Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tracyton
If your gate is sagging, seized, or dragging on the driveway in Tracyton, the problem is almost always at the post, the hinge, or the weld, and it is almost always fixable in place. We have been doing on-site gate welding and parts replacement on Dyes Inlet for years, and we know what that salt air does to steel. A typical hinge replacement in Tracyton runs $180-$340, a post replacement $450-$900 depending on depth and footing, and custom welding starts around $120. Call us at (877) 610-2993 and we’ll give you a straight price before any work starts.
Tracyton is not like inland Kitsap. The houses sit right on the water or climb the hillsides above Dyes Inlet, and the marine air gets into everything. Hinges seize. Posts rot at the footing. Operators short out from corrosion on the boards. We fix gates here the way they should be fixed: on site, with parts rated for the coast, and a written 90-Day Done Right Promise behind every job.
Why Gatewood Fence & Gate Is Tracyton’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 with a simple rule: fix the gate in the driveway, not in a warehouse. That matters in Tracyton, because most gate failures here are welded or bolted into posts set in sloped ground near the inlet. Hauling a gate off site to a fabrication shop costs you a week and a torn-up driveway. We bring the welder, the stainless hardware, and the know-how to your property and leave it working.
Our local reputation in Tracyton is built on showing up when we say we will and not quoting one price on the phone and another at the door. The price we quote is the price you pay, agreed before the first cut or weld. Our crew is background-checked and uniformed, and Hal’s name is on the shop and on every invoice. That is not a corporate slogan. It is the oldest accountability structure there is.
We answer the phone with a live person, 24 hours a day, 7 days a week. Not a voicemail tree, not a chatbot. When your gate will not open and your car is trapped in the driveway at 6:45 in the morning, you want a person who knows Tracyton and can send someone who will actually show up. That is what we do.
We also carry the parts Tracyton gates actually need. Standard zinc-plated hinges and latches from the hardware store do not survive on Dyes Inlet. We stock marine-grade stainless and hot-dip galvanized components because we know what the salt air does, and we do not want to come back in three years for the same failure.
Our Gate Parts & Welding Services in Tracyton
Most Tracyton gates do not need full replacement. They need the right part, installed correctly, at the right point in the structure. We repair what other companies want to swap out. Here are the services we do most often on the inlet.
Hinge Replacement
On waterfront and hillside lots in the 98393 zip code, hinge replacement is probably the single most common call we get. Tracyton’s salt-laden marine air seizes standard zinc-plated hinges solid in as little as three to five years. We cut out the old hardware, weld or bolt in 316 stainless hinges sized for the gate weight, and realign the gate so it swings without scraping or binding. Most hinge replacements in Tracyton run $180-$340 per gate, including hardware and labor.
Post Replacement
Gate posts on Tracyton’s sloped lots fail at the base first. Rainwater and salt spray wick down into the post footing, the steel rusts through at the concrete line, and the gate drops, dragging the driveway or the lawn. We cut out the corroded section, set a hot-dip galvanized post into a new concrete footing, and reweld or rebolt the gate in place. A post replacement in Tracyton typically runs $450-$900, depending on the post size, footing depth, and whether we are fighting a hillside slope. Fix the panel without the post and you will fix it twice. A gate sags in the hinge post, not in the middle, and that is where we start.
Rail Repair
Rails on swing gates and slide gates take a beating in Tracyton. Salt corrosion thins the steel over time, and the constant wet season from October through April accelerates it. We repair cracked or rusted rails on site, weld reinforcement plates where the metal is still sound, and replace rail sections when they have gone too far. If the rail has failed, we always check the rollers and the post too, because on a waterfront lot, one failed rail usually means something upstream caused it.
Custom Welding
Not every Tracyton gate is a standard size. Mid-century waterfront cottages and hillside homes built during the post-WWII Naval Shipyard era often have odd gate openings, custom panel widths, and steel work that no off-the-shelf part fits. We do custom welding on site: repairing broken gate frames, fabricating gate extensions, reinforcing weak welds, and modifying existing gates to fit. Custom welding starts around $120 for small repairs and goes up based on the amount of steel and shop time. We quote it before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tracyton
We service and repair gate hardware from the brands most common on Tracyton properties, including Linear, Viking, Ghost Controls, and DoorKing. We have worked on all of them enough to know their failure points, especially in a marine environment. The parts we order and stock for Tracyton customers are chosen for corrosion resistance first, because a cheap replacement part on Dyes Inlet is just a future service call. If you have an operator or gate hardware from any of these brands, we can diagnose it, source the correct replacement parts, and install them on site.
Common Gate Parts & Welding Problems We See in Tracyton Homes
- Hinges and latch bolts seized solid from rust. Standard zinc-plated hardware fails within 3-5 years in the salt air off Dyes Inlet. We replace it with 316 stainless so it does not seize again.
- Gate posts rotted or cracked at the base. The post footing wicks moisture and salt down to the steel, and the post fails at the concrete line. The gate drops, the latch misaligns, and the whole thing drags. We cut and replace the post in place.
- Wood gates swollen and warped from the wet season. From October through April, wood gates on the inlet soak up 50-55 inches of rain and swell enough that they will not close. We plane, realign, and often convert the hardware to stainless at the same time.
- Operator boards corroded by moist salt air. Slide gate operators on sloped waterfront lots fail intermittently when the circuit boards and limit switch terminals corrode. We clean, repair, or replace the boards and seal the housing properly.
Pricing for Gate Parts & Welding in Tracyton, WA
Here are the ranges you can expect in the Tracyton market, as of this year:
- Hinge replacement: $180-$340 per gate, including stainless hardware.
- Post replacement: $450-$900 per post, including footing and concrete.
- Rail repair: $150-$400, depending on length and reinforcement needed.
- Custom welding: Starts at $120, and most small repairs land between $120 and $350.
- Latch and lock replacement: $90-$250, including stainless latches and locks.
What affects the price is what we find when we dig into it: post depth on a sloped hillside, the weight of the gate, and how much corrosion has eaten into the surrounding steel. We quote the job before we start, in writing, and that is the number you pay. We do not surprise people at the door. There is no trip charge inside the county, we offer $40 off any repair over $200, and there is a permanent 10% discount for seniors and veterans. A free second opinion on any written estimate is always available.
We Also Serve Cities Near Tracyton
Our Gate Parts & Welding work takes us all over Kitsap County from Tracyton to the surrounding neighborhoods. We serve Manchester, Bremerton, Silverdale, and Bainbridge Island with the same on-site welding and marine-grade parts we use on Dyes Inlet. If your gate is failing anywhere in the area, call us and we will be there.
Serving Tracyton, WA - Our Local Coverage Area
We’re based in the Tracyton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tracyton
Because Dyes Inlet is a marine arm of Puget Sound, and the air carries salt-laden moisture straight into your hardware. Combine that with 50-55 inches of annual rainfall, and standard zinc-plated hinges corrode and seize within 3-5 years. Three miles inland in Silverdale, the same hinge lasts a decade or more. It is the salt, not the rain alone. On inlet properties we quote 316 stainless hinges from the start. Call (877) 610-2993 for an exact price for your gate.
On a waterfront or near-waterfront lot in Tracyton, repainting standard steel usually means painting over rust that is already working from the inside. Hot-dip galvanized steel lasts dramatically longer in salt air. If the structure is still sound, we can sand, repair, and weld where needed, then you can decide on the finish. If it has been repaired three times, we will tell you straight that galvanized replacement panels are the better call. Estimates are free.
Nearly every time, the post has moved or the hinge side has sagged. On Tracyton’s sloped lots, the footing settles and the wood post or steel post rotates just enough that the latch-side corner dips and scrapes. The wet winters speed this up by softening the soil around the footing. We dig the footing, re-set the post, and realign the gate. It is usually a post problem, not a gate panel problem. Call us and we will confirm it before quoting anything.
Yes, if you want the latch to work in three years. The salt air off Dyes Inlet seizes standard latch bolts and locks quickly, and a gate you cannot open is a gate that fails when you need it most. We install 316 stainless latches and locks as standard on inlet properties, not as an upgrade. It is the practical minimum spec for Tracyton’s environment, and it costs less than replacing seized hardware twice.
We work around the gate, not through your driveway. We cut the bad post out, dig the old footing with a post-hole digger or small auger, and set the new hot-dip galvanized post into fresh concrete. The gate gets welded or bolted back in place on site, right where it sits. We do not bring in heavy equipment unless the post is enormous. Most driveway post replacements never touch the driveway surface. Call (877) 610-2993 and we will give you a straight answer on your specific gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tracyton since 2001.
If your gate is failing anywhere in Tracyton, from the waterfront off Tracyton Beach Road up into the hillsides of the 98393 zip code, call us at (877) 610-2993. A live person answers. The estimate is free. And the price we quote is the price you pay.