Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cheverly
Gate repair in Cheverly usually runs between $180 and $650 depending on whether we’re freeing a frozen hinge, resetting a heaved post, or diagnosing an operator that quits halfway. Most repairs in the 20710 zip code are finished the same day we arrive. If your gate sags, drags, or won’t stay closed, call (877) 610-2993 and you’ll get a live person who can tell you what to expect before we even roll a truck. Cheverly’s uniformly postwar housing stock means the gate on your lot was probably hung the same decade as your neighbor’s three doors down, and after 70 years of Prince George’s County freeze-thaw cycles, the failure points are remarkably predictable.
Hal Gatewood has repaired gates in Cheverly long enough to know which streets still carry original wrought-iron panels and which ones got builder-grade LiftMasters bolted on a decade ago. We send a crew, not a subcontractor, and the person who quotes the job is the person who does the job.
Why Gatewood Fence & Gate Is Cheverly’s Preferred Gate Repair Company
We have worked on gates along Cheverly Avenue, on the side streets branching off Landover Road, and along the quieter blocks near Crest Avenue and Euclid Avenue. Residents here do not want a rotating cast of strangers. Hal Gatewood’s name is on the shop, the address is published, and there is a license number anyone in Cheverly can look up. That is the oldest accountability there is.
Cheverly homeowners tell us the same thing again and again: a national outfit quoted one price on the phone, then added a trip charge, a “specialty hardware” fee, and a rebuild recommendation at the door. We do not do that. The price is quoted and agreed before any work starts, in writing, and the 90-Day Done Right Promise is stamped on every invoice. If it isn’t done right, one call brings Hal back.
A live person answers our phone 24 hours a day. Not a voicemail, not an automated queue, not a chatbot. When a spring gate stops latching on a Sunday evening in Cheverly, you talk to a person who knows gates.
Our Gate Repair Services in Cheverly
Hinge & Post Repair
In Cheverly, the hinge post is where most gate failures actually live. The original posts set during the 1947-1955 build-out were often placed at depths that predate modern installation codes, and decades of freeze-thaw cycling in Prince George’s County’s clay-heavy soil have heaved many of them out of plumb. We dig out the old footing, set a fresh galvanized post below frost depth, and rehang the gate so it swings true. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A gate sags in the hinge post, not in the middle. That is where we start. On a Cheverly side street built in the early 1950s, our crew was called for a swing gate that sagged badly and no longer latched. The homeowner had a builder-grade operator installed a few years prior, but the gate’s original hinge post had heaved out of plumb over decades of freeze-thaw cycles in the clay. We cut out the rusted hinges, dug a new post footing below frost depth, set a fresh galvanized hinge post, realigned the gate, and reattached the operator with proper safety photocell alignment. The original wrought-iron panel stayed in place, and the gate ran smoothly again.
Weld & Rust Repair
Cheverly’s humid summers take a toll on original wrought-iron. Rust blooms at the picket welds and along the bottom rail, and hinges seize from decades of corrosion. We weld on site, in your driveway, so the gate never leaves your property. Hal has been welding since 2001 and has fixed more rusted Cheverly panels than he can count. If the iron is still sound, we repair it instead of telling you it’s time for a new gate.
Electric & Automatic Gate Repair
Whether your Cheverly driveway gate runs on a FAAC, BFT, Linear, or Viking operator, we diagnose it on site. Many operators in Cheverly fail not because the motor is bad but because the gate they are attached to has shifted. If the post heaves, the arm binds, and the operator burns itself out trying to move a gate that no longer swings free. We fix the gate first, then the operator. That sequence is the difference between a repair that lasts and one that fails again by spring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cheverly
We carry parts and stock common replacement pieces for FAAC, BFT, and Linear operators, which covers a good share of the automatic gates in Cheverly. Crews new to Cheverly often burn out a new Viking or BFT motor trying to force open a gate whose hinges are seized with rust, and then they blame the motor. We do not. We start with the gate, then the opener. And we keep the parts you actually need on the truck, so a second trip is rare.
Common Gate Repair Problems We See in Cheverly Homes
- Builder-grade operators failing early. A cheap opener bolted to an original mid-century hinge post will bind when the post heaves, and the operator quits halfway. In Cheverly, the motor is rarely the first thing to fail.
- Frozen hinges on original wrought-iron gates. After 70 years of wet summers, the original hinges on 1947-1955 gates are often seized solid. New crews yank on the gate, burn out the operator, and call it a motor failure. We cut out the old hinge and weld in a new one.
- Missing conduit for automation. Many Cheverly homeowners want to automate a manual gate, only to find the original build never included the power and conduit runs. We handle the trenching, the conduit, and the operator install, done to current code.
- Springs that sag every year. Freeze-thaw cycling in Cheverly’s clay heaves posts a fraction of an inch each winter. Enough of those cycles and the gate will not latch by April. A proper post footing below frost depth stops the annual sag.
Pricing for Gate Repair in Cheverly, MD
Here are the numbers Cheverly homeowners actually ask about. A hinge and post repair typically runs $280 to $550, depending on whether we are resetting one post or two and whether the old footing needs full removal. Gate realignment on a sagging swing gate runs $180 to $350. Weld and rust repair on an original wrought-iron panel usually lands between $200 and $600, based on how many pickets and rail joints need attention. A full electric gate diagnosis and repair runs $150 to $450 before any major parts replacement. The price is quoted and agreed before any work starts, and there is no trip charge inside the county. We offer $40 off any repair over $200, and seniors and veterans always get 10% off.
If you are comparing written estimates, bring them in. Hal will give you a free second opinion, no charge, no pressure. Show me the gate closing on its own and I’ll show you where it’s failing.
We Also Serve Cities Near Cheverly
We work throughout Prince George’s County, including Gate Repair calls in Bladensburg, College Park, Riverdale Park, and East Riverdale. If you are just outside Cheverly, the same crew and the same 90-Day Done Right Promise apply. Call (877) 610-2993 and a live person will answer.
Serving Cheverly, MD - Our Local Coverage Area
We’re based in the Cheverly area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Cheverly
Yes. That is the most common misdiagnosis we see in Cheverly. The clay soil here freezes and thaws every winter, heaving gate posts a fraction of an inch at a time. After enough cycles, the post is out of plumb and the gate binds mid-swing. The operator stops because it is working against a misaligned gate, not because the motor is shot. We realign the gate first, then test the operator. Call (877) 610-2993 for an exact diagnosis, estimates are free.
You have two real options: run proper conduit and power to the gate, or use a solar operator. In Cheverly, many lots are tree-shaded, and solar operators underperform when they get four hours of filtered light a day. We recommend running a conduit with low-voltage wire underground to the gate, done to current code, with the power supply at the house. The trenching and conduit work is part of what we do. The price is agreed before any work starts.
It can almost always be repaired. The hinges are the failure point, not the panel. We cut out the rusted hinges, weld in new galvanized hinges, and rehang the gate. The original iron, if it is sound, stays. That is the repair-first approach we have used since 2001, and it keeps your Cheverly gate looking like the 1950s original it is. Call (877) 610-2993 for a free estimate.
Yes. In fact, that is most of what we do in Cheverly. The Civic Association and the neighborhood culture push people to keep the mid-century look, and we agree. We repair the original iron, reinforce the hinge posts below grade, and mount the operator so it does not alter the gate’s face. Your gate stays your gate. The automation is hidden or minimal. Call (877) 610-2993 and we will walk it with you.
It means the fix starts at the post, not the panel. In Cheverly’s clay soil, the post has likely heaved out of plumb over decades of freeze-thaw cycles. Straightening or shimming the panel will only last until the next winter. We reset the post at a proper depth below frost line, then rehang the gate. That is the repair that lasts. Call (877) 610-2993 for a quote, no trip charge inside the county.
Call Gatewood Fence & Gate for Gate Repair in Cheverly
If your Cheverly gate sags, drags, freezes, or the operator quits halfway, call (877) 610-2993. A live person answers around the clock. We will quote the work before we start, show up when we say we will, and stand behind the job with the 90-Day Done Right Promise in writing. I will be there myself, or you can drive to the shop and look me in the eye. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cheverly and Prince George’s County since 2001.