Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fernandina Beach
Gate repair in Fernandina Beach typically costs between $185 and $640 depending on the failure, and most hinge, realignment, and welded repairs are completed the same day we arrive. If you’re off Sadler Road, in the historic district near Centre Street, or out toward Amelia Island Plantation, we know the roads and we know what salt air does to a gate. Call (877) 610-2993 and a live person answers, any hour, any day.
Fernandina Beach is a narrow barrier island with the Atlantic on one side and the Amelia River on the other. Every gate out here gets salt spray from two directions at once. That’s not a small detail. It means hinges seize faster, posts rot at the base sooner, and operator boards fail in ways you just don’t see 30 miles inland in Jacksonville. Our Gate Repair team treats Amelia Island hardware differently because it has to be treated differently.
Key Takeaways
- Most Fernandina Beach gate repairs run $185-$640, quoted and agreed before we start.
- Salt air from both the ocean and the Intracoastal corrodes gate hardware roughly twice as fast as inland Florida.
- We weld on site, in your driveway. The gate doesn’t leave your property.
- Every job carries the 90-Day Done Right Promise in writing.
- Hal Gatewood is the owner. His name is on the shop and on every invoice.
Why Gatewood Fence & Gate Is Fernandina Beach’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001 and never built it around a call center or a rotating crew of subcontractors. The person who answers the phone at (877) 610-2993 works for Gatewood. The person who shows up to your driveway is background-checked, uniformed, and trained to service nine major gate brands, including FAAC, Linear, and Viking operators that are common on Amelia Island. We’re not a national outfit quoting one price on the phone and changing it at the door. The price we quote is the price you pay, and it’s agreed in writing before any work starts.
Fernandina Beach homeowners tend to check a company out before they hand over a gate repair. That’s smart. Our address is published. Our license number is published. If you want to drive to the shop and look Hal in the eye before he touches your gate, you can. That’s the oldest accountability there is, and it still works.
We answer 24 hours a day because a gate stuck open at 2 a.m. off First Coast Highway is not something you want to leave until morning. The live person who answers isn’t reading from a script. They’ll tell you honestly what we can do, when we can get there, and what it will cost. No trip charge inside the county. $40 off any repair over $200. And if you’re a senior or a veteran, it’s a permanent 10% discount on every job.
Our Gate Repair Services in Fernandina Beach
We repair the gate you have. We don’t sell you a new one because it’s easier for us. On-site welding means we fix the gate in your driveway instead of hauling it off to a shop. Here’s what we handle most on Amelia Island.
Electric Gate Repair
Electric gates in Fernandina Beach fail differently than electric gates anywhere else in northeast Florida. Salt-laden air works its way into enclosures, across circuit boards, and into wire connections. A gate that worked fine in June and died by September usually has a corrosion problem, not a motor problem. We diagnose it on site, replace what actually failed, and seal the enclosure properly so it doesn’t fail again in six months. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
Automatic Gate Repair
Automatic gate operators along the Amelia River and the oceanfront are especially prone to salt-induced moisture intrusion inside the control board housing. We check conduit entry points for salt crystal buildup on every service call, not just when the board is already fried. If you’re within sight of the river on the west side of the island, or a block off the beach on the east side, your operator needs a NEMA-4X rated enclosure at minimum. We spec and install them as a matter of routine.
Hinge & Post Repair
On a swing gate at a home off Centre Street in the historic district, we found the original powder-coated steel hinge post had rotted through at the base from decades of salt-laden air, causing the gate to sag and bind. We cut out the corroded post, poured a new post footing with stainless steel anchors, and replaced the hinges with marine-grade stainless, then realigned the gate so the latch caught cleanly and coated the weld points with a salt-resistant zinc primer before finishing.
That’s the repair we do most in Fernandina Beach and it’s the one that gets done wrong most often. A gate sags in the hinge post, not in the middle, and that’s where we start. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Salt air doesn’t just corrode metal. It changes the way a gate sits. Hinges wear unevenly, posts shift in sandy Amelia Island soil, and a gate that once latched cleanly starts dragging or bouncing off the stop. We realign the gate, replace the worn hinge pins, and make sure the latch and the loop detector still line up. It’s a repair that takes a couple of hours, and it keeps a sagging gate from becoming a snapped hinge or a bent operator arm.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fernandina Beach
We service the brands that are actually installed out here: FAAC, BFT, Linear, and Viking among them. We stock common parts for these operators, which means we’re not waiting a week on a freight shipment while your gate sits open. Hal’s crew is certified on nine major gate brands and they’ll tell you straight if a part is worth replacing or if a marine-grade upgrade will actually save you money over the next five years. In Fernandina Beach, that upgrade is usually the smarter play.
Weld & Rust Repair
Fernandina Beach gets sustained onshore wind from the Atlantic and brackish tidal air from the Intracoastal side year-round. Zinc-plated and painted steel hardware, bolts, brackets, loop detector housings, that stuff rusts through in two to three years here without marine-grade replacement. Weld joints oxidize from the inside out. We cut out the rusted sections, weld in new steel on site, and treat every weld with a salt-resistant zinc primer before finishing. The gate stays in your driveway. You see the repair happen. If it’s not done right, the 90-Day Done Right Promise means one call brings Hal back, no runaround.
Common Gate Repair Problems We See in Fernandina Beach Homes
- Seized hinge pins and rotted hinge posts. Salt air hits the ocean side and the Intracoastal side of the island, so hinges corrode from two directions at once. This is the single most common gate failure we fix in the 32034 and 32035 ZIP codes.
- Operator circuit boards dead from salt-induced moisture. We see this most in oceanfront communities and homes along the Amelia River. The enclosure wasn’t rated for coastal air, salt crystals built up inside, and the board shorted. We replace the board and upgrade the enclosure.
- Sagging wrought-iron and powder-coated steel gates in the historic district. Those 19th-century and early 20th-century homes along Centre Street have beautiful ornamental gates with original hardware that’s decades past its useful life. The hinges and posts fail first, not the gate panel itself.
- Rusted-through brackets and bolts on automated slide gates. In newer communities like Summer Beach and Amelia Island Plantation, the operator might be fine while the mounting hardware crumbles around it. We see this constantly. Marine-grade stainless fasteners fix it permanently.
Pricing for Gate Repair in Fernandina Beach, FL
Here’s what we charge on Amelia Island, and the price is quoted and agreed before any work starts. No trip charge inside the county. $40 off any repair over $200.
- Hinge replacement: $185-$320
- Gate realignment: $150-$280
- Weld repair (cracked or rusted section): $220-$480
- Hinge post replacement (including new footing): $340-$640
- Electric gate circuit board replacement: $260-$580
- Full operator replacement: $850-$1,900
Salt-air damage usually costs more to fix than a simple mechanical failure because we’re cutting out rusted sections and replacing hardware with marine-grade stainless rather than painting over the corrosion. That’s the difference between a repair that lasts and one that fails again in two years. Every quote is free, and if you already have a written estimate from another company, we’ll give you a free second opinion. Call (877) 610-2993 and you’ll get a real number, not a range so wide it’s meaningless.
We Also Serve Cities Near Fernandina Beach
If you’re just over the bridge or down the road, we cover the whole area around Fernandina Beach including Yulee, Atlantic Beach, Nassau Village-Ratliff, and Neptune Beach. Same owner, same crew, same 90-Day Done Right Promise on every job.
Serving Fernandina Beach, FL - Our Local Coverage Area
We’re based in the Fernandina Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fernandina Beach
Fernandina Beach is a barrier island with the Atlantic Ocean on the east side and the Amelia River on the west side. Jacksonville sits 30 miles inland and gets salt air from one direction. On Amelia Island, every gate gets salt spray from two directions at once, so hinges, hinge pins, and posts corrode roughly twice as fast. Zinc-plated hardware that lasts a decade in Jacksonville can rust through in two to three years here. Marine-grade stainless or galvanized hardware is the only real fix. Call (877) 610-2993 and we’ll tell you exactly what’s on your gate and what it needs.
Yes. Homes along the Amelia River and the Intracoastal get brackish tidal air that drives salt crystals into standard enclosures, and the circuit boards fail. A NEMA-4X enclosure is rated for corrosive coastal environments and it’s what we specify on every riverfront and oceanfront repair we do in the 32034 ZIP code. We inspect conduit entry points for salt buildup on every call, because that’s where moisture gets in. If your operator board just died and you live near the water, call (877) 610-2993 for a free estimate on the repair and enclosure upgrade.
It’s almost never the gate panel. In the historic district around Centre Street, those ornamental wrought-iron gates are mounted on original hinge posts that have been absorbing salt air for decades. The post corrodes at the base, the hinges seize, and the gate sags and binds. We cut out the rotted post, pour a new concrete footing with stainless steel anchors, and replace the hinges with marine-grade stainless. The gate itself usually doesn’t need to be replaced at all. That’s what repair-first means to us.
Sometimes, yes, and the reason is honest: salt-damaged gates often need corroded hardware cut out and replaced with marine-grade parts, which costs more than swapping a bolt or greasing a hinge. The repair itself isn’t inflated because of the ZIP code. Our pricing is the same across the county, and it’s quoted and agreed before any work starts. You’ll know the exact number before we touch the gate. Call (877) 610-2993 for a free estimate and we’ll walk you through what the salt has actually done.
Solar openers work fine on Amelia Island from a power standpoint, the sun is not the problem. The problem is the same salt air that kills every other piece of gate hardware. Solar panel brackets, battery terminals, and the control board all need marine-grade protection and regular cleaning. We’ve repaired enough solar systems out here to know that the panel and motor usually survive, and the wiring and terminals corrode first. If you have a solar gate opener and it’s acting up, call (877) 610-2993 and we’ll diagnose it on site.
Contact Gatewood Fence & Gate for Gate Repair in Fernandina Beach
If your gate is sagging, stuck open, or the operator just stopped responding, call (877) 610-2993. A live person answers, 24/7. We’ll give you a free estimate over the phone and set a time that works. Hal Gatewood’s name is on the shop and on every invoice. That’s the accountability you get when you hire us. Free estimates, upfront pricing agreed before work begins, and a 90-Day Done Right Promise in writing on every single job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fernandina Beach since 2001.