Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Westchase
Gate Installation - Westchase almost always starts with one call to the HOA, not to a gate company. If you live in the 33626 ZIP, your community’s architectural review board wants to approve the material, the finish, and often the placement of the operator before anyone touches a hinge post. Gatewood Fence & Gate has been handling that paperwork and doing the on-site welding since 2001. We bench-weld what we can and weld in your driveway what we can’t, and we match powder-coat to your community’s existing palette so the work isn’t flagged. Hal Gatewood runs this shop, and if you want to talk through what your HOA is asking for before you call them back, call (877) 610-2993. A live person answers, day or night.
Why Gatewood Fence & Gate Is Westchase’s Preferred Gate Parts & Welding Company
Westchase has dozens of sub-neighborhoods, and each one has its own gated entry with Gate Access Control in Westchase, its own management company, and its own idea of what “matching the community standard” means. We know the difference between what the Radcliffe HOA accepts versus what passes at the West Park Village entrance, because we’ve filed the spec sheets and done the welds. When we show up to quote a hinge replacement or a post replacement, we already know the finish color, we know what documentation the HOA will ask for, and we carry a camera to document the footing condition before and after. That’s the part most crews skip, and it’s the part that gets homeowners a stop-work notice on a Tuesday afternoon.
Every job carries the 90-Day Done Right Promise in writing. If the weld cracks or the hinge post shifts once we’re gone, one call brings Hal back to make it right. No runaround, no “that’s not covered,” no phone tree. You call, he comes. The address is published and the license number is there for anyone to look up. This is not a company that disappears after the invoice.
For Westchase homeowners we stock the wear parts that fail on 1990s operators: hinge barrels, tension pins, rack segments, and board-level components for Westchase Gate Motor & Opener Elite and Linear units where they’re still available. That means a repair crew isn’t waiting on a parts truck from Miami. We carry it in the van that comes to Westchase.
Our Gate Parts & Welding Services in Westchase
We don’t swap gates that can be fixed. When a gate sags, a hinge post is leaning, a rail has cracked, or a weld has popped, we repair in place whenever the metal allows it. Here’s what that looks like around Westchase.
Hinge Replacement in Westchase
Hinge replacement in Westchase usually runs between $220 and $480 per hinge, including the barrel, pin, and weld-out. Most of the hinges we see on 1990s-era aluminum swing gates are original, and the ferrous fasteners have been rusting in the salt-heavy humidity for 25 years. We cut the old hinge free, clean the frame, weld the new barrel in with proper fitment, and blend the repair so the HOA review passes on first look.
Post Replacement in Westchase
Post replacement is the one job nobody in Westchase schedules until the gate is dragging. Expect $650 to $1,400 per post depending on footing depth, concrete removal, and whether the footings need to be re-poured and reinforced. Here’s the thing with 1990s gate posts across this community: many were set shallow, in plain concrete, with no coating on the buried section. By the time the gate sags, the post has usually rotated in the footing. A new hinge won’t fix that. We pull the post, set a new one with proper depth and a corrosion wrap, and weld it true.
Rail Repair in Westchase
Cracked or torn rails on swing gates run $180 to $390 to weld and reinforce, depending on the crack length and whether we need to add a gusset plate. Aluminum rail cracks happen where the hinge side meets the frame, and in a hot, wet climate with daily thermal expansion, they get worse fast. We clean the crack, prep the weld zone, and weld in place, then grind and dress the weld so it isn’t visible from six feet away. The HOA never notices, and that’s the point.
Custom Welding in Westchase
Custom welding jobs in Westchase start around $250 for small brackets, stiffeners, and receiver work and go up from there based on linear feet and material thickness. We do this often for gate frames that have been damaged by a car, or for ornamental pickets that snapped and need a clean in-frame replacement. Match the powder-coat, blend the weld profile, and the repair disappears. We’ve done this on enough ornate community entry gates around 33626 that we don’t flinch at scrollwork.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westchase
Most of Westchase’s gate operators came out of the 1990s and early 2000s, and a lot of them are Linear or Elite units. We still stock parts for both where manufacturers still produce them, and when a board is discontinued we know which full-system swaps make sense without ripping out the gate. We also service FAAC and Viking operators, which several of the larger subdivisions have used on slide gates. Our Gate Parts & Welding team maintains inventory specific to what Westchase has in the ground. No three-week parts wait. We come with what’s needed.
Common Gate Parts & Welding Problems We See in Westchase Homes
- Hinge post rotation from shallow 1990s footings. The gate doesn’t sag in the middle; it sags where the post has moved underground. A hinge replacement alone is a band-aid. We document the footing, pull the post, and set it right.
- Lightning-damaged control boards on original Elite and Linear operators. May through September in Westchase, the afternoon thunderstorms are a near-daily event. One surge through an ungrounded or failing loop detector can fry a board. Replacement boards for many 1990s units are discontinued, which forces a full operator swap.
- Seized ferrous fasteners on aluminum frames. The humidity here does not rest. Steel bolts in aluminum hinge plates corrode into a single frozen lump. Getting the old hinge off often means cutting it off rather than unbolting it, and we’re set up for that.
- Cracked aluminum rails from gate impact and thermal stress. A gate clipped by a delivery truck or a teenager with a new license cracks at the hinge-side junction. In Westchase’s heat-and-rain cycle, that crack widens weekly. Weld it before it tears the frame.
Pricing for Gate Parts & Welding in Westchase, FL
Here’s straight pricing for the jobs we do most in Westchase.
- Hinge replacement: $220 - $480 per hinge, welded and color-blended
- Post replacement: $650 - $1,400 per post, including footing work
- Rail repair and reinforcement: $180 - $390 per crack
- Custom welding: $250 and up, quoted per linear foot and material
- Operator component replacement (rack, chain, guide roller): $180 - $520
- Lightning-damaged operator board replacement or full swap: $380 - $1,900, depending on whether a new operator is required
The price we quote is the price on the invoice. We write it down before we start, and we don’t come back with a “we found more” surprise. Hal doesn’t do that. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Westchase
If you’re just outside the 33626 ZIP, we work regularly in Town ‘n’ Country, Citrus Park, Oldsmar, and Safety Harbor. The drive from Westchase to any of these takes minutes, which means a same-day or next-day trip is routine for gate work that’s still in one piece and just needs to be welded properly.
Serving Westchase, FL - Our Local Coverage Area
We’re based in the Westchase area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Westchase
Yes, and you shouldn’t skip it. Most Westchase HOAs require architectural review approval before any structural gate work begins, and hinge and post replacement are both structural. What we do is document the existing gate, match the current finish color and material, and provide the HOA with a spec sheet before work starts. Plan for that approval step; we’ll help you file it. Call (877) 610-2993 and we’ll tell you exactly what your community’s management office is going to ask for.
Because the hinge posts were set in shallow footings 25 to 30 years ago, and most of them have no corrosion coating below grade. The post rotates in the ground, the gate drops, and the hinges get blamed. Replacing only the hinge does not fix a rotating post. We check the footing first, and we’ll tell you honestly if the post needs to come out. Call us to come look before you pay anyone to hang a new hinge on a post that’s already leaning.
Yes, and that’s exactly how it should be done. We weld the crack, grind the weld flush with the surrounding frame, and blend the surface texture before touching up the coating. On powder-coated gates we match the standard color palette the community already approved, so the repair disappears into the rail. You’ll know it’s there because we told you; the neighbors won’t.
Not always. If it’s a unit still in production with a replaceable board, we can likely swap the board and add surge protection for around $300 to $700 total. If it’s an original 1990s Elite or Linear board that’s been discontinued, we can’t buy a new one, and a full operator swap is the honest answer. We don’t sell you a whole new gate; we sell you what the operator actually needs. Call us for a free estimate and we’ll check what you have.
If the footing is documented, the post is set with proper depth, and the new coating matches the community’s approved finish, yes. We shoot photos of the old footing, the new footing before pour, and the final color-matched weld, so your HOA review board has everything they need in one packet. That’s the part that keeps a repair moving in Westchase instead of stalled in architectural review. Call (877) 610-2993 and we’ll walk you through what your committee expects.
Call Gatewood Fence & Gate for Gate Parts & Welding in Westchase
If your gate sags, your hinge post has shifted, or your operator won’t hold up after the last storm, call Hal at (877) 610-2993. You’ll get a real person, a written price before we start, and the 90-Day Done Right Promise in writing when the job’s done. We serve all of Westchase, from the gated entries at the bigger sub-neighborhoods to the estate lots along the golf course side. One call, a real person, and honest work you can look the owner in the eye about. That’s the whole company.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Westchase and the 33626 ZIP since 2001.