Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cartersville
A sagging gate or a dead opener in Cartersville usually comes down to two things: Bartow County’s shifting red clay and operators that were installed during the mid-2000s subdivision boom and have now outlived their service life. Gate repair in Cartersville, GA typically runs $185 to $480 for most hinge, post, and realignment work, while opener replacement on those aging 2000s ornamental gates lands between $650 and $1,400 depending on brand and arm style. We’re Gate Repair specialists who live with these same soil conditions every week, and we’ll give you a straight quote before any work starts. Call (877) 610-2993 and an actual person picks up, day or night.
Why Gatewood Fence & Gate Is Cartersville’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and every invoice. That means when a post heaves out of plumb on a Cartersville horse property, you are not explaining the problem to a phone menu. You are talking to the person who will drive out and look at it. Our crew serves Cartersville directly, with dispatch coordinated from the brand’s Atlanta office. But the work happens here, in your driveway, with on-site welding and a repair-first approach. We do not haul your gate to some shop and leave you staring at an empty opening for two weeks.
There is a reason homeowners off Highway 41 and Highway 20 keep calling us back. Sloppy work bothers Hal. A gate that drags six months after a “repair” bothers him more. Every job carries our 90-Day Done Right Promise in writing. If it is not done right, one phone call brings us back. No runaround, no fine print. Senior and veterans save 10% permanently, and we do not charge a trip fee anywhere inside the county.
Our Gate Repair Services in Cartersville
Electric Gate Repair
Most electric gate failures we see in Cartersville are not mysterious. A 2008-era opener that was spec’d cheap by a production builder finally gives out. Safety photocells get knocked out of alignment and the gate refuses to close. A winter ice event seizes the arm. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If we cannot repair the board or arm, we tell you honestly and show you the replacement cost in writing before anything gets ordered.
Hinge & Post Repair
This is the work that separates a real fix from a temporary patch. In Cartersville, a gate post set in shallow concrete will heave every single year as the red clay swells through wet springs and shrinks in dry summers. Replacing the hinge alone does nothing if the post is moving. We dig it out, set a new footing deep enough to get below the active soil movement zone, add gravel drainage, and re-hang the gate plumb. The fix lasts because the footing addresses the actual problem.
Gate Realignment
A gate that drags at the latch side is almost never a bent gate. Show us a gate sagging in the middle and we will show you a hinge post leaning out of plumb. We realign the frame, adjust hinges, and reset posts where needed. We also true up ornamental pickets after ice storms, because Cartersville catches more freezing events than Atlanta and lightweight aluminum pickets bend when ice loads up on them.
Automatic Gate Repair
Automatic gate repair in Cartersville often means fixing an opener that someone else already “fixed” once. We see jumper wires in control boards, bypassed entrapment sensors, and limit switches cranked to the ragged edge. If a gate closes on a car or a person, the liability is enormous, and a bypassed sensor is a serious safety issue best handled by a trained professional. We test the full safety loop on every automatic gate repair, and we will not leave a gate operational with the entrapment protection defeated.
Lock Repair and Weld & Rust Repair
Lock repair in Cartersville covers everything from keyed entry hardware on pedestrian gates to solenoid locks on automated systems. Weld and rust repair is where Hal genuinely enjoys the work. We do on-site welding, which means a cracked weld on a farm gate or a rusted-through hinge plate gets repaired in your driveway instead of being replaced. The gate stays where it belongs: on your property, keeping your driveway and horses where they belong.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cartersville
We are certified to service nine major gate brands, and we keep common parts stocked locally so a Cartersville repair does not wait on a truck from some regional warehouse. FAAC and BFT hydraulic operators show up regularly on the larger farm and estate gates along Highway 20. Linear and Viking units are more common on the 2000s subdivision swing gates throughout 30120 and 30121. If we do not have the board or arm on the truck, we can usually have it within a day, and we will tell you the exact price before ordering.
Common Gate Repair Problems We See in Cartersville Homes
- Clay-heaved hinge posts. Wet winters and springs in Bartow County swell the red clay, then dry summers shrink it. The post walks out of plumb, the gate sags at the latch side, and no amount of hinge adjustment fixes it until the post footing is redone.
- Mid-2000s opener failures. Subdivisions built along the I-75 corridor in the 2000s often included ornamental iron or aluminum driveway gates as a standard feature. Those openers are now 15-25 years old and failing at roughly the same time across Cartersville.
- Misaligned or bypassed safety sensors. We find entrapment photocells knocked out of position or deliberately bypassed on a surprising number of older automatic gates. This is a genuine safety defect, and we will not leave it that way.
- Rack and pinion wear on slide gates. On shared driveways where multiple households creep the gate open bit by bit, the rack teeth eat themselves over time. The gate starts jerking, then grinding, then stops moving altogether.
Pricing for Gate Repair in Cartersville, GA
Here are straight numbers for the Cartersville market. Hinge and latch adjustments run $185 to $320. A post reset with a new footing costs $350 to $650 depending on post size and how much concrete has to be broken out. Gate realignment after ice damage typically lands between $220 and $400. Electric gate opener replacement runs $650 to $1,400, with the board-only repair on a Linear or Viking unit usually under $300 when the board is still available. Full swing gate re-hang with new hinges and a welded repair lands between $400 and $800. Every quote is agreed before work starts, in writing. Take $40 off any repair over $200, and if you have a written estimate from another company, bring it to us for a free second opinion.
We Also Serve Cities Near Cartersville
Our crews run daily routes through Acworth, Woodstock, Kennesaw, and Holly Springs. If you live just over the county line, the same local crew, same written pricing, and same 90-Day Done Right Promise apply. Call (877) 610-2993 and we will tell you when we can be there.
Serving Cartersville, GA - Our Local Coverage Area
We’re based in the Cartersville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Cartersville
Almost certainly, yes. The red clay in Bartow County swells when wet and shrinks when dry, and a post set in shallow concrete will shift a little every season. The only permanent fix is digging the post out and pouring a new footing deep enough to sit below the active movement zone, with gravel at the base for drainage. That runs $350 to $650 in Cartersville. Call (877) 610-2993 for an exact quote on your post, and we will tell you what depth the soil on your lot actually requires.
Yes. Shared driveway easements on Cartersville’s flag-shaped lots are common, and we plan the work so at least one vehicle access point stays open while we work. We may stage the repair in phases, or set a temporary chain and post if the gate has to come off its hinges for welding. Your neighbor will be able to get in and out. Call (877) 610-2993 and tell us how many households use the gate, and we will plan around it.
A 2008-era opener driving halfway and reversing usually means a failing limit switch, a worn arm, or a badly misaligned safety sensor. On a mid-range residential unit from that era, repair runs $185 to $350. On a builder-grade unit, replacement with a better unit runs $650 to $1,200. We will show you the condition of the board, arm, and sensors, and give you both options with written pricing before any decision. Call (877) 610-2993 and we will come out for a free assessment.
Straightening bent aluminum pickets depends on the alloy and how badly the ice loaded them. Light bends can be carefully worked back to shape on-site. Severe kinks or cracks mean replacing individual pickets, which we can weld in place. The dead operator is typically a seized or burned motor after an ice event, and replacement runs $650 to $1,100 for most Cartersville subdivision gates. Call (877) 610-2993 and we will give you one written quote covering the pickets and the opener together.
The most common problem on sloped slide gates is rack and pinion wear. The gate wants to roll downhill, and the motor fights it every cycle. Over years, the steel rack teeth lose their shape and the gate starts jerking or grinding. We replace the rack section and realign the pinion, and on Cartersville properties with red clay movement, we often find the track brackets have shifted too. A full rack and pinion refresh runs $300 to $600. Call (877) 610-2993 and we will inspect the entire run.
Call Gatewood Fence & Gate for Gate Repair in Cartersville
One of the oldest forms of accountability in the trades is a name on a shop and a shop down the road. Hal Gatewood’s name is on the shop, on every invoice, and on the 90-Day Done Right Promise that goes with every job in Cartersville. We answer the phone with a live person 24 hours a day, and the price we quote is the price you pay, agreed in writing before the first tool comes off the truck. Call (877) 610-2993 for a free estimate on your gate repair in Cartersville, GA.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cartersville since 2001.