Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Carnot-Moon
If your gate isn’t opening, sagging, or has stopped sealing, Gatewood Fence & Gate repairs it in Carnot-Moon. A typical gate repair in Carnot-Moon runs $180 to $480 for most hinge, post, and opener work, and we do on-site welding so the gate never leaves your driveway. Hal Gatewood has been fixing gates since 2001, and our Gate Repair team covers all of 15108, from the residential streets off Beaver Grade Road to the commercial lots along the I-376 corridor. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Carnot-Moon’s Preferred Gate Repair Company
We’re local in the way that matters. Hal Gatewood’s name is on the shop, his address is published, and his license number is there for anyone to check. When you call, you talk to a person who knows gates, not a voicemail tree. Homeowners in Carnot-Moon call us because we show up when we say we will, we quote a price before any work starts, and we stand behind the repair with our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
Our crews know the gates in this area. We see the same post footings heaved by frost, the same obsolete control boards from the 1980s, the same rusted chain-link hinges on hillside lots. That means we come prepared the first time. And every job comes with the standing offers: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and get a free estimate.
Our Gate Repair Services in Carnot-Moon
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. In Carnot-Moon, the freeze-thaw cycle works on concrete-set posts every year. Frost heave pushes the footing a fraction of an inch, the post leans, and the gate starts dragging on the latch side. We dig down, reset the post in proper concrete, weld reinforcing plates where the stress cracked the steel, and recalibrate the operator so the gate closes fully again. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gates on sloped driveways, which is most of Moon Township’s hillside lots, shift out of alignment faster than gates on flat ground. The weight of the leaf works against the hinges, and over time the gate lists toward the downhill corner. We realign the gate on site, correct the hinge geometry, and adjust the operator’s travel limits so the gate seals against the driveway instead of stopping short. This matters for security, and it matters for the motor, which has to work harder against a misaligned gate.
Electric Gate Repair
Electric gates around Carnot-Moon fail for two main reasons: old control boards and weather-damaged wiring. Control boards in 1980s-era residential operators go bad and replacement parts are long discontinued. We stock retrofit boards for major brands and can usually get an older system running again if the motor and gearbox are still solid. We service Linear, Viking, Ghost Controls, and DoorKing operators, among others. If the board is fried and the motor is worn out, replacement is often the cheaper answer than throwing parts at a dead system. We’ll tell you straight which one applies.
Automatic Gate Repair
Automatic slide gates along the Parkway West corridor are a repeat repair call for us every late winter. Frost heave shifts the concrete post footings just enough to throw the travel limits out of calibration, and the gate stops an inch short of fully closed. It’s a small problem with a big security consequence, especially on commercial lots where the gate is the first line of access control. We reset the limits, adjust the safety loops, and test the system through a full cycle before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Carnot-Moon
We’re certified to work on nine major gate brands, and we stock parts for Linear, Viking, Ghost Controls, and DoorKing specifically because we see them regularly in Carnot-Moon. That local parts knowledge means shorter turnaround when an older opener needs a new board, a limit switch, or a sensor. Instead of ordering parts blind and hoping, we know what fits what, and we can often complete the repair in a single trip. If your gate operator is from another brand, we service it too.
Common Gate Repair Problems We See in Carnot-Moon Homes
- Frost-heaved post footings. Pittsburgh’s freeze-thaw cycle shifts concrete post footings out of plumb every year. When the post leans, the gate drags, the limits misread, and the operator burns itself out fighting the weight.
- Obsolete control boards. Residential gate openers installed in the 1980s and early 1990s have boards that are no longer manufactured. When those boards fail, the choice is a retrofit board or a full operator replacement, and we’ll give you the real numbers for both.
- Corroded hinge posts on original chain-link gates. Homes built in the 1960s through 1980s often still have their original driveway gates. Water pools at the base of hinge posts after snowmelt, rust eats through the steel, and the gate starts listing or snapping at the weld points.
- Ice-bound slide gates on commercial lots. Along the I-376 corridor, warehouse and rental car compound gates freeze in their tracks after hard winters. Ice forms in the roller track and hinge joints, and the operator’s torque limiter trips instead of pulling the gate closed.
Pricing for Gate Repair in Carnot-Moon, PA
Here’s what gate repair costs in Carnot-Moon, and what drives the price:
- Hinge and post repair: $180 to $400, depending on whether the post needs to be reset in new concrete or just re-welded and realigned.
- Gate realignment: $150 to $300. This includes correcting hinge geometry and recalibrating operator travel limits.
- Electric gate repair: $220 to $520 for control boards, wiring repairs, and limit switch replacement, depending on brand and part availability.
- Automatic gate repair: $200 to $480 for most operator issues, including recalibration and sensor adjustments.
- Weld and rust repair: $150 to $450. We weld on site, so the gate stays in your driveway; you don’t pay transport or shop fees.
Every price is quoted and agreed before we start. No surprises when the invoice comes. Estimates are free, and we’ll give you a second opinion on any written estimate free of charge. Seniors and veterans always get 10% off. Call (877) 610-2993 for a precise quote on your gate.
We Also Serve Cities Near Carnot-Moon
Beyond Carnot-Moon, we cover Gate Repair in Carnot-Moon and the surrounding communities: Coraopolis, Bellevue, Ambridge, and Economy. If you’re in one of those areas, the same local crew, the same on-site welding, and the same 90-Day Done Right Promise apply. Call (877) 610-2993 and we’ll get you scheduled.
Serving Carnot-Moon, PA - Our Local Coverage Area
We’re based in the Carnot-Moon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Carnot-Moon
Frost heave shifts the concrete post footings out of plumb, which throws the operator’s travel limits out of calibration. The gate stops an inch or two short of fully closed, and the safety loop reads that as an obstruction. We reset the post if needed, recalibrate the limits, and test the full cycle. Call (877) 610-2993 and we can have it sealed shut and secure the same day.
Yes, in most cases a 1960s-era ornamental iron gate can be retrofitted with modern safety photocells and a newer operator. The gate itself, if the steel is sound and the hinges are reset, is perfectly rebuildable. We weld on site, so we can reinforce the existing frame rather than scrapping it. If the gate is rusted through at key stress points, we’ll tell you honestly and give you numbers for repair versus replacement. Call (877) 610-2993 for a free evaluation.
If your operator was installed before the mid-1990s, the original control board is likely discontinued. When the board fails, there are no new factory replacements. We can often install a retrofit board that works with the existing motor and gearbox, assuming those are still sound. If the motor is grinding or the gearbox is worn, you’re better off putting that money toward a new operator. We’ll open the housing, check the board’s part number, and give you the real cost for each path before you spend a dollar.
Ice-bound slide gates and recalibrated travel limits. Every late winter, warehouse gates, rental car compound barriers, and hotel shuttle lot gates along the I-376 corridor fail to fully close because frost shifted their post footings or ice seized their roller tracks. It’s a repeatable seasonal pattern, and we see it almost every year. Commercial property managers call us, we thaw and clear the track, reset the limits, and the gate runs clean again. Call (877) 610-2993 to get on the schedule before the next hard freeze.
Yes, and it’s often a smart retrofit. Older chain-link driveway gates on hillside lots, where running line power is expensive or impractical, work well with solar-powered openers. We size the panel and battery to the gate’s weight and duty cycle, and we install the operator with the proper safety sensors. If the existing gate is sagging or binding, we correct that first, because a solar opener on a misaligned gate drains its battery fast. Call (877) 610-2993 for a free estimate on a solar retrofit.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Carnot-Moon and surrounding communities since 2001.