Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Duncanville
Gate repair in Duncanville usually means one of two things: a gate that won’t open, or a gate that won’t stay put. Most jobs we see in Duncanville run $180-$650 depending on the post, the operator, and the frame. Hal Gatewood has been fixing gates since 2001, and he’ll tell you straight: the soil under Duncanville does more damage to gates than any motor or hinge ever will. Call (877) 610-2993 and a live person answers. No voicemail, no call center.
Why Gatewood Fence & Gate Is Duncanville’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop and on every invoice. That sounds old-fashioned, and it is. It’s also the reason homeowners around Duncanville, Merriwood, and Fairmeadow call us when a gate starts misbehaving. We show up in a clean truck, in uniform, and we fix the gate in your driveway instead of hauling it off to some shop across the county. Our Gate Repair crew welds on site, which matters when a hinge post has moved several inches and a replacement part alone won’t cut it.
Duncanville customers talk to the same person who answers the phone when the job starts, and the same person again if anything isn’t right. The 90-Day Done Right Promise is written on every job, not buried in fine print. If it’s not done right, we come back and make it right. One call. No runaround. We also background-check everyone who steps onto a Duncanville property. Seniors and veterans get a permanent 10% discount, and $40 comes off any repair over $200. No haggling required.
Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Duncanville locally. That means when you call at 6 a.m. because your gate won’t close, you’re not waiting for someone to drive up from Austin.
Our Gate Repair Services in Duncanville
Electric Gate Repair
Electric gate operators in Duncanville’s older homes often date back to the 1980s and early 1990s. Control boards burn out when force-loaded against a gate that clay soil has racked out of square. We service LiftMaster, FAAC, BFT, Linear, and Viking operators, and we stock common boards and receivers locally so we’re not waiting on a parts truck before we can start. A typical electric gate repair in Duncanville runs $240-$520, depending on whether the board, the receiver, or the limit switch has gone.
Automatic Gate Repair
Automatic gate repair in Duncanville often involves retrofitting older openers with modern safety photocells and loop detectors. Many of the operators we find in homes built between 1965 and 1985 were installed before UL 325 entrapment standards existed. In Duncanville, automatic gate repair typically costs $280-$600. We quote the full price up front, before any work begins, and you approve it before we touch a thing.
Hinge & Post Repair
This is where Duncanville’s Blackland Prairie clay earns its reputation. The soil expands when it rains and shrinks when it bakes, and a 40-year-old hinge post set in a shallow concrete footing will slowly walk out of plumb. In the Merriwood and Fairmeadow neighborhoods, we routinely find posts that have migrated four or more inches from where they were set. Hinge & post repair in Duncanville runs $200-$700 depending on whether the post needs re-setting with a deeper bell footing or just re-welding at the hinge. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A gate sags in the hinge post, not in the middle. Gate realignment in Duncanville means we pull the gate, check the post with a level, and re-hang the frame square rather than just cranking on the hinge bolts. When clay soil distortion is the culprit, we re-set the post before re-hanging. Gate realignment in Duncanville typically costs $185-$480. If the frame is so distorted that no amount of realignment will hold, we’ll tell you that too, and we’ll show you why replacing the gate frame is cheaper than patching it every spring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Duncanville
We’re certified to service nine major gate brands, and on Duncanville jobs we see a lot of FAAC and Linear operators still running from the original build, plus some BFT and Viking units on newer installations. We keep common FAAC and Linear boards, receivers, and photocell kits on the truck for Duncanville calls, which means we can often finish the repair in one trip instead of two. For an older operator that can’t be retrofitted safely, we’ll lay out your replacement options in plain English and give you a written quote before moving forward.
Common Gate Repair Problems We See in Duncanville Homes
- Posts that have “walked” out of position. Blackland Prairie clay swells with winter rain and shrinks in summer drought. A post set too shallow migrates a little every year, and after 40 years the latch gap is gone. Re-setting the post in a deeper bell footing is the actual fix.
- Welds sheared by soil pressure. When the ground moves, the gate frame moves with it. Older wrought-iron driveway gates in Duncanville’s 75116, 75137, and 75138 zip codes crack at the welded joints because the frame can’t flex with the post. We weld on site, so the gate never leaves your driveway.
- Rot and warp in original wooden swing gates. Dallas-Fort Worth heat bakes cedar and pine boards until they crack, then spring rains soak what’s left. The sag that follows bends the hinge post itself, and new boards alone won’t fix a bowed post.
- Obsolete operators without safety sensors. We find plenty of early automatic gate openers around Duncanville that were installed before photocells and loop detectors became standard. The board burns out from repeated force-loading against a misaligned gate. Retrofitting safety sensors is usually possible, and we’ll tell you honestly when it isn’t.
Pricing for Gate Repair in Duncanville, TX
Duncanville gate repair prices are set by the job, not by the truck. A hinge and post repair typically runs $200-$700. Electric gate repair runs $240-$520. Gate realignment runs $185-$480. Full operator replacement with new safety sensors starts around $650 and goes up from there depending on the brand and the gate’s size. Every price is quoted and agreed before any work starts, in writing. There’s no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate. Hal will tell you what’s worth fixing and what isn’t, and he’ll put it on paper.
| Service | Typical Duncanville Price Range |
|---|---|
| Hinge & Post Repair | $200 - $700 |
| Electric Gate Repair | $240 - $520 |
| Gate Realignment | $185 - $480 |
| Full Operator Replacement | $650+ |
We Also Serve Cities Near Duncanville
Gatewood Fence & Gate serves Duncanville and the surrounding communities, including DeSoto, Glenn Heights, Lancaster, and Dallas. If your gate is giving you trouble and you’re anywhere in the area, call (877) 610-2993 and we’ll get you on the schedule.
Serving Duncanville, TX - Our Local Coverage Area
We’re based in the Duncanville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Duncanville
Because the post itself has moved. Duncanville sits on Blackland Prairie clay, which swells and shrinks so aggressively that posts set in shallow footings migrate several inches over a few decades. Replacing hinges on a post that’s out of plumb does nothing. The post has to come out and be re-set in a deeper concrete bell footing before the gate can be re-hung square. Call (877) 610-2993 and we’ll tell you exactly what’s going on before we touch anything.
Usually, yes. Older FAAC, Linear, BFT, and Viking operators can often be fitted with current safety photocells and loop detectors, even if they were installed before UL 325 standards took effect. We’ll assess the board, the wiring, and the gate’s alignment during the estimate and tell you if retrofitting makes sense. In some cases, a new operator costs less than trying to modernize a 40-year-old board. We’ll show you the numbers and let you decide.
It depends on the post, not the boards. If the hinge post has stayed plumb and only the boards have rotted or warped, new boards are a straightforward fix. But in Duncanville, a sagging gate usually means the post itself has moved, and new boards on a leaning post will sag again within a year or two. We’ll check the post first, then tell you honestly whether to repair or replace the whole gate. Estimates are free.
A loop detector senses when a vehicle is sitting on or approaching the driveway and prevents the gate from closing on it. If your gate has ever started closing while your car was still moving through, that’s the part that’s either missing or failed. On older automatic gates in Duncanville, adding a loop detector is one of the most meaningful safety upgrades you can make. We install and service them as part of automatic gate repair.
Repair is usually cheaper when the frame is sound and the post is still plumb. Replacement is the better answer when the frame is so distorted by years of clay-soil movement that no amount of welding and re-hanging will hold. In Duncanville, a post re-set and gate re-hang typically runs $200-$700. A full gate and operator replacement often starts around $1,200 and goes up from there. We’ll give you a written quote for both options and let you choose. Call (877) 610-2993 for a free second opinion on any written estimate you already have.
Call Gatewood Fence & Gate for Duncanville Gate Repair
If your gate won’t open, won’t close, or keeps sagging no matter what you do, call (877) 610-2993. A live person answers around the clock. Hal Gatewood has been fixing gates since 2001, the name is on the shop, and the 90-Day Done Right Promise is in writing. Show me the gate closing on its own and I’ll show you where it’s failing. If it’s in Duncanville, we’ll be there. Estimates are free, and the price is agreed before any work begins.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Duncanville since 2001.