They burn them out faster. The Santa Clara River Valley funnels wind through Fillmore, and gusts past 50 mph push against the gate panel, adding load to the motor, the chain or screw drive, and the control board with every cycle. An operator that’s already marginal fails after one bad storm. We set limits and force profiles with the local wind load in mind, and we reinforce the frame so the wind has less to work against. Call (877) 610-2993 for a free estimate.
You almost certainly have a hairline crack at the concrete collar, just below grade. It’s the signature Fillmore farm gate failure. The post looks plumb from a distance, but the crack lets it shift under load, so the gate drops and binds exactly when your equipment is moving through. We dig down, confirm the crack, and reset the post in a deeper pier. Fixing only the hinges won’t hold. Call (877) 610-2993 and we’ll come out and check it.
Yes. California requires automatic gate operators to have entrapment protection, including reversing edges or photo eyes, on farm and ranch gates just as on residential ones. If your orchard gate has an older operator without working safety edges, it’s not just a liability issue, it’s a code violation. We install and test proper entrapment protection on every automatic gate we service, and we’re happy to walk you through what your specific gate needs. Call (877) 610-2993 for a free estimate.
Contact Gatewood Fence & Gate for Gate Repair in Fillmore
If your gate is sagging, jammed, or dead, call us at (877) 610-2993. A live person answers, day or night. We’ll set a time, show up in the window we promised, and quote the job before any work begins. The 90-Day Done Right Promise is in writing on every invoice, and Hal’s name is on the shop. That’s how we’ve done it since 2001, all over Fillmore, and that’s how we’ll do it at your gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fillmore since 2001.