Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Wells Branch
Gate parts and welding in Wells Branch usually means one of three things: a hinge that’s torn loose, a post that’s leaning, or an old operator that’s given up. In this neighborhood, those problems tend to show up on the same streets at the same time, because most of the gates here went in during the same short building window and they’re all aging together. Hal Gatewood has been fixing gates since 2001 and we work throughout 78728 weekly. If your gate is sagging, dragging, or swinging past the latch, call (877) 610-2993 and we’ll send someone who can weld on site, in your driveway, without hauling your gate across town.
We answer the phone with a live person, 24 hours a day. No voicemail maze, no call center three states away. The person who picks up can talk to you about what’s actually happening with your gate.
Why Gatewood Fence & Gate Is Wells Branch’s Preferred Gate Parts & Welding Company
Most of the gates in Wells Branch were hung between 1985 and 1995, when the community was built out under the Wells Branch Municipal Utility District. That means we see the same original hardware on block after block. A hinge that fails on Wells Port Drive is almost always the same hinge that failed on Racine Drive the week before. We keep that hardware on the truck, so when you call, the part we need is probably already with us.
Our reputation in Wells Branch comes from doing the job in your driveway. We don’t take gates to a shop unless the damage genuinely requires it. Hal has been owner-operated since 2001 and his name is on the shop, the invoices, and the work. If something isn’t right, one call brings him back. That’s the 90-Day Done Right Promise, in writing, on every job.
Response time to Wells Branch is quick. We’re scheduled out of the Austin office just south of you, and our crews run the 78728 area regularly. For a gate that won’t close at all, a safety concern, or a gate stuck open, we treat it as emergency work and get someone moving fast.
Our Gate Parts & Welding Services in Wells Branch
When a gate fails in this area, the problem is usually one of four things. Here’s how we handle each one, with Wells Branch’s specific conditions in mind.
Hinge Replacement
Hinge failure in Wells Branch comes from two directions: old cedar gates with hinge screws stripped out of rotted wood, and steel hinges bent by the slow heave of black clay. We stock heavy-duty replacements that fit the original gate frames from this era, so we’re not jury-rigging a mismatched part. On a gate that’s been sagging for years, we’ll often reinforce the hinge mounting area with a steel bracket welded to the post, so the new hinge has something solid to grab beyond the old screw holes.
Expect to pay $165-$280 for a typical hinge replacement on a Wells Branch wooden gate, including parts and labor, when the post itself is sound.
Post Replacement
A gate sags in the hinge post, not in the middle. In Wells Branch that matters more than anywhere else around, because the original 4×4 posts from the 1980s and 1990s were set in minimal concrete footings. Three decades of Vertisol clay shrink-swell cycles have worked them loose. We remove the old post, dig past the active clay zone, set a new post in a concrete footing sized to resist heave, and weld on a fresh steel post bracket if the gate frame needs it. Most posts on swing gates run $375-$650 including concrete, hardware, and re-hanging the gate.
Rail Repair
The horizontal rails on older Wells Branch gates crack where they meet the hinge side, because that’s where all the weight transfers as the post leans. We replace rotten or split rails, weld new steel support plates where the geometry allows, and square the gate before re-hanging. If the rail failure is caught early, this is a $140-$240 fix and saves the gate. If it’s been dragging for a season, the frame may be too far gone and replacement becomes the cheaper honest answer.
Custom Welding
Sometimes the right fix is a custom piece, not a stock part. We weld on site: hinge post brackets, gate frame reinforcements, slide gate rack repairs, latch plates, and small ornamental fixes. Wells Branch’s HOA expects repairs to match the original look, so we cut and finish custom steel that blends with what’s already there. Custom welding runs $95-$175 per hour depending on the work, and we quote the job before any steel gets cut.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wells Branch
Wells Branch gates run on a mix of original operators from the build-out era and newer replacements. We service FAAC, BFT, Linear, Viking, and five other major brands, which covers nearly every operator installed in this community since the 1980s. The real advantage for Wells Branch customers is that we stock replacement boards, hinges, and latches for the common original hardware in the 78728 corridor. When an obsolete Linear control board fails and there’s no replacement board available, we’ll tell you honestly and quote a full operator swap rather than making promises a dead platform can’t keep.
Common Gate Parts & Welding Problems We See in Wells Branch Homes
- Leaning hinge posts from clay expansion. The black Vertisol clay under Wells Branch shrinks in drought and swells after rain. Over decades, that cycle pushes original 4×4 posts off plumb, and the gate binds at the latch or drags at the free edge. Fixing the panel without resetting the post means you’ll fix it again within a season.
- Obsolete operator control boards. Original LiftMaster and Linear boards from the 1990s are failing in batches now. When the board is no longer manufactured, the honest fix is a full operator replacement, which we quote and schedule rather than promising a same-day repair on a part that doesn’t exist anymore.
- Gate rollers jumping the track after rain. Slide gates between Wells Port Drive and the surrounding courts were installed before current track standards. When clay shifts the post line even an inch, rollers bind and jump. We realign the track or weld fresh rack mounting points to correct the geometry.
- Stripped hinge screws in aged cedar. Cedar gates from the original build-out are now 30 to 40 years old, and the hinge screw holes give out before the wood rots through. We repair with through-bolts or weld-mount steel plates so the new hinge anchors into something structural rather than just a bigger screw in the same worn hole.
Pricing for Gate Parts & Welding in Wells Branch, TX
Here’s what typical gate parts and welding work runs in Wells Branch. Hinge replacement: $165-$280. Post replacement with new concrete footing: $375-$650. Rail repair: $140-$240. Custom welding: $95-$175 per hour. Latch and lock replacement: $85-$190. Slide gate roller and track realignment: $200-$410.
What moves the price within those ranges is mainly footing depth, access, and whether the steel work is a simple bracket or a full custom fabrication. You get a fixed price before any work starts, in writing. That price doesn’t change at the door. We also knock $40 off any repair over $200, and there’s no trip charge anywhere inside Travis County. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we’ll give you a real number over the phone.
We Also Serve Cities Near Wells Branch
Our Gate Parts & Welding team works throughout Pflugerville, Anderson Mill, Jollyville, and Brushy Creek as well. If you’re a few minutes outside 78728, you still get the same live-answer phone, same on-site welding, and the same 90-Day Done Right Promise. For the full picture on what we do in this area, see our Wells Branch page.
Serving Wells Branch, TX - Our Local Coverage Area
We’re based in the Wells Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Wells Branch
The short answer is identical 1985-1995 construction. Wells Branch was platted and built out under one MUD in roughly a ten-year window, so most blocks have the same original cedar gates, the same hinge hardware, and the same shallow post footings. When one gate on the street fails, the neighbors’ gates aren’t far behind. We stock replacement hinges and hardware that match that era’s original fitment, which lets us quote and fix a full route of gates in a single day. If your gate is starting to drag or the hinges are pulling, call (877) 610-2993 before the post goes with it.
In many cases, no, not without replacing the operator. Most original LiftMaster and Linear control boards from the early 1990s don’t support the non-contact safety sensor inputs that current standards require, and those boards haven’t been manufactured in years. The honest fix is a full operator swap to a new unit that accepts photocells and edges natively. We quote that work with a written price before we touch anything, and Hal will walk you through whether a board-level repair is actually possible on your specific unit or whether you’d be spending money on a platform that’s already dead. Call (877) 610-2993 and we’ll tell you the truth even if the answer is “replace it.”
No, and in most Wells Branch cases we save the original gate. The lean almost always comes from the footing, not the gate panel. We pull the old post, dig past the active clay zone, set a new post in a properly sized concrete footing, and weld a fresh steel hinge post bracket if the hinge mounts are worn. The gate usually goes back on the same panel, squared and re-hung. If the panel has cracked rails from years of dragging, we’ll tell you honestly whether rail repair plus post replacement is still the cheaper call or whether the gate frame itself is done. A call to (877) 610-2993 gets you a straight answer.
Heavy rain swells the black clay under the posts, and a swelling soil lifts and tilts the post line by fractions of an inch. That’s enough to shift the track geometry on an older slide gate, causing the rollers to bind or jump. Gates installed in the 1990s often lacked the deeper footings current practice calls for, so the whole post line moves as one unit. The fix is to realign the track or re-anchor the rack and pinion mounts, and in severe cases to reset the posts on a continuous deeper footing. If your slide gate jumped the track this week, call (877) 610-2993 and we’ll get it straightened out.
Generally yes for any change in appearance or material. The Wells Branch MUD’s HOA governance expects repairs and replacements to match the original specifications, including gate style, height, material, and hardware finish. For an in-kind hinge or latch replacement, you’re usually fine. For a full gate replacement or a change in hardware color or design, submit it to the HOA first. Our repair-first approach fits well here, because we’re usually restoring the original gate to the look the HOA already knows rather than introducing something that needs a design review. We’re happy to photograph and document the repair for your records. Call (877) 610-2993 if you have questions about the hardware side of the process.
Call Gatewood Fence & Gate for Gate Parts & Welding in Wells Branch
If your gate is sagging, sticking, or swinging past the latch in Wells Branch, we’re the local shop that welds in your driveway and stands behind the work in writing. Hal Gatewood has been fixing gates since 2001, the phone gets answered by a live person day or night, and the price we quote is the price you pay. Call (877) 610-2993 for a free estimate. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, fixing gates since 2001.