Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tuttle
Gate parts and welding in Tuttle usually means one of two things: a hinge post that has heaved out of plumb and is binding the latch, or a wind-racked frame that needs a welder who will come to the property instead of hauling the gate off. Most Tuttle jobs run $180 to $520 depending on whether we’re replacing a post footing, re-welding a rail, or swapping out worn hinge barrels. Hal Gatewood and our crew handle both the parts side and the on-site welding side, and we’ve worked on enough acreage gates around Grady County to know what the clay soil and the southwest wind do to a perfectly hung gate over two or three seasons. Call (877) 610-2993 and a live person answers, day or night.
We don’t route calls to a voicemail tree. We don’t subcontract the welding to somebody you’ll never meet. The person who answers the phone is the person who will stand in your driveway and tell you what’s actually wrong with the gate, quote you a price before any work begins, and write the 90-Day Done Right Promise on the invoice.
Why Gatewood Fence & Gate Is Tuttle’s Preferred Gate Parts & Welding Company
Gatewood Fence & Gate has been locally owned and owner-operated since 2001. Hal Gatewood’s name is on the shop, his license number and address are published where anyone can check them, and that matters to people in Tuttle who have already been burned by an outfit that quoted one number over the phone and billed another at the door. Our customers around the 73089 ZIP code know we quote the price up front and the price doesn’t change once the work starts.
We answer calls live, 24 hours a day. That’s not a slogan. It means when an ice storm snaps a hinge pin on your pasture gate at 6 a.m., you get a real person, not a recording. We coordinate scheduling from our Oklahoma City office, and our crews serve Tuttle locally, including the acreage properties off County Road 1190, the residential streets near Tiger Safari the kids drag you to on weekends, and the newer lots along the SH-37 corridor. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.
We’re also certified to service nine major gate brands, including Viking, Ghost Controls, and DoorKing. That means when the problem is a control board or a safety sensor and not the steel itself, we don’t tell you to call somebody else. We fix the whole system.
Our Gate Parts & Welding Services in Tuttle
This page is about the parts and the steel, but around Tuttle the steel is usually the problem. Here’s what we handle most often, all done on-site so your gate stays where it belongs. We work with the full Gate Parts & Welding scope, but these four services cover the bulk of what we see on Tuttle acreage and residential driveways.
Hinge Replacement
On wide pipe livestock gates, the top hinge barrel takes the beating. Southwest Oklahoma wind loads a tall gate like a sail, and the top hinge wears oblong long before the bottom one shows any play. We replace weld-on hinge barrels, re-weld the existing plate if the steel is sound, and set the gate leaf so it swings clean without dragging. In Tuttle, hinge replacement on a standard residential gate typically runs $140 to $290. On a heavy pipe gate, plan $220 to $410 with the added labor of supporting the leaf while the old barrel is cut free.
Post Replacement
The hinge post is where almost every sagging gate in Tuttle actually starts. Expansive clay under a shallow footing heaves and tilts the post an inch or two over a dry summer, and the latch stops lining up no matter how many times you adjust the hardware. We dig out the old footing, set the new post deeper with rebar dowels, and re-hang the gate so it operates like it did the day it was built. Post replacement in Tuttle runs $320 to $680 depending on post diameter, depth, and whether concrete removal is involved.
Rail Repair
Ice storms are a real thing in central Oklahoma, and they snap hinge pins and bend rail ends in ways welded joints were never designed to handle. We cut out the bent or cracked section, sleeve and weld in a new piece when the surrounding steel is good, and re-straighten what can be saved. Rail repair on a Tuttle pipe gate usually runs $160 to $380. We’ll tell you before we start whether the rail can be saved or the whole frame’s a write-off.
Custom Welding
Sometimes the gate you need doesn’t exist in a catalog. We do custom welding and fabrication on-site: gusset plates for wind-racked corners, mid-rail braces to stop sag on wide spans, new latch receivers when the original’s been wallowed out, and bracket work for adding Ghost Controls or Viking openers to older gates. Custom welding in Tuttle starts around $120 per hour plus materials, with simple bracket jobs coming in under $200 and more involved fabrication running $350 to $900.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tuttle
When the part that failed is electronic rather than structural, it helps that we’re certified for the brands Tuttle homeowners actually have bolted to their gates. We service Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. If we’re replacing a control board or a limit switch, we bring the right part the first time because we stock common components for these brands locally. That means a Ghost Controls open limit failure on a SH-37 driveway gate doesn’t turn into three trips and a week of waiting.
Common Gate Parts & Welding Problems We See in Tuttle Homes
- Hinge post footings heave and tilt from shrink-swell clay. Tuttle’s heavy clay soil grows and shrinks dramatically between wet winters and baking summers, tipping posts just enough to bind the gate and misalign the latch. This is the single most common cause of ‘the gate won’t latch’ calls we get in the 73089 ZIP code, and it’s not something new hinges will fix.
- Wind racking on wide pipe farm gates. The flat, open terrain around Tuttle gives the southwest wind a long, unobstructed run at your gate. Frames twist and top hinge barrels wear oblong, and the gate starts dragging on the latch side. Weld-on gussets and a mid-rail brace solve it.
- Ice storm hinge and rail damage. Central Oklahoma gets ice, and ice loads a gate laterally in a way it was never designed for. Hinge pins shear, rail ends bend, and welded joints crack. We see a spike in these calls every January and February.
- Latch receivers wallowed out on high-use ranch gates. On working livestock gates that get swung dozens of times a day, the receiver hole wears egg-shaped and the latch no longer holds. It’s a simple weld-on fix, but it has to be done on the gate, not on a bench back at a shop.
Pricing for Gate Parts & Welding in Tuttle, OK
Here are the number ranges we quote for Tuttle work, so you have a real starting point before you call.
- Hinge replacement: $140-$410 depending on gate weight and hinge type.
- Post replacement: $320-$680 including digging, concrete, and re-hanging the gate.
- Rail repair: $160-$380 for a typical cut-and-weld section repair.
- Custom welding: $120/hour plus materials, with most jobs landing between $200 and $900.
- Latch and receiver work: $85-$220 for weld-on replacement receivers and striker alignment.
Every price is quoted and agreed before we touch the gate. Every job carries the 90-Day Done Right Promise in writing. There’s no trip charge inside the county, and we knock $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. If you want a second set of eyes on a written estimate from another company, bring it to us, and we’ll give you a free second opinion. Call (877) 610-2993 and you’ll get a number you can actually plan around.
We Also Serve Cities Near Tuttle
If you’re outside Tuttle but close, we cover the surrounding area too. That includes Newcastle, Mustang, Blanchard, and Yukon, along with most of the unincorporated acreage in Grady County. You can see the full picture on our Gate Parts & Welding in Tuttle page.
Serving Tuttle, OK - Our Local Coverage Area
We’re based in the Tuttle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tuttle
It’s the clay. Tuttle’s expansive clay soil swells in the wet season and shrinks hard in the summer, and your hinge post heaves slightly with it. An inch or two of movement at the post translates to a latch that’s out of alignment at the catch. New hinges won’t fix it because the problem is under the ground, not at the barrel. The post has to be reset or shimmed, and only then can the latch be aligned to stay. We can look at it and tell you in five minutes whether it’s a post problem or a hardware problem. Call (877) 610-2993 for an exact quote, and there’s no charge for the trip inside the county.
In most cases, yes. We weld on-site with portable equipment, so we can cut out the damaged section, sleeve and weld the replacement, and brace the gate in place while the weld cools. Keeping the gate hung means no tractor work, no pulling pins, and no fighting to re-hang a heavy leaf on a post that’s already moved. Some repairs near the hinge side need the gate supported and the hinge side unloaded, but that’s a support job, not a removal job.
A larger-diameter post set in a deeper footing with rebar dowels beats a shallow pour every time. Around Tuttle, the winning move against shrink-swell clay is depth. You want the post below the zone that dries out and heaves, and you want mechanical connection from the concrete into the compacted soil below. We regularly replace shallow 18-inch footings with 36- to 48-inch footings on heavy pipe gates, and the difference after a dry summer is night and day.
Stand at the end of the gate and sight down the top rail. If the latch-side corner sits noticeably lower than the hinge-side corner while the post is plumb, the frame has racked. Weld-on gusset plates at the corners and a mid-rail brace will pull the frame square and keep it there. We do this repair on-site all the time in Tuttle, where the open terrain gives the southwest wind a straight shot at wider gates. The repair usually runs $300 to $700 depending on the gate span.
That depends entirely on the post. If the post is still plumb and the footing is solid, new hinges go on without touching the concrete. If the post has tilted, cracked, or heaved, new hinges on an old post just means you’ll pay for the same repair again in a year. We’ll tell you straight which one you’ve got before we quote the job, and the quote is the price you’ll pay. Call (877) 610-2993 and we’ll put eyes on it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tuttle, OK since 2001.
If your gate’s out of plumb, the hinges are worn, or a rail has cracked in the cold, call (877) 610-2993. We’ll answer, we’ll show up, and we’ll quote you a price that doesn’t change. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every job we write.