Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across West Falls Church
Gate parts and welding in West Falls Church usually cost between $180 and $850 depending on whether we’re replacing a hinge, resetting a heaved post, or welding a cracked ornamental iron panel back together. Most repairs in the 22042 ZIP are done same-day or next-day, and we quote the full price before any work starts. If your gate sags, binds, or won’t latch, call (877) 610-2993 and Hal Gatewood will talk you through what he’s seeing before we even roll a truck.
We know West Falls Church because we’ve been driving its streets for years. The split-levels off Haycock Road, the capes along Magarity, the townhome clusters near the West Falls Church Metro off Leesburg Pike. Every neighborhood has its own gate problems, and we’ve seen most of them twice. That local knowledge means we show up with the right parts and the right welder the first time, not after two return trips.
Why Gatewood Fence & Gate Is West Falls Church’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is still on the door and every invoice. That matters more in West Falls Church than people realize. This is a community where homeowners ask their neighbors who fixed their fence, and where HOA board members talk to each other across property lines. A company that does sloppy work doesn’t last here long. We’ve lasted because we weld things back together instead of selling replacements nobody needed.
West Falls Church homeowners call us because we answer the phone. A live person picks up 24 hours a day, seven days a week. No voicemail tree, no call center in another state. When a gate won’t close at 9 p.m. on a Tuesday, you get Hal or one of his crew on the line, and we tell you honestly whether it can wait until morning or needs attention now. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back, no runaround.
Our crews wear uniforms and pass background checks. We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. And we don’t subcontract. The person who shows up at your gate in West Falls Church works for Gatewood Fence & Gate.
Our Gate Parts & Welding Services in West Falls Church
Hinge Replacement
Hinge replacement in West Falls Church runs $180 to $320 for a standard ornamental iron or chain-link gate, including the new hinge hardware and labor. In Pimmit Hills especially, we see original cast iron hinges on 1950s gates that have finally snapped after decades of rust and weight. When the hinge fails, the gate hangs on the latch side and drags. We cut out the old hinge, weld in the new one, and get the gate swinging true again. Most hinge jobs take under two hours.
Post Replacement
Post replacement is the big one in West Falls Church, and it typically runs $450 to $850 depending on depth, concrete work, and whether we’re resetting an existing post or setting a new one. Fairfax County’s Piedmont red clay expands when wet and heaves during winter freeze-thaw cycles, pushing concrete-set gate posts out of plumb year after year. Your gate sags in the hinge post, not in the middle. We cut out the old footing, pour deeper, and set the post so it stays square. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Rail repair in West Falls Church runs $200 to $450 for most ornamental iron gates. The top and bottom rails take the brunt of a sagging gate’s weight, and we regularly find cracked welds at the rail-to-picket joints on older Pimmit Hills gates. We weld the crack, reinforce the joint, and often add a gusset plate so it doesn’t re-crack in the same spot. A rail that’s separating is a gate that’s about to drop.
Custom Welding
Custom welding in West Falls Church covers everything from reattaching a broken picket to fabricating a new gate frame to match an existing 1950s design. Custom work runs $150 to $900 depending on scope. We weld on site in your driveway, so your gate never leaves your property. That matters when you’re trying to match an HOA-approved design and don’t want a generic box-store replacement. Our Gate Parts & Welding team has done everything from repairing cracked scrollwork to building complete custom gates that look like they’ve been on the house since 1958.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Falls Church
We’re certified to service nine major gate operator brands, and in West Falls Church we see a lot of FAAC, BFT, and Linear units on the HOA-governed townhome communities near the Metro station. Those automated slide and swing gates need regular maintenance on loop detectors, safety photocells, and keypad controllers. We keep common parts on the truck for these brands, so most automation repairs in the 22042 ZIP are finished in one visit. If your HOA uses a different brand, we service those too, and we’ll order parts and come back as soon as they arrive.
Common Gate Parts & Welding Problems We See in West Falls Church Homes
- Heaved brick pillars in Pimmit Hills. The 1950s brick pillars that hold ornamental iron swing gates are a neighborhood signature, but decades of clay-soil expansion and frost heave have cracked their mortar joints and pushed them out of plumb. When we rehang a gate on a pillar like that, the real job is often resetting the pillar first.
- Binding automated gates near the West Falls Church Metro. HOA-mandated slide gates with loop detectors and safety photocells bind after winter freeze-thaw cycles if the sensors weren’t recalibrated. The operator works fine, but the safety system thinks something’s in the way. We recalibrate and test entrapment protection before we leave.
- Snapped cast iron hinges on cape cods. Sixty-plus years of rust and gate weight eventually snap the original hinges on capes and ranchers around Haycock Road. The gate ends up hanging on the latch side, and if it’s not fixed quickly, the latch post starts leaning too.
- Broken welds on ornamental iron scrollwork. Cracked welds at the picket-to-rail joints are common on older ornamental gates throughout the 22042 corridor. Humid summers accelerate rust at the weld points, and the freeze-thaw cycle finishes the job. We weld the crack and often add reinforcement so it doesn’t return.
Pricing for Gate Parts & Welding in West Falls Church, VA
Here’s what you can expect to pay in West Falls Church, based on what we’ve actually charged in this ZIP code:
- Hinge replacement: $180-$320
- Rail repair: $200-$450
- Post replacement (including concrete work): $450-$850
- Custom welding: $150-$900 depending on scope
- Gate operator service and recalibration: $150-$400
We quote the full price before any work starts, and that price doesn’t change at the door. No trip charge inside Fairfax County, $40 off any repair over $200, and a free second opinion on any written estimate from another company. Seniors and veterans get 10% off permanently. Call (877) 610-2993 for an exact quote. Estimates are free.
We also offer Gate Parts & Welding in West Falls Church across the full 22042 ZIP, and Hal’s dispatch and scheduling are coordinated from the brand’s Washington, DC office, with crews serving West Falls Church locally.
We Also Serve Cities Near West Falls Church
Our crews cover West Falls Church and the surrounding communities, including Falls Church, Woodburn, Seven Corners, and Pimmit Hills. If you’re a few blocks outside the 22042 line, we still take the call. If you can meet us at the gate, we’ll fix it.
Serving West Falls Church, VA - Our Local Coverage Area
We’re based in the West Falls Church area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in West Falls Church
Most HOAs in West Falls Church, particularly in the townhome communities near the Metro station, require architectural committee approval before you change a gate’s style, height, finish, or automation equipment. A straight repair using same-style parts usually doesn’t need approval, but replacing an ornamental iron gate with a different design or adding an automated opener often does. We’ve worked with many West Falls Church HOAs and management companies, and we can provide specification sheets and drawings to submit with your request. Call (877) 610-2993 and we’ll help you figure out what your board needs to see.
Because the problem isn’t the hinge, it’s the post. Pimmit Hills sat on Fairfax County’s Piedmont red clay, which expands with winter moisture and heaves during freeze-thaw cycles. That movement pushes the hinge post out of plumb a little more every year, and no amount of hinge tightening will fix a post that’s drifted off square. We cut out the old footing, pour deeper concrete, reset the post, and only then rehang the gate. Spring sag is a post problem, not a hinge problem.
Usually yes. We weld on site in West Falls Church, and for many ornamental iron repairs, we can weld the crack while the gate stays in place. But if the pillar itself has shifted or the hinge post has rotated, welding the panel without fixing the post is temporary. We’ll tell you honestly which situation you have before we start, and the quoted price covers the full repair, not just the visible crack.
In West Falls Church, we commonly see FAAC, BFT, and Linear operators on HOA-governed automated gates, especially in the townhome communities near the Metro station. We service all three, plus six other major brands. We don’t require you to replace an operator just because it’s not the brand we’d install. If the existing operator is serviceable, we service it. If the board is ready to upgrade, we’ll install the replacement and handle the programming.
Yes. Fairfax County follows national safety standards that require entrapment protection on automated gates, including residential swing gates. That means photo-eyes or an equivalent safety system that reverses the gate if something or someone is in the path. If your existing gate opener lacks working entrapment protection, we can add or recalibrate it. It’s a safety issue first, and a code-compliance issue second. Call (877) 610-2993 and we’ll check your system.
Contact Gatewood Fence & Gate in West Falls Church
If your gate sags, binds, won’t latch, or needs welding, call (877) 610-2993. Hal Gatewood or one of his crew will answer. We’ll quote the price before we start, stand behind the work with the 90-Day Done Right Promise, and show up when we say we will. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Falls Church since 2001.