Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Vienna
Gate parts and welding in Vienna, VA usually runs $140-$650 for hinge replacements, $400-$1,400 for post replacement with concrete work, and $180-$480 for custom weld repairs. Most jobs in neighborhoods like Vienna Woods, Dunn Loring, and along Maple Avenue are done the same day we show up. If your gate sags, drags, or the operator keeps tripping after an ice storm, call us at (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and the name on the shop is the same name on the invoice.
Why Gatewood Fence & Gate Is Vienna’s Preferred Gate Parts & Welding Company
Vienna homeowners call us because we weld on site. The gate stays in your driveway. The hinges get burned in hot, then dressed and painted before we leave. No hauling your gate to some shop two counties over, no two-week wait while a national outfit orders a panel that half-fits. We cut, fit, and weld to the exact post spacing and rack pitch your gate already has.
We know Vienna’s stock well because we have worked it for years. The 1950s split-levels off Park Street still have their original chain-link or wood gates with manual hardware, and the newer teardown-replacement homes further out in 22182 and 22183 carry ornamental iron and aluminum driveway gates with LiftMaster, Viking, or DoorKing operators tied into intercom systems. Both need a different hand, and we carry parts for both on the truck.
Every job carries our 90-Day Done Right Promise, in writing. If something is not right within 90 days, one call brings us back. No runaround, no arguing about what “covered” means. Hal Gatewood has been at this since 2001 and lives locally, which is the oldest accountability there is: the name is on the shop, and the shop is down the road.
Calls are answered by a live person, 24 hours a day, 7 days a week. Not a voicemail, not a queue. When your gate is stuck open in the middle of a Vienna night, you get a real voice and a real ETA.
Our Gate Parts & Welding Services in Vienna
Hinge Replacement
Hinge replacement in Vienna runs $140-$320 per hinge for most ornamental iron and aluminum gates, including welding the new barrel or strap hinge and aligning the leaf. We see far more hinge failures in Vienna than in warmer markets, because the freeze-thaw cycle works water into the hinge barrel, freezes it, and cracks the weld or the pin. A gate sags in the hinge post, not in the middle, and that is where we start. On 22180 lots with tight setbacks, we often weld the new hinge in place while the gate hangs on a temporary block, so nothing has to be pulled out onto the street.
Post Replacement
Post replacement in Vienna is the job where local knowledge matters most, and it typically runs $400-$1,400 depending on footing depth, post diameter, and whether the gate is automated. Here is the thing about Vienna specifically: the teardown wave replaced hundreds of modest ranchers with big custom homes, but many of those new homes got gates and gate posts installed on the original post footings sized for a lightweight 1960s fence. An 18-inch footing that held a chain-link post for fifty years cannot hold a 400-pound ornamental iron gate once frost heaves it the first winter. We see it in 22181 constantly. We cut off the old post at grade, break out the old footing, drill a new hole below the Fairfax County frost line, and pour a proper footing before welding the new post to a base plate or setting it in concrete. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Broken or bent rails get welded on site for $180-$480 in Vienna, depending on the length of the crack and whether we need to sleeve or replace a section of the top rail. Ice load is the main culprit here. Vienna’s ice storms glaze gates with a few hundred pounds of frozen water, and on shared driveways the plow pushes snow and ice right up against the gate leaf. We have pulled bent rails straight, welded hairline cracks in ornamental iron curves, and replaced entire bottom rails that snapped under ice weight. The work is done hot, ground smooth, and primed and painted before we leave, so it looks like the rail was always that way.
Custom Welding
Custom welding in Vienna runs $150-$450 for most repair-fabrication jobs. Need a new latch plate welded to an iron post because the old one cracked? We make it on the truck. Need a gate widened or a hinge tab moved because a new stone entry column went in? We measure, cut, weld, and finish it in the driveway. We also weld slide gate racks, repair broken pickets, and fabricate custom brackets for operators that were never designed for your post style. Whenever you need a part that is no longer made, we fabricate it rather than telling you to buy a new gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Vienna
We are certified to service nine major gate brands, and on most Vienna jobs that means LiftMaster, DoorKing, and Viking operators on ornamental iron gates, with Ghost Controls showing up on newer smart-home setups. We stock common boards, limit switches, receivers, and safety photocells for these brands, so a service call usually does not end with “the part is on order.” If your operator is a Viking or DoorKing and the gate is welded to real posts, that is exactly the kind of job we handle regularly across Vienna, from the neighborhoods off Beulah Road to the newer estates in 22182.
Common Gate Parts & Welding Problems We See in Vienna Homes
- Frost-heaved hinge posts on teardown-replacement homes. The new house went up, the old post footing stayed, and the first hard winter in 22180 moved the post out of plumb. No hinge replacement alone fixes that; the footing has to be re-poured below frost line.
- Ice-storm damage to welded rails and hinge pins. Vienna gets ice, not just cold. A few hundred pounds of ice on an ornamental iron gate leaf bends top rails and cracks hinge welds. We repair the rail and re-weld the hinge while the gate stays hung.
- Slide gate rack and pinion issues on shared driveways. Restricted working space off Vienna’s shared drives means slide gates sit right where salt, sand, and plowed snow collect. The rack gets fouled, teeth skip, and the operator errors out. We clean the rack, tighten the mounting bolts, and re-weld broken rack sections where needed.
- Undersized post footings causing gate sag. A gate that sagged suddenly did not actually sag suddenly. The post moved, slow and steady, over several winters. We pull the post, re-pour the footing, and set the gate back to plumb and level.
Pricing for Gate Parts & Welding in Vienna, VA
What should you expect to pay in Vienna? Hinge replacement runs $140-$320 per hinge. Post replacement runs $400-$1,400 with footing work included. Rail repair runs $180-$480. Custom welding work is $150-$450 for most single-visit repair jobs. These are the numbers we see across 22181, 22182, 22183, and 22185, with older mid-century houses usually at the lower end because the hardware is simpler and the newer automated gates at the higher end because the operators and safety edges add labor.
The price we quote is the price you pay. We discuss it before any work starts, we agree on it in writing, and there is no trip charge inside the county. Vienna homeowners over 65 or retired military get 10% off permanently, and any repair over $200 gets $40 off. If another company quoted you a written estimate, bring it to us for a free second opinion. Call (877) 610-2993 for a free estimate on your gate repair in Vienna today.
We Also Serve Cities Near Vienna
We work throughout Vienna and the surrounding area, including Mantua, Merrifield, Oakton, and Fairfax. If you need Gate Parts & Welding done right and you live anywhere near Vienna, call us. For a closer look at the areas we cover, visit our Vienna page for neighborhood-level service details.
Serving Vienna, VA - Our Local Coverage Area
We’re based in the Vienna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Vienna
Because plowed ice and snow get pushed against the gate leaf and shoved onto the track, and the weight lifts the rollers off the rail. The fix we do in Vienna involves clearing the track properly, checking the roller brackets for ice damage, re-setting the gate on the rail, and often welding a heavier stop or a track scraper to keep the buildup from recurring. Call (877) 610-2993 and we will come out, diagnose the specific failure on your gate, and fix it on the spot.
Most hinge repairs and weld repairs on an existing gate do not require a permit. But if the post has to be pulled and a new footing poured, Fairfax County has rules about post depth and placement, and your HOA may have additional covenants on top of county code. We flag any original installation that was not permitted, and we handle the repair so it complies with both county and HOA requirements before we finish. Call us at (877) 610-2993 and we will walk you through what your specific gate needs.
Yes, and this is one of the most common repairs we make in Vienna after a hard winter. The hinge post gets bent or frost-jacked out of plumb, the leaf drops, and the gate won’t close. We straighten or re-weld the post as needed, repair the hinge, and reset the gate to swing true. If the footing failed, we re-pour it below frost line before doing anything else. Call (877) 610-2993 to get a free estimate and same-week service in Vienna.
That pattern almost always means water is getting into the low-voltage wiring or the photocell housings, and it shorts out when the thaw releases trapped moisture. In Vienna, freeze-thaw cycles make this chronic. We trace the wiring, find the water intrusion point, seal or replace the affected parts, and often re-route the conduit so it drains. Call (877) 610-2993 and we will trace it out for you, no guesswork and no unnecessary part swaps.
Yes, most ornamental iron gates in Vienna can be fitted with a solar opener, provided the gate swings freely and the post is solid. The panels work well on Vienna lots even with partial tree cover in neighborhoods like Vienna Woods, and we often pair them with a small battery box for the weeks when the days get short and gray. We install the operator, the panel, the safety edges, and the keypad, and we quote the whole job upfront in writing. Call (877) 610-2993 for a free on-site measure and a firm price.
Contact Gatewood Fence & Gate in Vienna
If your gate needs a hinge, a post, a weld, or a new part, call Gatewood Fence & Gate at (877) 610-2993. A live person answers, day or night. We weld on site, we quote before we work, and the 90-Day Done Right Promise is stamped on every invoice. Hal Gatewood has been at this since 2001, and the name on the shop is the name on every job. Call us now and we will be there in the window we promised.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Vienna since 2001.