Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Alpharetta
Gate repair in Alpharetta typically runs $220-$480 for common fixes like hinge replacement or realignment, while full operator swaps on community monument gates run $2,400-$6,800 depending on the brand and access control. Most repairs in Alpharetta are completed same-day or next-day because we keep trucks stocked with parts for the operators these neighborhoods actually use. If your gate is sagging, stuck, or refusing to close, call (877) 610-2993 and you’ll get Hal or a member of his crew on the line, not a phone tree.
We’ve worked on gates in Windward, St. Ives, Crooked Creek, and the smaller enclaves off Kimball Bridge Road and Webb Bridge Road long enough to know what fails and why. Alpharetta’s clay does something to gate posts that you don’t see in Roswell or Johns Creek at the same scale. More on that below. The short version: we fix the gate in your driveway, we weld on site, and we put our 90-Day Done Right Promise in writing before we leave.
Why Gatewood Fence & Gate Is Alpharetta’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is still on the truck, the invoices, and the shop door. That matters in Alpharetta because most of the gate work here flows through HOA boards and property managers who want a vendor with a published address and a license number anyone can verify. We’re that vendor. When the aesthetics committee in your community wants to know who’s touching the monument gate, they can look us up and find a real person, not a holding company.
Alpharetta homeowners regularly tell us the same story: a national outfit quoted one price over the phone and showed up with a different number. We don’t do that. The price we quote is the price you pay, and it’s agreed before any work starts. If you get a written estimate from another company, bring it to us and we’ll give you a free second opinion. No trip charge inside Fulton County. No haggle. And if you’re a senior or veteran, take 10% off permanently.
Response time to Alpharetta is fast because we keep crew members staged in the area. Calls are answered by a live person 24 hours a day, seven days a week. Not a voicemail, not a call center three states away. Someone picks up, asks what the gate is doing, and tells you when we’ll be there.
Our Gate Repair Services in Alpharetta
We don’t haul your gate off to a shop unless it’s absolutely necessary. Hal welds on site, in your driveway or at the community entrance, because that’s how you fix a gate properly without the cost and delay of a flatbed. Here’s what we handle most in Alpharetta:
Electric Gate Repair
Alpharetta’s master-planned communities run on electric gate operators installed mostly between 1997 and 2008. That means capacitors, control boards, and limit switches are reaching the end of their life. We diagnose the operator in place, tell you honestly whether the board can be repaired or the whole operator needs swapping, and give you a written price before we touch a wire. Electrical work on a gate operator involves line voltage and moving steel, and it’s not a weekend project. Call someone who does this every day.
Automatic Gate Repair
Automatic gates in Alpharetta fail in predictable patterns: gear stripping after winter ice events, sensor faults from loop detector wiring that’s degraded in the wet clay, and remote receivers that stop pairing. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate opens but won’t close, or closes and then reverses for no reason, call us. The fix is usually simple, and we’ll tell you the truth about what’s wrong rather than selling you a part you don’t need.
Hinge & Post Repair
Here’s what we see in Alpharetta more than anywhere else we work: hinge posts pulled out of plumb by the red clay. The soil expands and contracts through wet-dry cycles, and over five or ten years a heavy swing gate leaf gradually torques the post out of true. The gate sags, the latch misses, the operator strains, and eventually something binds or snaps. We re-plumb the post with a deeper footing, weld the hinge back to solid metal, and set the gate so it closes the way it did when it was new.
Gate Realignment
Sagging gates in Alpharetta are rarely a panel problem. The panel is fine. The post moved. We start at the hinge post, because that’s where the issue lives. Fix the panel without the post and you’ll fix it twice. Realignment usually means re-setting the post in a deeper pier, shimming the hinges, and re-balancing the leaf so the operator isn’t fighting gravity on every cycle. If the gate closes on its own power without a push, we’ve done it right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alpharetta
We’re certified to service nine major gate brands, and the ones we see most in Alpharetta’s subdivisions are Viking, DoorKing, and Elite. The older Apollo 1500 and 3000 units in Windward and St. Ives are still common, and we know them well. We stock parts locally, so when your community’s monument gate goes down on a Friday afternoon, we’re not waiting on a shipment from a warehouse in Texas to get it running again.
Common Gate Repair Problems We See in Alpharetta Homes
- Red clay heaving posts out of plumb. The Georgia Piedmont’s expansive clay shifts dramatically with seasonal moisture. We re-plumb hinge posts in Alpharetta more often than in any neighboring city we serve, and this is the number-one cause of sagging single-family driveway gates in the 30004 and 30005 ZIP codes.
- Winter ice overloading operators and loop detectors. When freezing rain coats a swing gate arm or a slide gate track, the operator suddenly has to move twice its designed weight. Gears strip, boards burn out, and loop detector wiring in the ground can suffer. We see this spike every January and February.
- Obsolete Apollo and early LiftMaster control boards failing. The 1997-2008 install wave in Alpharetta’s HOA communities is hitting end-of-life all at once. Replacement boards for Apollo 1500/3000 units are scarce, and we often recommend a brand-matched LiftMaster SL3000 swap to keep the community’s aesthetic committee happy.
- HOA-mandated brand matching on monument gates. When a community’s entry gate needs a new operator, the HOA usually requires the replacement to match the existing monument design. That means coordinating with the aesthetics committee, submitting specs, and scheduling work around community access hours. We handle that paperwork and phone tag so the board doesn’t have to.
Pricing for Gate Repair in Alpharetta, GA
Straight numbers, because that’s what people want. Hinge and post repair in Alpharetta typically runs $280-$520 depending on whether we’re re-setting one post or both. Gate realignment runs $220-$400. Electric gate repair like a bad capacitor or limit switch is usually $180-$340. Full operator replacement on a single-family swing gate runs $1,800-$3,400; a dual-lane community slide gate operator swap runs $2,400-$6,800 installed. Weld and rust repair starts around $150 for small patch work. Every quote is given in writing and agreed before any work starts. Remember: $40 off any repair over $200, free second opinion on any written estimate, no trip charge inside the county, and 10% off for seniors and veterans. Call (877) 610-2993 for your exact price.
We Also Serve Cities Near Alpharetta
Our Gate Repair team covers the surrounding north Fulton and south Forsyth area, including Milton, Johns Creek, Roswell, and Peachtree Corners. If you’re in one of those cities and your gate is giving you trouble, the same crew that works in Alpharetta will come to you. For everything about our service in this city, see Gate Repair in Alpharetta.
Serving Alpharetta, GA - Our Local Coverage Area
We’re based in the Alpharetta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Alpharetta
Alpharetta sits on the Georgia Piedmont, where red clay expands and contracts aggressively through wet and dry seasons. Over years, this movement gradually shoves gate posts out of plumb, and the weight of a wrought-iron swing leaf accelerates the lean. It’s a chronic issue here, more so than in cities built on harder soil, which is why we re-plumb more posts in Alpharetta than anywhere else. The fix is a deeper footing and a properly braced post, and it’s usually done in a day. Call (877) 610-2993 for a free estimate.
Most Apollo 1500 units in Alpharetta are now beyond worthwhile repair because control boards and gear assemblies are no longer manufactured. We can sometimes salvage a unit with a rebuilt board, but we’ll tell you honestly when a brand-matched replacement like a LiftMaster SL3000 is the cheaper long-term answer. If your HOA requires brand matching to preserve the monument’s look, we’ll coordinate with the aesthetics committee and handle the paperwork. Call us and we’ll assess your specific operator at no charge.
Yes. Alpharetta’s HOA-governed communities almost always require aesthetics committee approval before a monument gate operator is replaced, and some require the replacement to match the original brand and finish. We’ve done this process dozens of times in Alpharetta’s subdivisions, and we know what the committees ask for. We’ll prepare the spec sheet, submit it on your behalf, and schedule the swap around community access needs.
Ice adds sudden, uneven weight to gate arms, tracks, and hinges. The operator’s gear train, sized for the gate’s normal load, strips or burns out trying to move it. Loop detector wiring in the ground also suffers when saturated clay freezes and shifts. We see a predictable wave of stripped gears, dead boards, and scrambled sensors in Alpharetta every January and February. If your gate failed after an ice event, call (877) 610-2993 and we’ll tell you what actually broke.
Almost always cheaper to repair, because the leaf isn’t the problem. The hinge post moved, or the hinge itself wore out. In Alpharetta, we re-plumb posts and replace hinges for $280-$520, while a new powder-coated aluminum or steel leaf runs $2,000-$5,000 installed. If the post is sound and the metal isn’t rusted through, repair wins every time. Call us for an honest assessment, and we’ll tell you if the leaf is even worth keeping.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alpharetta since 2001.