Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Atlanta
Gate repair in Atlanta, GA usually costs $185 to $420 for a hinge and post fix, while a full electric gate motor or control board replacement typically runs $650 to $1,400 depending on the operator brand and driveway setup. Most Atlanta homeowners we work with are surprised to learn that the problem was never the gate leaf at all. It was the post underneath it, or the clay the post sits in, or a control board that gave up after twenty Georgia summers and a couple of ice storms. If you’re dealing with a sagging, stuck, or dead gate anywhere from Buckhead to Inman Park, call (877) 610-2993 and we’ll send Hal or a member of his crew straight out to take a look.
Why Gatewood Fence & Gate Is Atlanta’s Preferred Gate Repair Company
Hal Gatewood has been at this since 2001, and his name is on the shop, the truck, and every invoice. That’s the kind of accountability that matters when you’re fifty-two and you’ve already watched a national outfit quote you $900 on the phone and magically find $2,300 worth of “additional work” at the door. We’re locally owned and owner-operated, with a published Atlanta address and license number anybody can check. When you call Gate Repair at Gatewood, you get a live person. Not a voicemail. Not a phone tree. Hal answers around the clock, seven days a week, because broken gates don’t wait for business hours and neither should you.
The reviews from Atlanta homeowners tell the same story over and over: the person who shows up is the person whose name is on the company. Hal’s crew is background-checked, uniformed, and certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. We weld on site, in your driveway, and every job carries the 90-Day Done Right Promise in writing. If it’s not right, we come back. No runaround, no fine print, no “that’s not covered.”
Our Gate Repair Services in Atlanta
Most of what we do in Atlanta falls into two buckets: fixing what’s broken and fixing what was wrong from the day it was installed. Here are the repairs we handle most often in this city.
Electric Gate Repair
Electric gate repair is our bread and butter in Atlanta, especially in older neighborhoods where gates were retrofitted onto columns that were never built to carry a motor. We service every major brand you’re likely to find in the metro area, and we carry common control boards, photo eyes, and receiver parts in the truck for Viking, Ghost Controls, DoorKing, and Elite operators. A gate that opens on its own, won’t close, or beeps three times and does nothing is almost always a sensor, board, or limit switch issue, and we repair rather than replace whenever it makes sense.
Gate Realignment
Gate realignment is the repair Atlanta homeowners call for most, and the reason is sitting right under your feet. Red Georgia clay expands when it’s wet and contracts when it’s dry, which means your hinge posts are slowly moving through the seasons. The gate sags because the post has gone out of plumb, not because the gate leaf suddenly got heavier. We re-set posts in concrete footings that extend past the clay layer, then re-align the gate so it doesn’t bind on the latch side. Fix the panel without the post and you’ll fix it twice. We tell every customer that up front.
Hinge & Post Repair
Hinge and post repair in Atlanta is structural work more often than it is mechanical work. Those early-1900s Craftsman and Victorian homes in Inman Park and Grant Park often have gates hung on original brick or stacked-stone columns that were never engineered to hold an automated gate. After years of torque and clay-driven soil movement, the post cracks, the hinges pull out, or the whole assembly starts leaning. We repair cracked posts with structural steel, re-bed loose hinges, and weld broken hinge barrels on site so the gate stays in your driveway instead of getting hauled off. Show me the gate closing on its own and I’ll show you where it’s failing.
Lock Repair
Gate locks fail in two ways in Atlanta: moisture intrusion and brute force. With about fifty inches of annual rainfall, lock cylinders and maglocks corrode faster here than in drier climates. We replace worn mechanical gate locks, install or repair maglocks on access-controlled gates, and key everything to match your existing hardware. If your gate drags on the latch post because the post itself has moved, we address that too. A new lock on a leaning post is just another future service call.
Weld & Rust Repair
We weld on site. That sentence matters, because a lot of companies don’t. When a tree limb comes down during an Atlanta summer thunderstorm and bends your gate frame, or when rust eats through the bottom rail of an older wrought-iron gate in Buckhead, we can cut out the damaged section and weld in new steel right in your driveway. No hauling the gate back to some shop across town. No convincing you to replace a gate that can be repaired for a third of the cost.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Atlanta
Hal is certified to service nine major gate brands, and around Atlanta we see a heavy concentration of DoorKing, Viking, and Elite operators, particularly in the Buckhead estates built out from roughly 1997 to 2007. That’s not a coincidence. We stock common parts for those brands in the truck so we’re not waiting on a distributor while your gate sits open half the night. If you’ve got an older Ghost Controls unit or a FAAC arm on a slide gate, we handle those too, and we’ll tell you honestly when a board is failing versus when the whole operator is at the end of its life.
Common Gate Repair Problems We See in Atlanta Homes
These are the failures we see repeatedly in Atlanta. If one of them sounds familiar, don’t wait until the gate quits completely.
- Posts out of plumb from red clay soil movement. The clay expands when wet and shrinks when dry, and over time the post either leans or sinks. Simple hinge tightening cannot fix this; the post has to be re-set in a footing that goes past the clay layer.
- Failing control boards on late-1990s and early-2000s automated gates. In Buckhead’s 30305 ZIP, so many high-end swing gates were installed in a short window that their control boards are now burning out almost simultaneously. A full drive-system replacement is often the honest answer here.
- Ice storm damage to openers and keypads. Atlanta’s ice storms arrive without the gradual freeze cycles that northern cities prepare for. The result is frozen circuit boards, jammed rack-and-pinion drives, and keypads that deliver nothing but a dead beep in February.
- Bent frames and struck gate arms from storm-fallen limbs. Atlanta is one of the most tree-canopied major cities in the country, and a summer thunderstorm can drop a limb straight onto your gate. We see more crash-style damage in June through August than any other time of year.
Pricing for Gate Repair in Atlanta, GA
Here’s what you can expect to pay in the Atlanta market. A hinge repair or simple realignment runs $185 to $420. A replacement gate opener motor or control board runs $650 to $1,400 depending on the brand and whether you need a full drive system. Post replacement with a proper concrete footing runs $450 to $900, and weld repair on a bent or rusted frame runs $200 to $550 depending on the extent of the damage. Those are honest ranges. We quote every price before any work starts, in writing, and that price doesn’t change when the crew shows up. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate on your specific gate.
We Also Serve Cities Near Atlanta
Our gate repair coverage extends to the neighborhoods and communities right around Atlanta, including Druid Hills, North Decatur, Gresham Park, and North Druid Hills. If you live in one of these areas, you’re close enough for the same fast response and the same local pricing. Call and ask for Hal, and he’ll confirm service for your address on the spot.
Serving Atlanta, GA - Our Local Coverage Area
We’re based in the Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Atlanta
Your gate goes out of alignment every few months because the hinge post is moving in Atlanta’s red clay soil, which expands when wet and shrinks when dry. This seasonal cycle slowly pushes the post out of plumb, and no amount of hinge tightening can hold it. The fix is re-setting the post in a concrete footing that extends past the clay layer, then re-aligning the gate. Call (877) 610-2993 and we’ll tell you if your post is the problem without charging you a trip fee inside the county.
Yes, we retrofit older automated gates with current UL 325 compliant photo eyes, edge sensors, and entrapment protection. That’s a common request in Buckhead’s 30305 area, where many gates were installed in the late 1990s and early 2000s before modern safety standards were widespread. The retrofit is usually straightforward on DoorKing, Viking, and Elite operators, and we’ll match the replacement sensors to your existing control board during Gate Repair in Atlanta service calls.
Yes, ice damage to gate openers is far too common in Atlanta, because our ice storms hit fast and hard without the gradual freeze cycles that northern equipment is engineered for. Operators not rated for ice loading get overwhelmed, circuit boards freeze, and rack and pinion slide gates jam. The fix starts with getting the board and arm thawed and diagnosed, then deciding whether the operator is worth saving or whether a modern ice-rated unit makes more sense. Call (877) 610-2993 for a free estimate.
Repair is usually the cheaper answer when the frame is bent but not cracked through. We weld on site, and most bent wrought-iron or steel gate frames in Atlanta can be straightened and reinforced for $200 to $550. If the frame is cracked or the post snapped, replacement often makes more sense. We’ll give you both prices in writing and let you decide. The estimate is free either way.
It sags because the brick column was never built to carry a motorized gate. Those original brick and stacked-stone columns on early-1900s Craftsman and Victorian homes in Inman Park and Grant Park are beautiful, but they weren’t engineered for the torque load of an automated gate. We reinforce the column with structural steel, re-bed the hinges, and re-align the gate so it doesn’t drag. The repair is frankly structural, and it lasts. Call (877) 610-2993 and Hal will walk you through it.
Call Gatewood Fence & Gate for Atlanta Gate Repair You Can Count On
When you call (877) 610-2993, a live person answers. That person can schedule your Atlanta gate repair, answer your questions, and put you on the schedule for a time that actually works for you. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, we make it right. Hal Gatewood has been fixing gates since 2001, and he’ll be the one who shows up, welds the repair in your driveway, and stands behind it. That’s the oldest kind of accountability there is: the name is on the shop, and the shop is down the road. Call today for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Atlanta since 2001.