Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bee Cave
Gate repair in Bee Cave usually means one of three things: a swing gate sagging off its hinges, an automatic opener that quit, or a post that settled out of plumb in the Hill Country clay. Most jobs run $180 to $340 for common opener and hinge repairs, and we can reach most Bee Cave homes the same day you call. If you’re off Bee Cave Parkway or inside Falconhead, we know your streets, your gate styles, and your HOA. Call us at (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Bee Cave’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 and his name is still on every invoice. That matters when a gate company wants to haul your iron off to a shop three towns away. We fix gates in your driveway, weld on site, and stand behind the work with a written 90-Day Done Right Promise. No fine print, no “in most cases.”
Bee Cave is a small city and we treat it that way. Our customers here see the same faces on repeat jobs, and they know our shop publishes its address and license number where anyone can look them up. We are not a rotating cast of subcontractors. The person who answers the phone can tell you exactly what the tech found on yesterday’s job in Ladera, because we’re a small owner-operated crew, not a national brand with a call list.
When a gate fails in Bee Cave, response time actually matters. A stuck-open gate on a long private driveway is not an inconvenience; it’s an open invitation. We coordinate from our Austin office and keep our schedule built around Bee Cave’s west-side zip codes so we’re not making you wait until the end of the week. Most Bee Cave calls get same-day service. Call (877) 610-2993 and tell us what the gate is doing – a live person will talk you through it.
Our Gate Repair Services in Bee Cave
Electric Gate Repair
Electric gate repair in Bee Cave usually comes down to one of two failures: a control board that stopped reading the safety loop, or a motor that burned out fighting a gate that was never aligned right in the first place. We see both constantly in Bee Cave because so many automatic gates were installed during the 2000s construction boom and are now hitting the end of a builder-grade operator’s natural life. We stock parts for Linear, Viking, and Ghost Controls operators so we don’t have to order a board and make you wait a week. Most electric gate repairs on our Gate Repair team’s schedule are finished the same day.
Automatic Gate Repair
Automatic gates in Bee Cave take a beating that gates in flatter parts of Austin don’t. The clay and limestone under your post shifts with every wet-dry cycle, and that movement transfers straight into the operator. A motor that was sized right for a 400-pound gate ten years ago can be fighting 600 pounds of sag today. We adjust, reinforce, and only replace an operator when it’s actually the problem – not when replacing it is the easier invoice.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle – and that is where we start. In Bee Cave, expansive clay pushes posts out of plumb seasonally, and a post that’s off just a half-inch at the base becomes a three-inch sag at the latch end. We reset post footings with additional concrete, replace worn hinge hardware with heavy-gauge weld-on parts, and get the gate swinging true again. We do the welding right in your driveway so the gate never leaves your property.
Gate Realignment
Most sagging gates in Bee Cave don’t need a new panel. They need someone to stop band-aiding the hinge and fix the geometry. We realign swing gates by resetting post plumb, re-hanging with proper standoff, and adjusting the drop rod and catch so the gate closes square and latches clean. Show me the gate closing on its own and I’ll show you where it’s failing – and in Bee Cave, it’s almost always the post, not the panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bee Cave
Hal has certified his crew on nine major gate brands, and the ones we see most in Bee Cave driveways are Linear, Viking, Ghost Controls, and DoorKing. That matters less for the badge and more for the parts shelf. We keep common control boards, remotes, and safety-edge parts on the truck for Bee Cave jobs, which means fewer second trips and less waiting on a distributor. When we do need something specific, we know which local suppliers have it by noon. Most Bee Cave automatic gate repairs wrap up same day.
Common Gate Repair Problems We See in Bee Cave Homes
- Builder-grade operators failing all at once. The homes built in the mid-2000s boom all got entry-level operators, and they’re all wearing out around the same time. If your Builder-grade opener is ten-plus years old and the motor whines but won’t move the gate, that’s the pattern.
- Posts heaving out of plumb. Expansive clay in the 78738 ZIP code swells in wet months and shrinks in dry ones. A gate post set in that soil moves a little every season, and after enough seasons the gate sags hard.
- Missing underground conduit for automation. A lot of Bee Cave gates were installed manual during construction, with no power run pulled to the post. Adding an automatic opener later means a retrofit – or a frustrating solar setup that slows down every December.
- Storm water damage to operators and wiring. Bee Cave sits in a flash-flood corridor where Barton Creek tributaries cross under driveways. Low-spot operators and underground wiring near those crossings take on water after the intense storms that roll off the Edwards Plateau, and we’ve fished more than a few control boards out of waterlogged housings.
Pricing for Gate Repair in Bee Cave, TX
Here’s what Bee Cave homeowners can expect for common repairs. Hinge and post realignment runs $180 to $340 depending on post condition and whether we need to add concrete to the footing. Electric gate repair – control boards, safety loops, receiver cards – runs $220 to $450. Automatic operator replacement, including pulling an HOA approval and swapping in a FAAC or similar, usually lands between $1,200 and $2,800 for the motor and labor, more for long custom gates with dual operators. Weld and rust repair on wrought-iron panels starts around $150 and goes up with the extent of rust cutting and new steel.
What affects cost most in Bee Cave: post condition, gate weight, and whether the HOA needs to review the operator swap before we start. We quote a firm price before any work begins and that’s the number on the invoice. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Bee Cave
We run regular routes through Lakeway, Lago Vista, and Shady Hollow, and we cover Austin’s west side multiple times a week. If you’re in any of those areas and your gate is sagging or the opener quit, call (877) 610-2993. For a full look at what our Gate Repair in Bee Cave customers experience, the page explains our local process, but the short version: we show up, we fix the gate in your driveway, and we stand behind it.
Serving Bee Cave, TX - Our Local Coverage Area
We’re based in the Bee Cave area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Bee Cave
Because Bee Cave’s housing boom ran from roughly 2003 to 2018, and most of those homes got builder-grade automatic operators installed at the same time. Those entry-level motors have a typical service life of eight to twelve years, which means the first wave of replacements is happening now, all across Falconhead, Ladera, Uplands at Bee Cave, and Lake Pointe at once. If your gate is in that age range and the motor grinds or doesn’t respond to the remote, call (877) 610-2993 and we’ll tell you over the phone whether it’s worth repairing or time to replace.
In most Falconhead West and Bee Cave HOA communities, yes, you need architectural-review approval before swapping operator brands or changing the gate’s finish color. The restrictive covenants specify wrought-iron or ornamental steel with particular finish requirements, and skipping the approval can mean a fine even for a legitimate repair. We keep HOA contact sheets and lead time expectations for Bee Cave communities in our workflow, so we pull the approval while we’re already out measuring your gate. That step is baked into our process, not an afterthought.
In Bee Cave, it’s almost never the panel. The gate scrapes because the hinge post has settled out of plumb in the shifting clay, and once the post moves even a half-inch, the entire gate geometry shifts and the latch-end drops. Fix the panel without the post and you’ll fix it twice. We reset the post, add concrete to the footing, and realign the gate so it swings clean – usually in one visit.
Yes, and we do this in Bee Cave all the time, especially in the older sections where homes predate automatic gates or where the builder skipped the opener. The real question is power: if conduit was never run from the house to the gate post, we either trench a new run or, in some cases, install a hardwired transformer off a nearby outdoor circuit. Solar openers work here, but Hill Country shade and winter sun angles make them slower and less reliable than a proper AC run. Call (877) 610-2993 for a free site visit and a firm number.
Bee Cave sits on expansive limestone and clay that swells and shrinks with moisture cycles much more dramatically than the more stable soils in flatter Austin suburbs to the east. Every wet season lifts the soil under your post, every dry spell drops it, and over enough cycles the post migrates off plumb. Austin’s east side has this too, but Bee Cave’s Hill Country geology makes it a year-round issue, which is why we pour deeper footings and use more concrete on posts we reset here. A gate post in Bee Cave needs to be anchored for movement, not just for weight.
Need your gate looked at? Call (877) 610-2993 for a free estimate. Hal or one of his crew will answer, talk through what the gate is doing, and get a time on the calendar that works. The name is on the shop, and the shop is down the road – that is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bee Cave, TX full-time.