Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Youngstown
Gate hardware in Youngstown takes a beating from Lake Erie snow and road salt, and most of the gates we see were hung back when Johnson was in office. If your post is heaving out of the ground or your hinges have seized shut, we can weld it in your driveway instead of hauling it to some shop. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood still answers the phone himself. Call (877) 610-2993 and you’ll get a straight answer, not a menu.
We work all over Youngstown, from the brick bungalow streets east of Wick Park to the old steelworker doubles down toward Campbell. Most calls get a same-day or next-day visit, and the price is quoted and agreed before we ever strike an arc.
Why Gatewood Fence & Gate Is Youngstown’s Preferred Gate Parts & Welding Company
Youngstown homeowners have been burned enough by contractors who quote low on the phone and jack it up at the door. Hal Gatewood’s name is on the shop and on every invoice. He’s been fixing gates since 2001, and he has a published address and license number anyone can look up. If you want to drive over and look him in the eye, you can.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back, no runaround. That promise matters in Youngstown, where a gate that sags back into the driveway two weeks after a repair isn’t just annoying, it means the post wasn’t set right in the first place. We don’t leave work like that behind us.
Our Gate Parts & Welding team does the work on site. The gate stays in your driveway. We don’t haul it off to a welding shop across the county and bring it back a week later. For Youngstown’s older homes, that matters, because every day a gate is missing is a day the dog gets out or the backyard is open to the alley.
Our Gate Parts & Welding Services in Youngstown
Hinge Replacement
Hinges on Youngstown’s older gates tend to be original, which means 60 or 70 years of rust and road salt have done their work. A seized hinge is the first thing to bind when a gate starts dragging. We cut the old leaf off, weld a new one on, and get the gate swinging true. If the post is still plumb, hinge replacement runs $140 to $260 per hinge in Youngstown, including the weld.
Post Replacement
This is the big one in Youngstown. Lake Erie freeze-thaw cycles heave steel posts straight out of the ground. We see it every winter: a homeowner calls about a sagging gate, and the real problem is a post that’s tilted six inches off plumb. Digging out the old footing, pouring a new one below frost line, and setting a new post typically runs $380 to $700 in Youngstown, depending on soil and the size of the post. We won’t weld a perfectly good hinge onto a post that’s moving.
Rail Repair
Rails on chain-link gates get bent when the gate is forced, and the steel used on 1950s chain-link gates wasn’t always the straightest to begin with. We straighten what’s worth straightening and replace what isn’t. Most rail repairs on Youngstown residential gates run $120 to $240. If the rail is rotted through from salt, replacement is almost always cheaper than trying to weld rust.
Custom Welding
Wrought-iron gates from the 1940s and 50s have ornamental work that big-box stores don’t stock. Scrolls, finials, latch plates, hinge leaves, whatever broke, we fabricate and weld on site. Custom welding in Youngstown runs $90 to $150 per hour, and most small ornamental repairs are an hour or two. You’ll get a written quote before we start, and it won’t change at the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Youngstown
We service and stock parts for the operators you find on Youngstown gates: Ghost Controls, Viking, and DoorKing. We also work on older Elite units that are still chugging along. If you have a legacy operator from before UL 325 safety standards, we can tell you honestly whether it’s worth retrofitting or whether a new control board and photocells are the cheaper path. We keep common parts in the truck, which means most Youngstown jobs don’t wait on shipping.
Common Gate Parts & Welding Problems We See in Youngstown Homes
- Frost-jacked hinge posts. Decades of Lake Erie freeze-thaw cycles push steel posts up and out of the ground. The gate tilts at the post, not in the middle, and no amount of hinge adjustment fixes that. The post has to come out and get a new footing below frost line.
- Corrosion-seized hinges and latches. Road salt doesn’t just eat car fenders in Youngstown. It works its way into hinge barrels and latch mechanisms and seizes them solid. If the gate won’t close cleanly or the latch won’t throw, that’s usually salt corrosion, and the fix is usually a new hinge leaf welded on, not a can of spray lube.
- Obsolete operator control boards. Commercial chain-link gates from the 1960s often still have their original pre-UL 325 control boards. Replacement parts have been discontinued for decades. We can retrofit a modern Ghost Controls or Viking board with proper entrapment protection, and it’s almost always less than half the cost of a full gate replacement.
- Gates on long-vacant Land Bank parcels. When a Mahoning County Land Bank property changes hands, the gate has often been sitting untouched for 10 to 20 years. No lubrication, no adjustments, posts heaved far out of plumb. We budget for post replacement on these jobs because hinge repair alone won’t bring the gate back.
Pricing for Gate Parts & Welding in Youngstown, OH
Here’s what you can expect to pay in Youngstown. Hinge replacement runs $140 to $260 per hinge. Post replacement runs $380 to $700, depending on post size and how deep we have to dig. Rail repair runs $120 to $240. Custom welding is billed by the hour at $90 to $150, and most repairs are done in one or two hours. Every quote is written and agreed before any work starts. No trip charge inside Mahoning County. Youngstown homeowners also get $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we’ll give you a firm number over the phone.
We Also Serve Cities Near Youngstown
Our crews run service calls to Boardman, Austintown, Struthers, and Campbell every week. If you’re just outside the Youngstown line, give us a call and we’ll tell you when we can get there.
Serving Youngstown, OH - Our Local Coverage Area
We’re based in the Youngstown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Youngstown
It depends on the post, not the gate. Wrought-iron gates from the 1950s are usually worth saving, provided the post footing isn’t completely heaved out. If the post is still plumb and the iron isn’t rusted through, we can weld new hinges and a fresh latch and have it working again. If the post has shifted, we’ll replace the post, then weld the gate back onto it. On a Land Bank rehab in the 44507 ZIP, our crew replaced a badly tilted hinge post on a 1950s wrought-iron swing gate that hadn’t been lubricated in over a decade. The original footing had cracked apart from repeated freeze-thaw cycles, so we poured a new footing, welded a new hinge leaf, and installed a Ghost Controls solar opener. The gate went back to plumb and operational for the new owners. Call (877) 610-2993 and we’ll tell you honestly whether the post or the whole gate is the issue. Estimates are free.
Yes, and we’ll be straight with you about what that means. A pre-UL 325 operator from the 1960s has no entrapment protection, and no legitimate company is going to leave it like that. We can retrofit a modern control board with safety photocells and an auto-reverse function, which brings the operator up to code for far less than a full replacement. We will not disable or bypass safety features to keep an old board running. Call (877) 610-2993 for an honest assessment of your existing operator.
Because the old footing wasn’t poured below frost line. Youngstown sits in the Lake Erie snow belt, and the freeze-thaw cycles here are aggressive. Water gets under the footing, freezes, expands, and pushes the post up a little more each year. If a previous repair just re-set the post in the old hole or poured a shallow footing, it will heave again the next winter. We pour footings below the local frost line, which in Mahoning County means at least 36 inches. That’s the only way to stop the cycle. Call (877) 610-2993 and we’ll look at what’s under that post.
Yes. Chain-link slide gates from the 1950s and 60s often have solid steel frames that are absolutely worth saving. We can weld new brackets, install a modern Ghost Controls or Viking operator, and add safety photocells and an auto-reverse edge. The retrofit usually runs from $1,100 to $1,800 in Youngstown, depending on the length of the gate and whether we need to run new power. The old rail and frame stay put. Call (877) 610-2993 for a written quote.
We do. The neighborhoods around Wick Park, Crandall Park, and the north side are full of brick bungalows with original ornamental iron gates from the 1940s and 50s. Scrollwork breaks, hinge leaves fatigue, latch plates crack. We fabricate replacement pieces and weld them on site, matching the original style as closely as the steel allows. Most ornamental repairs run $180 to $350. Call (877) 610-2993 and describe what broke, and we’ll tell you if it’s a weld fix or if the piece needs to be replaced.
If your gate post is leaning, your hinges are seized, or you just want a straight answer about what it’ll cost to make the gate work again, call Gatewood Fence & Gate at (877) 610-2993. The estimate is free, and the person who answers is someone who actually fixes gates for a living.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Youngstown since 2001.