Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across West Seneca
If you’ve got a gate that drags on the driveway or a hinge post that’s leaning toward the neighbor’s yard, the problem usually isn’t the latch. It’s what’s underneath. West Seneca’s postwar gates, most of them set in concrete 50 to 70 years ago, have spent decades fighting lake-effect frost that pushes posts out of plumb every few winters. We fix that at the root. Gatewood Fence & Gate handles hinge replacement, post replacement, rail repair, and custom welding across all of West Seneca, and Hal Gatewood has been at this since 2001. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
Why Gatewood Fence & Gate Is West Seneca’s Preferred Gate Parts & Welding Company
We’re not a nationwide outfit with a call center three states away. Our Gate Parts & Welding team is led by Hal Gatewood, whose name is on the shop and on every invoice. When you call about a sagging gate near West Seneca East Senior High or a seized hinge post off Union Road, the person who answers is the person who can tell you what’s wrong before we even show up. We’ve seen West Seneca’s gates in every condition imaginable, and we’re the crew other companies call when a repair job gets too involved.
Every job carries the 90-Day Done Right Promise in writing. Not fine print, not “up to,” not “in most cases.” If it’s not done right, Hal comes back and makes it right. That’s been the deal since 2001. We also answer the phone 24/7, because a gate stuck open at midnight on Indian Church Road is a security problem, not a convenience issue. Seniors and veterans get a permanent 10% discount, and we never charge a trip fee inside Erie County.
Our Gate Parts & Welding Services in West Seneca
Hinge Replacement
West Seneca’s older gates, many of them original to 1960s ranch homes, often have hinges that have seized solid from decades of road salt spray and snowmelt. We don’t just swap the hinge. We check the post it’s bolted to, because if that post has heaved out of plumb, a new hinge won’t fix the drag. Hinge replacement in West Seneca typically runs $145 to $285 per hinge, including realignment. The price is quoted and agreed before we touch anything.
Post Replacement
This is the dominant gate repair in West Seneca, and it’s not close. Chain-link posts set in 24-inch concrete footings during the 1960s building boom are now frost-heaved 2 to 4 inches out of plumb across much of the town. We break out the old footing, set a new galvanized post in a 42-inch-deep hole with gravel drainage at the base, and reset the gate so the latch side doesn’t scrape the lawn. Post replacement in West Seneca typically runs $380 to $690 depending on soil and access. If the post isn’t the problem, we’ll tell you that too. We repair what other companies want to replace.
Rail Repair
Wrought-iron gates welded in the 1960s and 1970s crack at the bottom rail in West Seneca, where road salt and packed snow sit against the steel for four months a year. A cracked bottom rail causes sag, and sag bends the hinge post. We weld the crack on site, in your driveway, so the gate never leaves your property. Rail repair typically runs $165 to $380 in West Seneca depending on the length of the crack and whether we’re adding a stiffener plate.
Custom Welding
Need a bracket welded onto a 1972 wrought-iron gate so a modern operator can open it? We do that on site. Custom welding in West Seneca runs $120 to $240 for most bracket and plate work, and we’ll always tell you honestly whether the steel is worth saving. A gate with deep pitting at the base is often cheaper to replace than to patch, and we won’t pretend otherwise. Our 90-Day Done Right Promise covers every weld we make.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Seneca
We’re certified to service FAAC, BFT, and Linear operators, along with LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in West Seneca because a lot of the 1990s gate operators still running here were installed when these brands dominated the market. We keep common parts on the truck, and when a control board dies after a lake-effect power flicker, we can usually tell you in one phone call whether it’s worth fixing or smarter to retrofit. No runaround, no parts ordered blind.
Common Gate Parts & Welding Problems We See in West Seneca Homes
- Frost-heaved chain-link hinge posts. West Seneca’s frost line reaches 36 to 48 inches, and original posts set in shallow concrete without rebar get pushed out of plumb every few winters. When the latch side digs into the lawn, the fix is a new post, not a new latch.
- Seized hinges on mid-century gates. Road salt spray off Union Road and Seneca Street corrodes hinge pins and barrels. Snowmelt sits in the hinge for months. By spring, the gate won’t swing at all.
- Obsolete control boards from the 1990s. Lake-effect storms bring repeated power flickers that kill old gate operator boards. Many of those boards are no longer made, and retrofitting a modern board to a legacy operator is often cheaper than replacing the whole opener.
- Cracked bottom rails on wrought-iron gates. Salt and snow pack corrode the steel at the base. The crack grows, the rail sags, and the hinge post starts to bend. Addressing it early is a welding job. Waiting can turn it into a post replacement.
Pricing for Gate Parts & Welding in West Seneca, NY
Here’s what you can expect in West Seneca’s market, based on the jobs we do most often:
- Hinge replacement: $145 to $285 per hinge
- Post replacement: $380 to $690 per post, including concrete breakout and new footing
- Rail repair with on-site welding: $165 to $380
- Custom welding for operator brackets and stiffener plates: $120 to $240
- Operator control board retrofit: $210 to $430 depending on brand and board type
What changes the price is what’s under the ground and what’s still salvageable. We always quote the job before we start, and the number we give you is the number on the invoice. We also offer $40 off any repair over $200 and a free second opinion on any written estimate. If another company quoted you a full replacement, bring us the paperwork and we’ll tell you straight whether that’s the right call. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near West Seneca
If you’re in Lackawanna, Buffalo, Cheektowaga, or Depew, we handle gate parts and welding there too. Same crew, same 90-Day Done Right Promise, same live person on the phone. Whether you’re right here in West Seneca or just over the line in Cheektowaga, call (877) 610-2993 and we’ll get you scheduled. Learn more about our work across the region on our West Seneca service area page.
Serving West Seneca, NY - Our Local Coverage Area
We’re based in the West Seneca area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in West Seneca
No. Once a post has heaved out of plumb, the footing underneath it has shifted. Straightening it without resetting the footing just means you’ll be back out there next spring looking at the same lean. West Seneca’s frost line runs 36 to 48 inches deep, and posts set in 24-inch footings from the 1960s can’t hold against that. We break out the old concrete, set a new post at 42 inches with gravel drainage, and the lean stops. Call (877) 610-2993 for a quote.
In West Seneca, it’s almost always the post. The ground freezes and thaws all winter, and that motion pushes the hinge post up and out of plumb. The latch side drops, and the gate drags. We check the post first on every job because fixing the hinge when the post is heaved means fixing the same gate twice. We’ll tell you what we find and quote the repair before we touch anything.
Yes, and we do it on site in West Seneca regularly. The key is checking the gate’s base condition first. If the steel is pitted and thin from road salt, welding can blow through it. In that case we’ll tell you the gate is better off replaced than retrofitted, and we won’t charge you for the honesty. If the steel is sound, we weld the bracket, grind it clean, and prime it. The job carries the 90-Day Done Right Promise like everything else we do.
Sometimes. If the board is still available and the rest of the operator is in decent shape, repairs often run $210 to $430, which is less than a full operator replacement. But if the board is obsolete or the motor has been struggling too, retrofitting a modern board or replacing the operator may be the cheaper long-term call. We’ll inspect it, give you a real number, and let you decide. Call (877) 610-2993 for a free estimate.
We set hinge posts at 42 inches, below West Seneca’s frost line. Anything shallower and the freeze-thaw cycle will heave the post out of plumb within a few winters. The original posts from the 1960s were set in 24-inch footings without rebar, and that’s why so many of them lean today. We also add gravel drainage at the base so snowmelt doesn’t sit against the post and rot the steel at ground level.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Seneca since 2001.