Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across East Port Orchard
A gate that won’t close in East Port Orchard isn’t just annoying. It leaves your yard open to the street, and along Sinclair Inlet that means salt air gets to work on any exposed hardware while you’re still deciding who to call. Our Gate Repair team responds to East Port Orchard homes within one business day for most calls, and we quote the price before any work starts. You’ll get Hal Gatewood’s cell number, not a ticket number. Call (877) 610-2993 for a free estimate, and a live person answers.
Why Gatewood Fence & Gate Is East Port Orchard’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 because he kept seeing gates that other companies had “fixed” by swapping parts that weren’t the problem. A gate sags in the hinge post, not in the middle. Fix the panel without the post and you’ll fix it twice. That’s the kind of thing we say on the phone, and it’s why homeowners around Long Lake Road and the neighborhoods off Bethel Avenue keep our number. We show up when we say we will. The person who answers at 2 a.m. is the same person whose name is on the invoice.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. No dispatch queue, no national call center. Scheduling is coordinated from our Seattle office, but the crew that arrives in East Port Orchard is our crew, background-checked and uniformed. Every job carries the 90-Day Done Right Promise in writing: if it’s not done right, one call brings us back, no runaround. We also stand behind our work with a permanent 10% discount for seniors and veterans, $40 off any repair over $200, and no trip charge inside Kitsap County.
Our Gate Repair Services in East Port Orchard
Most East Port Orchard gates are older: hung in the 1980s and 1990s, on sloped lots that drop toward the water, with hardware that’s been fighting salt air since the day it was bolted on. Here’s what we actually do when we show up.
Hinge & Post Repair
On any East Port Orchard property within a half-mile of Sinclair Inlet, steel hinge pins and latch plates rust through in five to seven years. That’s not an exaggeration. We cut out the rotted post, set a new pressure-treated post in concrete with galvanized straps, and hang the gate on marine-grade stainless or powder-coated aluminum hardware. We do this work on site, in your driveway, so the gate stays put.
Weld & Rust Repair
Steel frame gates along the shoreline pick up rust at every weld point and ground contact. We grind it back, weld the cracked joints on site, and coat the repair so it doesn’t come back next winter. If a hinge has rusted completely through, we don’t patch it. We replace the hinge with hardware rated for marine exposure and re-align the gate so it swings clean.
Gate Realignment
Sloped yards are the norm in East Port Orchard, especially on the streets that run downhill toward Beach Drive and the water. Freeze-thaw cycles heave post footings just enough that the latch misses by half an inch. We reset the post, true the hinges, and make sure the gate clears and latches with a full inch of play. Our crew rebuilt a sagging chain-link driveway gate on a sloped lot off Beach Drive where the original 1980s hinge post had rotated in its footing and marine air had seized the lower hinge. New post, new hardware, latch cleared by a full inch.
Electric Gate Repair
Automatic gates in East Port Orchard fail in ways inland gates don’t. Obsolete control boards from the 1990s take on salt-laden condensation year after year, and one day the operator just stops mid-travel. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We can often retrofit an older operator with new safety edges and a fresh control board for far less than a full replacement, and we’ll tell you honestly when replacement is the cheaper answer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in East Port Orchard
We’re certified to work on nine major gate brands, but around East Port Orchard we see a lot of FAAC and BFT operators on the older waterfront properties, and plenty of Linear and Viking hardware on mid-1990s homes off Bethel Road. Because we stock common parts for these brands locally, we can usually complete a board swap or hinge replacement in a single visit. You don’t wait two weeks for a part to ship from a warehouse in another state.
Common Gate Repair Problems We See in East Port Orchard Homes
- Rusted-through hinge pins near the shoreline. Within a half-mile of Sinclair Inlet, marine air corrodes standard steel hinges in five to seven years. The lower hinge always fails first because it carries the gate’s full weight and sits closest to the ground moisture.
- Heaved post footings on sloped lots. East Port Orchard’s hillside yards drain toward the water, and winter freeze-thaw cycles shift post footings enough to throw older swing gates out of alignment. The latch misses, the gate sags, and the hinges bind.
- Dead operator control boards from the 1990s. Salt-laden condensation gets into the board housing and corrodes terminals over time. The gate stops mid-travel, the keypad goes dark, or the opener hums but won’t move the gate.
- Wood gate rot at ground contact. Fifty-plus inches of rain a year and constant humidity mean wooden gate posts and pickets absorb moisture year-round. The post rots where it enters the footing, and the gate leans even when the hardware is fine.
Pricing for Gate Repair in East Port Orchard, WA
A typical gate realignment in East Port Orchard runs $180 to $320, depending on whether we need to reset the post or just adjust the hinges. Hinge and post repair runs $250 to $500, including the new pressure-treated post and concrete. Weld and rust repair runs $180 to $450 depending on how many joints need grinding and re-welding. An automatic gate operator diagnostic and repair runs $150 to $450 if it’s a board or limit switch, and full operator replacement runs $850 to $1,600 installed. These are the ranges we quote on the phone. They don’t change at the door. Every price is agreed in writing before we touch the gate, and estimates are free. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near East Port Orchard
If you’re just up the hill in Parkwood, down in Port Orchard proper, across the water in Bremerton, or over in Manchester, we cover those areas too. We work throughout East Port Orchard and the surrounding Kitsap communities with the same response time and the same written guarantee.
Serving East Port Orchard, WA - Our Local Coverage Area
We’re based in the East Port Orchard area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in East Port Orchard
Salt-laden marine air off Sinclair Inlet combines with the heavy rainfall East Port Orchard gets all year, and that combination corrodes steel hardware far faster than rain alone. Hinges within a half-mile of the waterline routinely rust completely through in five to seven years, while hinges a mile inland might last ten to fifteen. If you live near the shoreline, use marine-grade stainless or powder-coated aluminum hardware, and check your lower hinges every spring. Call (877) 610-2993 and we’ll inspect yours while we’re there for the quote.
Yes, many 1990s control boards can be repaired or retrofitted. If the board has corrosion at the terminals from years of salt-laden condensation, we can often clean and re-solder the connections, or swap in a compatible aftermarket board for $150 to $450, which saves you the cost of a full operator. If the motor itself is seized or the gearbox is stripped, replacement at $850 to $1,600 installed is the better call. We’ll tell you honestly which one applies to your gate, and the price is set before we start. Call (877) 610-2993 for a free diagnosis.
It’s usually both, and the post is the part most people miss. On sloped lots, freeze-thaw cycles heave the post footing, the post rotates, and the gate sags until it scrapes. If you fix the panel without the post you’ll fix it twice. We reset the post in concrete, replace the hinges if they’re rusted, and realign the gate so it clears the ground with room to spare. This runs $250 to $500 in East Port Orchard. Call (877) 610-2993 for an exact quote.
Yes. Standard galvanized steel hinges and latches rust through in five to seven years that close to the water. We install marine-grade stainless or powder-coated aluminum hardware on shoreline jobs, and it’s the difference between a hinge that lasts fifteen years and one that seizes after five. It costs a little more up front, and it’s the only way we’ll do a shoreline repair. Call (877) 610-2993 and we’ll come look at your gate and give you a written price.
UL 325 requires automatic gates to have entrapment protection: safety edges or photo eyes that reverse the gate if it contacts or senses a person or vehicle, plus a warning placard on the gate. Older East Port Orchard gates from the 1980s and 1990s often have none of this. When we repair an automatic gate, we bring it up to current UL 325 safety requirements, which matters a lot if a grandchild or a dog is in the wrong spot when the gate swings. The update is included in the repair quote. Call (877) 610-2993 and we’ll check your gate’s safety system while we’re there.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving East Port Orchard since 2001.