Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Benbrook
Gate repair in Benbrook, TX typically runs $180-$480 for hinge and post work, $350-$850 for automatic opener and control board replacement, and $150-$350 for on-site weld and rust repairs. Most jobs in the 76132 ZIP are completed the same day we arrive. Hal Gatewood has been fixing gates since 2001, and the person who answers your call at (877) 610-2993 is the same person who will stand in your driveway and tell you honestly whether that old swing gate is worth saving. When you live off Winscott Road or in one of the 1970s brick ranch neighborhoods, you learn fast which gate problems come back and which fixes actually hold.
Why Gatewood Fence & Gate Is Benbrook’s Preferred Gate Repair Company
Benbrook isn’t just another stop on a route for us. The crews know the difference between a lakefront ornamental iron gate near the coves and a pipe-panel ranch gate off Stevens Drive, because we’ve worked both, often on the same afternoon. When someone in Benbrook calls about a gate that won’t open, the call is answered live by a real person who knows what a FAAC swing arm sounds like when the capacitor has gone bad. No voicemail. No phone tree. Just a voice that says, “Tell me what the gate is doing,” and actually listens.
Our local reputation is built plain: Hal Gatewood’s name is on the shop and on every invoice. That’s not a marketing line. That’s what happens when an owner-operator has been at it for over 29 years and still answers his own phone. Benbrook customers call back because the first repair actually held through a North Texas summer, which is the only review that matters when your post is set in Tarrant County clay. We don’t hide behind a call center in another state. The shop is down the road, and we’d rather you drive over and look Hal in the eye than wonder who’s coming to your property.
Our Gate Repair Services in Benbrook
Electric Gate Repair
When a Benbrook gate operator stops responding after a thunderstorm or just quits on a July afternoon, the problem is almost never the gate itself. It’s the control board, the loop detector, the capacitor, or a connection that’s been corroding in lake humidity for years. We troubleshoot the operator first, meter the board, check the safety edges and photocells, and only replace what’s actually failed. A 1990s LiftMaster or FAAC operator in Benbrook may just need a new limit switch, not a whole new motor. We carry boards and components for most major brands so we’re not telling you to wait a week while something ships from a warehouse.
Automatic Gate Repair
Automatic gates near Benbrook Lake work harder than gates almost anywhere else in Tarrant County. The soil moves, the humidity eats at connections, and the safety loop embedded in a driveway that’s cracked from clay shrinkage stops reading your car. Our God Beyond Doorstep team? No. Our crew resets the logic, re-terminates the loop wire, and verifies the gate reverses against its safety photocell like UL 325 requires. Hal’s been doing this long enough to know that a gate that drifts closed when it should stay open is telling you the operator gearbox is worn, not that the remote battery is dead.
Hinge & Post Repair
The hinge post is where every Benbrook gate succeeds or fails. A gate sags in the post, not in the middle, and if you fix the panel without addressing the post you’ll fix it twice. In Benbrook, the expansive clay heaves and shrinks posts out of plumb season after season, so we dig out the footing, re-set the post in deeper concrete, and weld or bolt the hinge back to solid metal. We repair what’s there before we replace it. That’s the whole point of our Gate Repair approach: fix the gate in your driveway, not haul it off and charge you for a new one.
Gate Realignment
A gate that drags on the latch side, won’t seat in the striker, or swings open on its own after you close it is almost always a gate that’s out of plumb. In Benbrook, the lake-facing properties near Benbrook Lake see posts lean within a few seasons as Army Corps water releases change the soil moisture under the footing. We get the gate level, square the hinges, adjust the latch, and then we tell you why it moved in the first place, because if the post is cracked at the base, realignment alone won’t last.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
We’re certified to work on nine major gate brands, and for Benbrook customers that matters because a Viking from 1998 doesn’t fail the same way a Linear from 2015 does. Hal’s crew services FAAC, BFT, Linear, Viking, LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule operators. We stock common boards, remotes, and safety components locally so we’re not diagnosing a dead BFT at your Benbrook driveway and then ordering parts from three states away. When the brand is no longer made, we tell you that honestly and help you pick a retrofit that matches the gate you already own.
Common Gate Repair Problems We See in Benbrook Homes
- Post heaving near Benbrook Lake. Concrete footings set in the expansive clay along lake-facing streets heave and lean as soil moisture swings with Army Corps water levels. The gate still looks level, but the latch no longer lines up and the hinges bind when you try to swing it.
- Control board failure from humidity and age. Original 1990s and early 2000s automatic gates near the lake show accelerated corrosion on control boards and operator arms. The localized humidity from Benbrook Lake puts moisture inside enclosures that were never sealed for this environment, and boards fail years earlier than inland.
- Rotted bottom hinge posts on 1970s-80s wooden gates. Original wood privacy gates from the brick ranch era rot at the base where standing water sits. The post then cracks its own footing as the clay below shrinks in summer drought, and the whole gate saggs until the latch side drags across the concrete.
- Weld fractures at the rack and pinion mount. Ornamental iron gates on larger lots near Benbrook Lake develop rust pitting along hinge knuckles and operator arms. The pitting concentrates stress, and eventually the weld at the rack mount or the pinion bracket fractures, which is why a gate that “jumps” when it opens is a weld failure waiting to happen.
Pricing for Gate Repair in Benbrook, TX
Here are the numbers we see across Benbrook’s 76132 ZIP, written down so there’s no mystery when we arrive. Hinge and post re-setting typically runs $180-$420 depending on how deep the post is set and whether we’re welding or bolting. Electric gate operator troubleshooting and control board replacement runs $350-$850, with most boards running about $150-$300 for the part itself. On-site weld and rust repair starts around $150 and rarely exceeds $350 unless the gate has multiple failed welds. The price is quoted and agreed before we start any work. No trip charge inside the county, and if you have a written estimate from anyone else, we’ll give you a free second opinion. Call (877) 610-2993 for a no-hassle quote, and seniors and veterans get 10% off permanently.
We Also Serve Cities Near Benbrook
Beyond our work across Benbrook, we take care of gate repairs in White Settlement, Crowley, Fort Worth, and River Oaks. If you’re just outside the 76132 ZIP but still fighting the same clay soil and aging gate hardware, the same crew, the same fixed pricing, and the same 90-Day Done Right Promise apply. Dispatch and scheduling are coordinated from the Dallas-Fort Worth office, but the person who shows up knows the roads.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Benbrook
Gate posts near Benbrook Lake lean faster because the soil under the footing experiences extreme moisture swings that inland properties don’t get. Army Corps water releases raise the local water table, saturating the clay, and then summer drought shrinks it hard. The resulting shrink-swell cycle heaves concrete footings out of plumb within a few seasons, which is why we see lake-facing posts leaning even on gates installed in the 2000s. We re-pour those footings deeper and often use reinforced concrete piers when the soil has already proven it will move. Call (877) 610-2993 and we’ll tell you what’s happening under your specific post.
Most Benbrook ranch gates made of pipe-panel or tube steel can be retrofitted with an automatic opener without replacing the gate, provided the hinge posts are still structurally sound and the gate swings freely. We inspect the welds and the post bases, then match an opener to the gate’s weight and cycle frequency. Some old ranch gates need a new post or a set of new hinge barrels first, but the gate itself is often salvageable. Hal will show you exactly which parts are worn and give you a written price before any work starts.
The answer depends entirely on where the rot and movement actually are. In most 1980s Benbrook wood gates, the bottom hinge post has rotted at ground level while the panel itself is still structurally fine. Resetting that post with a proper concrete footing usually runs $180-$320, which is cheaper than rebuilding a full panel at $400-$700. We always inspect the panel for rot at the hinge screws and the diagonal brace before recommending either route. We fix what needs fixing and don’t sell you a new panel when the old one has years left.
Thunderstorms kill Benbrook automatic gates because lightning-induced voltage surges travel through the low-voltage loop detector wire and the control board’s power supply takes the hit. The board may still have lights but no longer respond to remotes or the keypad. We typically find the transformer failed or the loop detector fried while the motor itself survived. Replacing a loop detector in Benbrook runs about $150-$250, and a control board replacement runs $250-$500 depending on the brand, including the part and installation.
Rust repair on lake-area iron gates starts with grinding back to clean metal, treating the surface with a rust converter, then welding in new stock where the pitting has thinned the metal below structural thickness. We don’t just paint over rust, because it comes back. For Benbrook Lake properties, we often use a heavier primer and a topcoat designed for high-humidity environments, and we knife-grind the repair so the weld blends into the original rail profile. The goal is a gate that looks like it was always solid. Call (877) 610-2993 to have Hal look at yours.
If your gate is leaning, dragging, or won’t open, call Gatewood Fence & Gate at (877) 610-2993. We’ll give you a free estimate, a written price before we start, and a repair that holds. Hal Gatewood has been doing this since 2001, and his name is on the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Benbrook and the surrounding area since 2001.