Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across East Setauket
Gate repair in East Setauket comes down to one thing most national companies never account for: salt air. A gate that looks fine from the driveway can be corroding from the inside out, and by the time it fails, you’re facing a full operator replacement instead of a simple fix. Hal Gatewood has been repairing gates on the North Shore since 2001, and he knows exactly what the Sound does to iron, steel, and circuit boards. If your gate is sagging, seizing, or the operator just stopped responding, call (877) 610-2993 and a live person will answer, not a voicemail.
Key Takeaways
- Salt-laden air off Long Island Sound corrodes gate hardware in East Setauket years faster than inland communities.
- Most automatic gate failures near the harbor come from internal corrosion, not visible damage.
- Hal fixes gates in your driveway with on-site welding. He doesn’t haul them off or push replacements.
- Every job carries a written 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is East Setauket’s Preferred Gate Repair Company
Our Gate Repair team works the full 11733 zip code, from the long driveways off Old Post Road down toward the water. We’re not a franchise with a rotating crew. The person who shows up is the person whose name is on the shop, and Hal stands behind every weld, hinge swap, and operator diagnostic with a written 90-Day Done Right Promise.
Over the years, East Setauket homeowners have called us after other companies told them to replace a gate that only needed new hinge barrels and a properly sealed operator. That’s the repair-first difference. Hal brings the welder to your driveway and fixes the gate where it stands. No haul-off fees, no mystery “shop time” added to the bill. You agree to a price before any work starts, and that’s the price on the invoice.
Scheduling from our New York City office keeps things coordinated, but the crews serving East Setauket are local to the job. Calls ring to a live person around the clock, so when a nor’easter drops a limb on your slide gate at 9 p.m., someone picks up.
Our Gate Repair Services in East Setauket
Electric Gate Repair
Electric gate failure in East Setauket usually starts where you can’t see it. Salt air infiltrates control boards and wiring connections even when the housing looks sealed. We open the operator, inspect the board for corrosion, test the transformer, and either rebuild the board contacts or replace the unit with a marine-sealed housing rated for coastal exposure. If your gate opens halfway and stops, or the motor hums but nothing moves, we’ll find the actual fault before quoting you a fix.
Automatic Gate Repair
Automatic gates near Port Jefferson Harbor fail from the inside out. A homeowner near the Three Village area recently called because a two-year-old operator quit. The gate looked perfect. The board inside was white with salt corrosion. We replaced it with a marine-sealed FAAC unit and sealed the conduit entry points properly. Automatic gate repair in East Setauket means treating salt exposure as the default condition, not an exception.
Hinge & Post Repair
On a mid-1970s wrought-iron swing gate off Old Post Road, every hinge pin had pitted through from years of salt air. The gate was hanging by one cracked leaf. We cut out the original pins, welded in new stainless barrels, and the gate swings like it did in the Ford administration. That’s hinge repair done right, not greased over and called good. In East Setauket, hinge pins near the Sound typically need replacement within three to five years, not just lubrication.
Gate Realignment
Clay-heavy soil through Brookhaven Town heaves with every freeze-thaw cycle, and East Setauket posts shift. A swing gate that drags in March was probably fine in November. We re-set posts, shim them level, and realign panels so the gate closes square and the safety photocells function properly. If you put off realignment, the gate binds and you’ll be back here again next spring with worse damage.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in East Setauket
We’re certified on nine major gate brands, and for East Setauket customers that matters because salt air is unforgiving to certain operator types. We service FAAC, BFT, Linear, and Viking units regularly. Hal stocks common parts for these brands and orders specialty boards with sealed housings when the job calls for it. Whether your operator is a decade-old Viking slide motor or a newer FAAC swing arm, we know what fails on it near the coast and how to fix it so it stays fixed.
Common Gate Repair Problems We See in East Setauket Homes
- Salt-air pitting on hinge pins and threads. Swing gates seize up when the pins corrode into the barrel. We replace hinges with stainless barrels and set the gate back to plumb rather than spraying penetrant and hoping.
- Control boards corroded from the inside. Even when the housing looks sealed, salt-laden moisture finds a way in. East Setauket operators fail from board corrosion at a rate we don’t see over in Stony Brook or further inland.
- Freeze-thaw heaving of gate posts. The clay-heavy soils common to this part of Brookhaven Town expand and contract through the winter, kicking posts out of alignment every spring. Re-setting posts is routine work here.
- Storm debris from nor’easters. Heavy limbs off the mature trees that line East Setauket driveways land on slide gate racks and bend them. We straighten or replace the rack and re-time the operator so the gate doesn’t bind.
Pricing for Gate Repair in East Setauket, NY
In East Setauket, hinge replacement on a standard wrought-iron swing gate typically runs $180 to $340 per hinge, including removal, welding, and re-hanging. A full automatic gate operator replacement with a marine-sealed unit usually falls between $1,200 and $2,400 depending on the brand and gate length. Post re-setting and realignment generally costs $350 to $650 per post, and weld repair on a cracked steel or iron gate panel runs $150 to $400 per section.
What changes the number? Gate weight, access to the post, whether the operator board can be rebuilt or needs replacement, and how much corrosion has spread beyond the immediate break. We quote the job before we touch it, and the price doesn’t change at the door. Every East Setauket job includes a free written estimate. There’s no trip charge inside the county, and we’ll take $40 off any repair over $200. Seniors and veterans get 10% off, permanently.
We Also Serve Cities Near East Setauket
Our crews work throughout the Three Village area and beyond. If you’re in Setauket-East Setauket, Stony Brook, Port Jefferson, or Port Jefferson Station, we’re a short drive from your gate. Gate Repair in East Setauket is our focus, but the same repair-first approach and 90-Day Done Right Promise follows us everywhere we work.
Serving East Setauket, NY - Our Local Coverage Area
We’re based in the East Setauket area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in East Setauket
Salt-laden air off Long Island Sound gets inside the operator housing and corrodes the control board and wiring connections long before the gate shows visible rust. This failure pattern is specific to the North Shore coastal microclimate. The fix is a marine-sealed operator housing or board with sealed conduit entry points. Call (877) 610-2993 and we’ll open the unit and tell you exactly what’s failing before quoting a repair.
Near the harbor, expect to replace hinge pins and barrels every three to five years. Salt pitting degrades the metal even under paint. Waiting longer means a sagged gate that stresses the post and the operator, and a more expensive repair. We’ll inspect your hinges and tell you honestly whether they need replacement or just adjustment.
It’s very common. The clay-heavy soils under much of Brookhaven Town freeze and expand through the winter, then thaw and settle unevenly in spring. Posts shift, gates bind, and safety photocells trip. We re-set posts each spring all over East Setauket. The fix is a hole that goes below the frost line with proper drainage gravel, so it doesn’t happen again next year.
Yes, and in East Setauket we see it after every major storm. The mature oaks and maples that line so many 11733 driveways drop limbs onto slide gate racks, bending them and throwing the operator off time. We straighten or replace the affected rack section, re-time the operator, and test the safety edges before we leave.
A gate sags in the hinge post, not in the middle. When the hinge pins wear or the post leans, the entire gate drops at the latch side. In East Setauket that wear usually comes from salt corrosion on the pins. We fix the post and the hinges together. Fixing only the panel while the post stays loose means you’ll fix it twice.
Call for a Free Estimate
If your gate is sagging, seizing, or the operator won’t respond, call (877) 610-2993. Hal will answer, or one of the crew will. We’ll schedule a time, show up when we say we will, and give you a written price before any work begins. The 90-Day Done Right Promise is in writing on every job, and Hal’s name is on the shop and on every invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, repairing gates on Long Island’s North Shore since 2001.