Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Wayland
Gate installation in Wayland and welding usually means one of three things: a hinge post that’s moved, a weld that’s cracked, or hardware that’s simply worn out. We fix all three, often the same day we hear from you. Most jobs run from $145 for a basic hinge replacement to $900+ for a full post reset with custom welding. Hal Gatewood has been doing this work since 2001, and when you call (877) 610-2993, a live person answers. Not a menu, not a callback queue. If your gate in Wayland is binding, sagging, or failing to close properly, you’ll get a straight answer and a real fix.
Why Gatewood Fence & Gate Is Wayland’s Preferred Gate Parts & Welding Company
The short answer is the 90-Day Done Right Promise: every job we do in Wayland carries it in writing. If the weld cracks or the post shifts again within 90 days, one call brings Hal back. No fine print, no “up to” language. The longer answer lives in how we work. We weld on site, in your driveway, so your gate never leaves your property. Wayland homeowners tell us they’ve been burned by outfits that quoted one number and billed another. Our price is quoted and agreed before any work starts, and that’s the number on the invoice.
We’ve worked on gates along Old Connecticut Path, through the neighborhoods near Cochituate, and up and down the residential streets that run toward the Sudbury River. That matters because Wayland soil has a particular habit: it moves. A lot. When a homeowner in Wayland calls about a gate that won’t close, Hal doesn’t start by replacing the operator. He checks the post. In this town, the post is usually the problem. That local knowledge is built into every estimate we write for Wayland.
Our Gate Parts & Welding Services in Wayland
Hinge Replacement
When a gate drags or won’t latch, the hinge is often the first thing to go, especially on older Wayland properties. On an 18th-century colonial with a wooden gate on stone pillars, the original hinges may be hand-forged and simply worn past service. We replace them with properly sized hardware, shim or re-weld the mounting plate, and make sure the gate swings without scraping. A standard hinge replacement in Wayland runs $145 to $260 for most residential gates.
Post Replacement
This is the big one in Wayland, and it’s the work that keeps our Gate Parts & Welding team busy every spring. Gate posts in the low-lying areas near the Sudbury River sit in soil that stays wet through the winter and freezes hard. The frost pushes posts up, sometimes one to two inches in a single season. When that happens, shimming a hinge only buys you a few weeks. The post needs to be excavated, re-set deeper with good drainage, and the gate re-hung. Post replacement and re-setting in Wayland typically runs $400 to $900 depending on depth, access, and whether concrete removal is involved.
Rail Repair
Bottom rails on steel and iron gates rust from the inside out, particularly on Wayland’s river-adjacent properties where ground moisture is higher than in the upland towns. A rail that’s rotted through changes how the whole gate carries its weight, and you’ll see it as a sag in the middle of the panel. We cut out the bad section, weld in new material that matches the profile, and grind it smooth so it looks original. Most rail repairs in Wayland run $220 to $425.
Custom Welding
Wayland has a lot of ornamental iron work, from driveway gates to decorative fence sections, and it’s rarely off-the-shelf. When an ornamental finial snaps off or a picket pulls loose from the rail, we weld it back in place on site. We match the material and the finish as closely as the metal allows. Custom welding for a single repair point starts around $175. If you need a whole section fabricated to match an existing gate, we’ll measure and give you a written price before anything starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wayland
We’re certified to service nine major gate brands, and on Wayland jobs we see a lot of FAAC and BFT gate motors and openers on the higher-end estate gates, and Linear units on many of the mid-century homes that were automated in the 1990s and early 2000s. We keep common replacement parts stocked for these brands, which means a limit switch or a hinge bracket doesn’t have to be special-ordered and delayed. Most parts are in the truck when we arrive in Wayland.
Common Gate Parts & Welding Problems We See in Wayland Homes
- Frost-heaved posts that bind the gate every spring. The low-lying ground near the Sudbury River holds water, and when it freezes, posts lift out of level. The operator strains against the misalignment and faults on its limit switches. The fix is resetting the footer, not adjusting the hardware.
- Rotted wooden posts on older properties. Sat, saturated soil along the flood plain accelerates rot at the base of timber posts. We replace them with pressure-treated or cedar stock and often sleeve the base in gravel to slow the next cycle.
- Settled stone pillars that throw hinges out of line. Many Wayland colonials and estate properties use stone gate pillars. When the pillar settles, even a half inch, the hinge alignment goes with it. Custom welding a new hinge plate or re-setting the gate to the new geometry beats tearing out good stonework.
- Worn rollers on slide gates along busier roads. Slide gates on properties along Route 20 and other main roads see heavy daily cycling. Rollers flatten and the gate starts to bind. Replacing rollers is fast work and usually done in one visit for $160 to $300.
Pricing for Gate Parts & Welding in Wayland, MA
Here’s what you can expect to pay in Wayland for common work. Basic hinge replacement: $145 to $260. Rail repair with welded patch: $220 to $425. Custom welding, single point: $175 to $350. Post re-set with new concrete and re-hanging: $400 to $900. Full post replacement with custom welding to match ornamental work: $650 to $1,200. Several things move the number: access to the post, depth of the existing footer, how much concrete has to be broken out, and whether we’re matching ornamental iron or plain steel. You’ll get the price in writing before we start, and it won’t change at the door. The estimate is free. Call (877) 610-2993 and we’ll schedule a time to look.
We Also Serve Cities Near Wayland
Our gate parts and welding work takes us through Gate Parts & Welding in Wayland and into the surrounding towns. We regularly serve homeowners in Cochituate, Weston, Natick, and Sudbury. If you’re nearby and your gate is giving you trouble, call the same number: (877) 610-2993.
Serving Wayland, MA - Our Local Coverage Area
We’re based in the Wayland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Wayland
The limit switch failure is almost always a symptom, not the disease. In Wayland, the ground heaves when the frost comes out, especially in the low areas near the Sudbury River and around Lake Cochituate. Your hinge post moves an inch or two, the gate leaf binds, and the operator pushes harder and trips the limit switch. The lasting fix is re-setting the post and re-calibrating the operator. We do that work in one visit most of the time. Call (877) 610-2993 and we’ll look at your post before we sell you a new board.
Yes. We weld ornamental iron on site, and we match the existing profile as closely as the material allows. If the gate is a common pattern, we can often source or stock the section. If it’s a one-off design, we’ll fabricate a matching piece in the truck or at the shop and weld it in. Most single-point ornamental welds in Wayland run $175 to $350. You’ll get a written price before we start.
The simplest test is to start the gate closing and step across the beam path. The gate should stop and reverse immediately. If it keeps closing, the photocells are out of alignment, dirty, or dead. On Wayland’s newer estate gates, misaligned photocells are a frequent cause of a gate that refuses to close at all, because the gate access control board thinks something is in the way. We check alignment and output on every service call. If the cell is bad, replacement runs $120 to $220 installed.
Inspect it in April or early May, after the ground has thawed and before the summer heat puts extra load on hinges and operators. That’s when Wayland’s frost heave damage shows itself: posts out of plumb, hinges bound up, operator limits fighting the gate. A spring inspection catches the problem before it becomes a mid-summer gate that won’t close at all. We do free estimates, and if the gate works fine, we’ll tell you that too.
Yes, and this is common work for us in Wayland. The wooden post is seated in or next to the stone pillar, and the ground has settled around both. We excavate the post carefully, preserve the stonework, and set the new post with proper drainage so it doesn’t rot out the same way in five years. When the pillar itself has shifted, we’ll custom weld a hinge plate to re-align the gate to the pillar’s new position instead of taking the stone apart. Pricing depends on access, but expect $500 to $900 for a typical post replacement with preservation of existing stone.
Ready to get the gate working right? Call Hal at (877) 610-2993 for a free estimate. We serve all of Wayland, answer the phone around the clock, and put the 90-Day Done Right Promise on every job in writing. If it’s not done right, we make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wayland since 2001.