Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Burbank
Gate repair in Burbank typically runs between $140 and $420 for most service calls, with same-day availability for urgent hinge and weld failures. We work all four Burbank ZIP codes: 91521, 91522, 91523, and 91526. Hal Gatewood and his crew have been welding, realigning, and rebuilding gates in Burbank long enough to know which neighborhoods get Santa Ana wind damage and which hillside streets eat hinge posts for breakfast. Call (877) 610-2993 and a live person answers, day or night.
Key Takeaways
- Most Burbank gate repairs run $140-$420; hinge and post rebuilds on hillside properties run higher.
- Summer heat in the San Fernando Valley trips thermal protection on operators, especially west-facing driveways.
- We weld on site, so the gate stays in your driveway instead of going to a shop.
- Every job carries a written 90-Day Done Right Promise. Not fine print.
- No trip charge inside the county, and $40 off any repair over $200.
Why Gatewood Fence & Gate Is Burbank’s Preferred Gate Repair Company
Our Gate Repair team has spent years working Burbank’s hillside streets, studio lots, and post-war ranch homes. We know what a 108°F afternoon does to a gate track north of Glenoaks, and we know what a Santa Ana gust does to a lightweight aluminum swing gate on the valley floor. That is not marketing copy. That is Monday morning.
Hal Gatewood’s name is on the shop, the invoice is itemized, and the price is agreed before any work starts. We do not send a faceless crew from three counties over. The person who shows up is background-checked, uniformed, and answers to the name on the truck. Burbank homeowners between Olive Avenue and the Verdugo foothills have told us the same thing for years: they want a company that answers the phone, shows up in the window promised, and fixes the gate instead of selling a new one. That is exactly how we operate.
We answer calls around the clock. Not a voicemail tree. Not a chatbot. A person. If you call at 2 a.m. because your gate is stuck open and your dog has opinions about escaping, you get Hal or someone on his crew.
Our Gate Repair Services in Burbank
Electric Gate Repair
Electric gate operators in Burbank fail more from heat than from age. When the San Fernando Valley sits over 100°F for a week straight, west-facing driveway operators trip their thermal protection and refuse to cycle. We diagnose the control board, check the capacitor, and test the motor under load before replacing anything. On older DoorKing and Elite units common in Burbank’s rancho neighborhoods, the problem is often a failing limit switch or a transformer that has cooked in the sun.
Automatic Gate Repair
Automatic gates on hillside streets north of Glenoaks deal with steep approach angles and irregular load on the operator. When the gearbox starts grinding or the gate reverses mid-cycle, it is rarely one thing. We trace the problem from the operator arm to the hinge post, checking for thermal expansion, dust-packed rack and pinion, and worn travel stops. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Not one brand. All of them.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. We see post failures all over Burbank, but especially on post-war ranch homes where the original post footings were poured for a wooden fence, not a 300-pound steel gate. When the post shifts, the gate drops, scrapes the driveway, and eventually tears the hinge welds. We excavate around the post, set it in concrete with proper depth for the gate weight, and weld the hinge plates back in alignment. The fix lasts because it addresses the foundation, not just the visible damage.
Gate Realignment
Thermal expansion in Burbank’s summer heat throws tracks and hinges out of alignment every season. Metal expands, the gate binds, and the operator works double-time until it burns out. We re-align slide tracks on narrow driveways, reset cantilever gaps, and adjust hinge spacing to account for how much the steel moves between a 50°F January morning and a 105°F August afternoon. If the gate scrapes or shudders on the track, do not wait until the operator fails.
Weld & Rust Repair
Hal welds on site, in your driveway. Not in some off-site shop while you wait two weeks. If a hinge plate cracked, a post sleeve split, or a decorative picket broke loose, we cut out the bad metal and weld in new. For rust, we grind to clean steel, treat the area, and repaint to match. On gates near the Burbank Wash or any low-lying streets that hold moisture, we recommend stainless fasteners and galvanized reinforcement because the extra humidity and occasional flooding accelerate corrosion.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We are certified to service nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite, which show up constantly on Burbank properties. Because we work these brands daily, we keep the common parts on hand: limit switches, capacitors, photo eye sensors, remote receivers, and hinge kits. That means a Friday afternoon operator failure does not wait until Tuesday for a part to ship. We fix it when we show up.
Common Gate Repair Problems We See in Burbank Homes
- Thermal protection trips on summer afternoons. When Burbank hits 100-110°F, gate operator motors on west-facing driveways overheat and shut down. The fix is often improved ventilation, a higher-rated capacitor, and re-balancing the gate so the motor is not fighting the weight.
- Santa Ana wind damage to aluminum swing gates. Wind funneling through the Verdugo corridors bends lightweight gates and stresses hinge welds. We install wind bracing and heavy-duty hinges on gates that repeatedly fail.
- Undersized post footings on post-war ranch homes. Burbank’s 1940s-1960s homes were built before automatic gates. We open the footing, install a properly sized post, and anchor it deep enough for the gate weight. Anything less fails within a year.
- Narrow driveway clearance forcing slide gate conversions. Many Burbank driveways are too short for a swing gate to clear a car. We convert to slide systems but replace the post footings first. The old footings rarely hold the track and operator weight for long.
Pricing for Gate Repair in Burbank, CA
Here is what we see in Burbank. A hinge and post rebuild on a standard steel gate runs $250-$450, depending on post depth and whether we are working on flat ground or a hillside slope. Gate realignment runs $140-$280. Electric gate operator diagnosis runs $180-$350, including the service call and the troubleshooting. Weld and rust repair starts around $200 and climbs based on how much metal needs replacing. If the gate needs a new operator installed, expect $600-$1,200, with studio-grade options running higher.
The price is quoted and agreed before any work starts. Written. You sign it, we stick to it. No surprise invoice at the door. No “while we were in there” additions. The 90-Day Done Right Promise is stamped in writing on every job: if it is not done right, one call brings us back.
We Also Serve Cities Near Burbank
We work throughout Burbank and the surrounding area, including Universal City, North Hollywood, Glendale, and Valley Village. If you’re close by and the gate is stuck, call and we’ll tell you exactly when we can be there. Dispatch and scheduling are coordinated from our Los Angeles office, and crews serve Burbank locally.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Burbank
Burbank’s summer heat trips thermal protection circuits in gate operators, especially on west-facing driveways that sit in direct afternoon sun. When temperatures reach 100-110°F, the motor overheats and the control board shuts the unit down until it cools. The long-term fix is re-balancing the gate, improving operator ventilation, and sometimes replacing a tired capacitor. If your gate stops cycling on hot afternoons but works fine at night, that is thermal protection engaging. Call (877) 610-2993 and we’ll diagnose it before you buy a new operator you don’t need.
Hillside gates north of Glenoaks in the Burbank Hills deal with steep slopes that put uneven load on the operator, hinge posts, and track. The ground shifts seasonally, thermal expansion moves the steel, and Santa Ana winds hit harder at elevation. We install raked and cantilever systems that account for the slope, and we set posts deeper than we would on flat ground. A valley-floor gate repair will not hold up on Olive Avenue because gravity works differently at a 15% grade.
The hinge post has failed, not the hinges alone. A gate sags when the post pulls or the footing cracks, and that is where the repair starts. We excavate, reset the post with proper-depth concrete, weld the hinge plates back in alignment, and re-hang the gate. If you replace just the hinges without fixing the post, the gate scrapes again in months. In Burbank’s older ranch neighborhoods, undersized post footings are the usual culprit.
Yes. Studio lot gates in Burbank cycle hundreds of times a day and must hold up to UL 325 entrapment protection standards. That means higher-cycle operators, heavier-duty hinges, and more frequent safety photocell verification. Residential gates cycle far fewer times but still need the same safety compliance. Our crew works both. That dual experience matters because a gate that fails on a studio lot shuts down a production, and a gate that fails on a homeowner’s driveway shuts down a family’s day. We treat both with the same urgency, and we know the code requirements for both.
Every twelve months, minimum. But if your gate sits on a dusty hillside or near construction, check it more often. Santa Ana winds pack dust into the rack and pinion, and Burbank’s dry climate means fine sediment works into the photo eye housings and the operator chassis. A failed photo eye is a safety hazard. If the gate reverses on its own, press the test button, or call us and we’ll run the full entrapment protection check while we are there for the tune-up.
Call Gatewood Fence & Gate for Burbank Gate Repair
If your gate is stuck, sagging, scraping, or dead at the operator, call (877) 610-2993. A live person answers. We’ll give you a straight price, a real arrival window, and a written 90-Day Done Right Promise on every job. Hal Gatewood has been fixing gates since 2001, and his name is on the shop, on the invoice, and on the work. Free estimates. No trip charge inside the county. $40 off any repair over $200. And a permanent 10% discount for seniors and veterans. Call now.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Burbank since 2001.