Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Uhrichsville
If your gate is dragging, sagging, or the latch won’t catch in Uhrichsville, the problem usually starts below the hinge, not at it. Our Gate Parts & Welding crew repairs, welds, and rebuilds gates throughout the 44683 zip code, including New Philadelphia Road, Water Street, and the neighborhoods off McCauley Drive. We answer the phone at (877) 610-2993 around the clock, and the person who answers is someone who actually knows gates, not a script. Hal Gatewood has been at this since 2001, and when you call about a gate that won’t close, he takes it personally. We’ll send a truck to Uhrichsville, quote the job before anything gets touched, and stand behind the work with our 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Uhrichsville’s Preferred Gate Parts & Welding Company
Uhrichsville is not a market to us. It’s where we’ve driven past the old clay plant sites, watched the Tuscarawas River rise in spring, and learned how the ground under this town behaves. That matters because a gate post in Uhrichsville sits in expansive clay that swells with moisture and freezes hard every winter. A company that installs posts the same way it would in Canton or Dover will be back in six months wondering why the gate binds again. We set posts below the 32-inch frost line, and we weld on site so your gate stays in your driveway instead of going to some shop across the county.
Our customers in Uhrichsville call us back because the person who shows up is background-checked, uniformed, and works for the name on the invoice. There’s no dispatch through three states. No call center. Hal’s name is on the shop and on every job we do. When a retired couple off Grant Street calls about a gate latch that won’t engage, we treat it like our own gate. That’s the oldest accountability there is, and it still works.
We also make it easy to say yes: $40 off any repair over $200, no trip charge inside Tuscarawas County, free second opinions on any written estimate, and a permanent 10% discount for seniors and veterans. You’ll know the price before we start, and it won’t change at your door.
Our Gate Parts & Welding Services in Uhrichsville
We handle the parts and welding work that keeps an existing gate alive. New gates are sometimes the right answer, but in Uhrichsville, where money stays close to home and the older gates have good bones, repair-first usually wins. Here’s what we do most often.
Hinge Replacement
Hinges on old chain-link and farm gates in Uhrichsville take a beating from freeze-thaw cycles. Steel rusts, hinge straps tear, and the gate starts to sag away from the latch. We replace hinges with welded or bolted steel straps sized for the gate’s weight, and we always check the post behind the hinge before we call it fixed. A new hinge on a heaved post is a two-season repair, and that’s not how we work.
Post Replacement
The clay soil here moves. We see posts near Claymont High School and older streets off Water Street that have tilted two inches or more after a bad winter. We cut out the old post, set a new one in a concrete collar below the 32-inch frost line, and re-hang the gate so it swings true. This is the service that fixes the problem at its root, not at its symptom.
Rail Repair
Rails rust through where they meet the post or where a dog or four-wheeler has bent them. We cut out the bad section and weld in new steel, then prime and paint it to match the existing frame. On older chain-link gates from the 1960s and 70s, the top rail often fails where the tension is highest. We repair it in place most of the time.
Custom Welding
Sometimes the part that broke doesn’t exist anymore. Not in a catalog, not on a shelf. We weld custom brackets, hinge plates, extension ears, latch mounts, and frame sections on site. If a livestock gate on a small farm outside Uhrichsville needs a heavier hinge than the original, we’ll build it. That’s what on-site welding is for.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Uhrichsville
We’re certified to work on nine major gate brands, and in Uhrichsville we see a lot of older Linear and FAAC operators on post-mounted swing gates, plus BFT units on newer installs. We keep common boards, gears, and safety parts in stock so a good operator doesn’t wait on a shipping truck. If your LiftMaster, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule opener needs a board, a limit switch, a capacitor, or a full motor replacement, we can usually handle it the same trip.
Common Gate Parts & Welding Problems We See in Uhrichsville Homes
- Spring-thaw post heave: The clay under a gate post swells and freezes all winter, then thaws unevenly in March. Posts tilt toward the street, gates sag at the latch side, and the gate drags on the ground every time the clay expands.
- Corroded steel on mid-century gates: Uhrichsville’s housing stock went up fast during the pottery and clay boom. Those original chain-link gates are now 50 to 70 years old, and the steel hinges, latches, and rail ends show it.
- Legacy operators without safety sensors: Old swing-gate operators around town often lack photocells or edge sensors. When the gate sits on a heaved post, the operator pushes against a misaligned gate and burns out the motor.
- Seized roller latches: Freeze-thaw stress plus old grease means roller-style latches on chain-link gates stop rolling. The gate won’t close, and the homeowner is out there with a bungee cord.
Pricing for Gate Parts & Welding in Uhrichsville, OH
Here’s what we typically quote in Uhrichsville and the surrounding Tuscarawas County area. A hinge replacement on a standard residential chain-link gate runs $140 to $320 depending on whether we’re welding a new hinge strap or just replacing the pin and bracket. Post replacement with a concrete collar below the frost line runs $280 to $650 per post, including removing the old footing when access permits. Rail repair or a short welded splice runs $95 to $240. Custom welding for a heavy farm gate hinge or a gate extension runs $120 to $400 based on steel weight and complexity. Every price is quoted and agreed before we start, and estimates are free.
We Also Serve Cities Near Uhrichsville
When you need Gate Parts & Welding in Uhrichsville, we’re already local. We also run trucks to New Philadelphia, Dover, North Canton, and Canton for the same repair-first pricing and the same 90-Day Done Right Promise. If you’re on the Uhrichsville side of the county, call (877) 610-2993 and we’ll be there.
Serving Uhrichsville, OH - Our Local Coverage Area
We’re based in the Uhrichsville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Uhrichsville
The clay soil under Uhrichsville swells when wet and freezes when cold. A post set above the 32-inch frost line will heave and tilt every season, which pulls the gate out of alignment and makes it bind or drag. A repair that doesn’t reset the post below that depth will fail again within one freeze cycle. We set new posts in a concrete collar below the frost line specifically for this. Call (877) 610-2993 and we’ll look at your post depth first.
Usually yes, if the post is still sound and the steel around the tear hasn’t rusted through. We cut back the old strap, weld a new steel hinge plate, and re-hang the gate. If the post has heaved or the steel is too thin to weld cleanly, we’ll tell you honestly and quote a post replacement instead. We’ll never weld a repair onto a post that’s about to fail.
Most of the time in Uhrichsville, the post shifted and the operator is fighting the misalignment. When an operator pushes against a binding gate, it draws too much current and faults out, which cooks the limit switches or the motor over time. We fix the post first, re-align the gate, then test the operator. If the motor was damaged, we replace only what’s needed. Call (877) 610-2993 for a free evaluation in Uhrichsville.
If the gate is dragging, the latch is the symptom, not the problem. The post has heaved or the hinges have worn, and the gate is sitting low on the ground. We’ll adjust or replace the hinges and reset the post if needed before we touch the latch. A new latch on a sagged gate just means you’ll call us again in April. Our repair-first approach fixes the cause so the latch holds.
In most Uhrichsville cases, retrofitting the existing operator with a new control board, safety sensors, and properly aligned arms costs less than a full replacement. You keep the steel gate, get modern safety edges installed, and save hundreds. If the gate itself is twisted beyond a good re-hang or the post is rotted below grade, replacement can be the cheaper long-term answer. We’ll give you both numbers in writing before you decide. Call (877) 610-2993.
How Uhrichsville’s Clay Soil Changes the Repair Game
Uhrichsville earned the nickname “Clay City” for a reason. The same expansive clay that fed the historic tile and brick plants along the river is still under every fence post in town. What that means practically: a gate that worked fine in October can bind by March because the clay under the post absorbed winter moisture, froze, and lifted the post a fraction of an inch. Repeat that for a few winters and the post leans, the gate sags at the latch, and the hinges tear. We see this on streets off N. Water Street and throughout the older neighborhoods built during the pottery boom. The real fix almost always starts at the base of the post, not at the hinge. On a modest street off N. Water Street, our crew found a 1970s chain-link swing gate whose hinge post had heaved nearly two inches after last winter. The latch no longer caught and the hinge strap was torn. We cut and welded a new hinge post set in a concrete collar below the 32-inch frost line, replaced the roller-style latch, and re-hung the gate so it swings true without binding.
That’s the job, in one story. Anyone can swap a hinge. Fixing it so it stays fixed through three or four Uhrichsville winters takes someone who knows the ground.
Repair What You Have, Replace Only What’s Done
Hal’s philosophy is simple: a gate sags in the hinge post, not in the middle, and that’s where we start. We don’t haul gates off to a shop. We don’t sell you a new gate because your hinge pin wore out. We weld on site, in your driveway, and we show you the broken part before we replace it. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
If you’re in Uhrichsville and your gate needs a hinge, a post, a welded rail, a new latch, or a full operator retrofit, call (877) 610-2993. A live person answers, day or night. Estimates are free, the price is set before we start, and the 90-Day Done Right Promise is stamped on every job. If it’s not done right, one call brings us back. No runaround, no fine print.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Uhrichsville and Tuscarawas County.