Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across East Pasadena
Gate repair in East Pasadena usually runs between $180 and $650 depending on whether we’re chasing an electrical fault, cutting out a rusted hinge, or resetting a post that’s drifted out of plumb. Most repairs in the 91107 ZIP are done same-day or next-day, and the quote you get over the phone is the price you’ll see on the invoice. Call Hal at (877) 610-2993 and a real person answers, day or night.
We’ve worked the neighborhoods from Hastings Ranch down to the streets along Sierra Madre Boulevard for years, so we know what the Santa Anas do to a swing gate and what sixty-year-old concrete footings do to an automatic operator. You’re not getting a call center. You’re getting a local crew that shows up when we say we will.
Why Gatewood Fence & Gate Is East Pasadena’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 and he’s still the one standing behind every job. The name is on the shop, the shop’s address is published, and if something isn’t done right, the 90-Day Done Right Promise says we come back and fix it. No runaround, no fine print. That promise goes out in writing on every invoice in East Pasadena.
We answer the phone with a live person 24 hours a day. Not a voicemail. Not a chatbot. When your gate quits at 7 a.m. on a Tuesday and your car is trapped in the driveway, you want a human on the line who can actually send someone. That’s what we do for homeowners across East Pasadena.
Our Gate Repair team works on-site, which matters more than people think. We weld in your driveway rather than hauling your gate off to some shop forty miles away. For East Pasadena’s older iron gates and mid-century post footings, that on-site work means real fixes, not swap-and-hope parts replacement.
We’re insured and bonded, background-checked, and certified to service nine major gate brands including LiftMaster, Viking, FAAC, BFT, and Linear. Dispatch runs from our Los Angeles office, but the crews serving East Pasadena know this area’s gates and the wind that beats on them.
Our Gate Repair Services in East Pasadena
Electric Gate Repair
Electric gate repair in East Pasadena typically runs $180 to $420 when we’re dealing with burned circuit boards, dead capacitors, or photo-eye faults. The foothill wind exposure here means we see more false triggers and overloaded motors than in flatland neighborhoods. We trace the actual fault rather than throwing a new board at the problem and hoping it sticks. If we can fix the board, we fix it. If it’s truly dead, we tell you straight and show you the price before we order.
Automatic Gate Repair
Automatic gate repair in East Pasadena runs $250 to $700 depending on whether we’re replacing a swing arm operator, repairing a slide gate rack and pinion, or rewiring a control box that’s been baked by years of foothill sun. The Hastings Ranch concentration of early-2000s operator installs means we regularly find motors hitting torque limits because the posts underneath them have shifted, not because the motor itself is tired. That’s the local knowledge that saves you money.
Hinge & Post Repair
Hinge and post repair in East Pasadena runs $150 to $550. A gate sags in the hinge post, not in the middle, and that’s where we start. The 1950s poured-concrete footings all through Hastings Ranch have gone through sixty-plus years of seismic micro-movement and seasonal soil expansion. We dig down, reset the post plumb, and re-weld or re-anchor the hinges so the gate closes square. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gate realignment in East Pasadena runs $120 to $350 when the post is still sound but the gate itself has dropped or shifted. Winter atmospheric-river rains saturate the soil around old footings, then summer heat dries it out. That heave-and-settle cycle pulls gates out of alignment gradually, season after season. We re-shim hinges, adjust latch strikes, and get your gate closing clean without slamming or binding.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in East Pasadena
We service Viking, FAAC, BFT, and Linear operators regularly across East Pasadena, along with LiftMaster and the rest of the major names. We keep common parts stocked for these brands so a repair doesn’t turn into a three-day wait for a shipped component. If we don’t have the board or arm on the truck, we can usually have it in hand by the next morning and be back at your gate before the week slips away.
Common Gate Repair Problems We See in East Pasadena Homes
- Santa Ana wind damage to swing gates. East Pasadena sits at the base of the San Gabriel Mountains, and when the Santa Anas channel down the mountain front, unlatched swing gates get slammed hard. Hinge pins shear, weld points crack, and operators burn out fighting the load. A wind latch or a proper positive stop would prevent half of what we see in this ZIP code.
- Tilted post footings on Hastings Ranch slide gates. Those original 1950s concrete footings under post-mounted operators were poured for a different era. Decades of soil movement have tilted many of them inward just enough to bind a slide gate at the far end. The motor then works against that bind until it overheats or trips. Looks like an electrical failure. It’s usually structural.
- Corrosion at weld points on older ornamental ironwork. The Craftsman and Spanish Colonial Revival homes near the Pasadena border have beautiful hand-forged gates that are now 70 to 90 years old. Long dry stretches followed by heavy winter rain creates a rust cycle that eats through weld joints first. We grind them back, re-weld properly, and coat them so they’ll hold up through another few decades.
- Photo-eye false triggers during wind events. Foothill winds shift gates and branches enough that photo-eyes read movement and reverse mid-cycle. In East Pasadena, we see this far more than in Arcadia or San Marino. Sometimes it’s a simple re-aim. Sometimes the gate has shifted enough that the whole frame needs realignment before the sensors will behave.
Pricing for Gate Repair in East Pasadena, CA
Here’s what we actually charge in East Pasadena right now. A basic gate realignment runs $120 to $350. Hinge repair and post reset work lands at $150 to $550 depending on how deep we have to dig and whether we’re re-pouring concrete. Electric gate repair is $180 to $420 for board-level fixes and wiring work. Full automatic operator replacement, when a motor genuinely is beyond saving, runs $450 to $700 for the operator plus labor.
Every price is quoted and agreed before any work starts. Not an estimate that might drift. A number you approve. We offer $40 off any repair over $200, no trip charge anywhere in the county, and a free second opinion on any written estimate from another company. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we’ll give you a real number over the phone.
We Also Serve Cities Near East Pasadena
Our Gate Repair in East Pasadena service covers the full 91107 ZIP, and we regularly run calls to Sierra Madre, San Marino, Pasadena, and Arcadia. The wind patterns and housing stock change street by street out here, but we work the whole stretch of the San Gabriel foothills.
Serving East Pasadena, CA - Our Local Coverage Area
We’re based in the East Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in East Pasadena
East Pasadena’s 91107 ZIP sits at the base of the San Gabriel Mountains, and Santa Ana events channel down the mountain front directly into these neighborhoods. That means unlatched swing gates get slammed repeatedly, shearing hinge pins and overloading operator motors far faster than in flatland areas like Arcadia or San Marino. Add in the 1950s post footings that have shifted over decades, and you get motors working against structural binds that flatland gates never face. Call (877) 610-2993 and we’ll diagnose what’s actually happening at your gate.
In East Pasadena, especially around Hastings Ranch, that far-end bind is usually a tilted gate-post footing, not a motor problem. The original 1950s poured-concrete footings have shifted through decades of seismic micro-movement and soil expansion, tilting posts inward by just enough to pinch a cantilever slide gate at the far end. That bind can triple the motor’s working load. We reset the post, realign the rack and pinion, and the motor usually returns to normal without replacement. Estimates are free at (877) 610-2993.
Yes. The hand-forged ironwork on Craftsman and Spanish Colonial Revival homes near the Pasadena core boundary is now 70 to 90 years old, and the weld points are where they fail. Long dry stretches followed by heavy winter rain create a corrosion cycle that eats through those joints first. We grind back the rust, re-weld on-site, and coat the repair so it holds. We’d rather save an original gate than replace it with something stamped out this decade.
Santa Ana winds in East Pasadena push gates and nearby branches around enough that photo-eyes read the movement as an obstruction and reverse mid-cycle. Sometimes it’s a simple re-aim of the sensors. More often, the gate itself has shifted enough over years of seasonal soil movement that the eyes are no longer aligned with each other, and the whole frame needs realignment before the sensors stop false-triggering. We’ll sort it out, and you’ll get the price before any work starts.
For East Pasadena’s hillside driveways and long runs off the mountain front, we usually recommend a slide gate with a heavy-duty linear operator if you have the lateral room for it. Slide operators handle wind loads better than swing arms on this terrain. If the gate has to swing, then a properly sized arm with a solid positive stop and a wind latch matters more than the brand name. We’ll measure your gate, look at the wind exposure, and give you a written recommendation with no pressure and no trip charge inside the county.
Get Your Gate Fixed Right the First Time
If your gate is sagging, binding, or not opening at all, call Hal’s team at (877) 610-2993. Free estimates over the phone, upfront pricing in writing before any work starts, and a 90-Day Done Right Promise on every job. You’ll talk to a real person, not a queue. We’ve been fixing gates across East Pasadena for a long time now, and we plan on being here a long time more.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving East Pasadena since 2001.