Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Westchester
Most gate problems in Westchester aren’t the panel. They’re the hinge post, the weld at the scroll joint, or the rack that’s been chewing itself up since the last hurricane season. A hinge replacement on a mid-century CBS home off Bird Road typically runs $220-$380, and post replacement with code-compliant anchorage usually lands between $450 and $900 depending on footing depth. We come to your driveway, weld on site, and leave the gate on its hinges. Call (877) 610-2993 and Hal or his crew will answer.
Nobody rips out a Cuban-style reja and swaps in a generic aluminum panel when the real fix is a rusted hinge pin. In Westchester, these gates are part of the house. We treat them that way.
Why Gatewood Fence & Gate Is Westchester’s Preferred Gate Parts & Welding Company
Westchester homeowners call us because the name on the shop is the same name on the invoice. Hal Gatewood has been owner-operated since 2001, with a published address and license number anyone can look up. That’s a different kind of accountability than you get from a company that spends more on radio ads than on weld rod. When we say we’ll be there in the window we promised, we mean it. And when we’re done, the 90-Day Done Right Promise is in writing on your receipt.
We answer the phone with a live person, 24 hours a day, 7 days a week. Not a voicemail. Not a queue. A person who knows gates. Westchester is dense with wrought iron and older automatic operators, and we’ve worked on enough of them to know that a gate sagging on SW 8th Street is usually failing at the hinge post, not in the middle of the panel. Our Gate Parts & Welding team handles the repair in your driveway, not at some shop across town.
We don’t do trip charges inside Miami-Dade County, and we’ll match any written estimate you’ve already got with a free second opinion. Seniors and veterans get a permanent 10% discount. That’s not a coupon. That’s just how we price.
Our Gate Parts & Welding Services in Westchester
Hinge Replacement
Westchester’s salt-laden air works on hinge pins like a slow acid. A gate that still looks fine from the street can have a pin that’s pitted to half its original diameter. We replace hinges with heavier-gauge steel or stainless options where the exposure is worst, then realign the leaf so the operator isn’t fighting a bind. On a typical Westchester ranch home, hinge replacement with alignment runs $220-$380.
Post Replacement
This is the big one in Westchester. Those 1950s-70s concrete block homes were poured long before post-Hurricane Andrew wind-load standards existed. A rusted hinge post can’t just be pulled and swapped. Miami-Dade requires structural anchorage that meets current code before a permit on a motorized gate closes. We cut out the corroded post, pour a deeper footing with epoxy-set anchors into the block, and weld in a new steel post with gussets. Post replacement here typically lands between $450 and $900, depending on whether we’re dealing with a single swing post or a slide gate track post.
Rail Repair
On slide gates, the rail is where the abuse concentrates. Salt air pits the track, wheels wear flat spots, and the gate starts to chatter or stall. We straighten or replace rail sections, swap in fresh roller wheels, and set the track so the gate rolls without fighting its own motor. In neighborhoods like Coral Terrace and Flagami, where lots are tighter and slide gates are common, a rail repair with rollers usually runs $300-$600.
Custom Welding
The rejas in Westchester are ornamental, and homeowners want the scrollwork to look like it always did. Hal welds on site, matching the existing decorative patterns as closely as the original steel allows. We repair cracked scroll joints, rebuild broken picket tips, and reinforce corners that have loosened over decades of daily sun and storm cycles. Custom welding work starts around $180 and is quoted before any arc is struck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westchester
We stock parts and service operators from Viking, FAAC, BFT, and Linear, among the usual nine brands we’re certified on. That matters in Westchester because older automatic gates here are often a mix: a Viking operator mounted on a reja welded in the 1980s, with a photocell that’s seen twenty summers. We keep common parts for Viking and FAAC on the truck, so most motor and rack repairs are done the same day we show up. We don’t have to order a gear and come back next week.
Common Gate Parts & Welding Problems We See in Westchester Homes
- Salt air pitting on hinge pins and latch bolts: Biscayne Bay sits a few miles east, and the salt rides the humidity straight into your ironwork. Pins corrode from the outside in, the gate binds, and the operator strips its own gears trying to move it.
- UV-baked powder coat on ornamental rejas: That near-daily Westchester sun breaks down finishes faster than people expect. Pinholes form, rust starts inside the tube, and the decorative scroll welds crack under their own weight.
- Pre-2000 operators missing post-Andrew anchorage: A motor swap on an old slide gate often turns into a full post and footing upgrade because Miami-Dade won’t sign the permit until the structural anchorage is code-compliant. We see this at least once a month.
- Rack and pinion wear on slide gates: The rack on a slide gate takes constant friction, salt, and grit. Eventually the teeth get sharp, the pinion chatters, and the gate sits stuck halfway across the driveway.
Pricing for Gate Parts & Welding in Westchester, FL
In Westchester, a hinge replacement runs $220-$380. Post replacement is $450-$900, and the spread reflects whether we’re anchoring into a 1950s block wall or a 1970s CBS beam, plus the footing depth Miami-Dade wants to see. Rail repair with rollers is $300-$600. Custom welding starts around $180. Full operator replacements with code-compliant anchorage run $1,200-$2,800 depending on brand and gate weight.
Here’s how we quote: we walk the gate with you, point at the hinge post or the rack or the weld that’s failing, and put the number in writing. You agree to it before we start. If the permit side of the job adds scope, we tell you before the new scope begins. Call (877) 610-2993 for a free estimate, and remember that $40 off any repair over $200 is standing. It doesn’t need a coupon code.
We Also Serve Cities Near Westchester
Gatewood Fence & Gate covers the neighborhoods around Gate Parts & Welding in Westchester, including Flagami, West Miami, Coral Terrace, and Fountainebleau. If your gate is on the line between two of them, call us and we’ll sort out which side the post is on. Same phone, same 90-Day Done Right Promise.
Serving Westchester, FL - Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Westchester
The panel isn’t the problem. The hinge post is leaning or the hinge pins themselves are worn enough that the gate drops. On Westchester’s CBS ranch homes, the original posts were often set in shallow footings that settle over decades. We straighten or replace the post, reset the hinges, and the gate hangs true again. If we find a cracked weld at the post base, that’s a field repair we can do on site. Call (877) 610-2993 and we’ll tell you what your post actually needs.
Yes, if the gate is motorized and the repair touches the operator, post, or structural anchorage, Miami-Dade wants a permit on it. Older Westchester installs often lack post-Andrew structural anchorage, so a simple motor swap can trigger a required footing and post upgrade before the permit closes. We handle that process directly. The repair itself gets scheduled first, and the paper follows.
Surface rust sits on top and can be sanded to clean metal. Structural rust eats through from the inside, especially at weld joints and the bottoms of hollow pickets where water collects. If you tap a rusted joint with a hammer and it crumbles rather than rings, the steel is compromised. We’ll probe the worst spots during a free estimate. Call (877) 610-2993 and we’ll come look before anything gets worse.
Yes. Hal welds with the gate in place, matching the scroll radius and picket spacing so the repaired joint follows the original pattern. The weld gets ground smooth and primed, and we can match the paint or powder finish closely enough that from the street it reads as original. This is the kind of work we do most often in Westchester, where rejas aren’t just gates. They’re part of the house.
Usually the rack. Salt and grit wear the teeth on the rack until the pinion gear skips, which is the chattering sound. Sometimes it’s both: a badly worn rack will tear up a new pinion within months. We inspect both, replace the rack if the teeth are sharp or missing, and set the pinion engagement so the gate rolls clean. Call (877) 610-2993 and we’ll come check it before you burn out a motor.
Call Gatewood Fence & Gate for Gate Parts & Welding in Westchester
We’re local, owner-operated, and the phone rings to a live person any hour of the day or night. If your Westchester gate is sagging, rusting, or stuck, call (877) 610-2993. Free estimates. Upfront pricing. The 90-Day Done Right Promise in writing. And if you want to see the shop, the address is published and the coffee’s usually on.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Westchester since 2001.