Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across The Colony
Gate parts and welding in The Colony usually means one of three things: a hinge that has seized from years of lake humidity, a post that has heaved out of plumb, or a weld seam that has finally let go. The Colony is not like inland Denton County suburbs, and we treat it that way. The north shore of Lewisville Lake pushes moisture against ironwork in ways Frisco and Carrollton never see, and the black clay under your posts moves every season. If your gate is sagging, scraping, or reversing for no reason, call (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and he’ll tell you straight whether that hinge can be saved or the post needs to come out.
Why Gatewood Fence & Gate Is The Colony’s Preferred Gate Parts & Welding Company
Our crew works The Colony neighborhoods regularly, from The Tribute down to the older subdivisions off North Colony Boulevard. We know what passes HOA architectural review in this city and what does not. We know which lakefront gates blister first and which inland ones just need a hinge rebuild. That kind of local knowledge is not something you get from a company that shows up once and sends a different person every time.
Hal Gatewood is owner-operated and has been since 2001. His name is on the shop, the license number is published, and the address is no secret. When a The Colony homeowner calls, a live person answers. That is not a call center three states away. That is someone who knows what a UL 325 entrapment sensor is and why yours keeps tripping after heavy rain.
Every job, whether it is a simple latch replacement in the 75056 zip code or a full post reset near Lewisville Lake, carries the 90-Day Done Right Promise in writing. If it is not done right, one call brings Hal back. No runaround, no re-quoting, no fine print. $40 off any repair over $200, no trip charge inside Denton County, and a permanent 10% discount for seniors and veterans. That is the deal, stated up front.
Our Gate Parts & Welding Services in The Colony
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. In The Colony, lake-facing hinges on ornamental iron rust and seize faster than street-facing ones. We have pulled hinges off Tribute homes that looked fine from the street but had the barrel frozen solid on the lake side. We replace them with marine-grade hardware and weld the pin properly, so the gate swings clean instead of dragging on the latch side. Most hinge replacements in The Colony run $150 to $350 per hinge, depending on the weight of the gate and whether the post needs re-plumbing first.
Post Replacement
Clay soil heave in The Colony tilts gate posts out of plumb every season. You can fix the panel without the post and you will fix it twice. We dig below the active clay zone, set the post deeper, and re-weld the gate to match the new alignment. In waterfront neighborhoods where the soil never fully dries, we use treatments that slow the cycle. A typical post replacement in The Colony runs $500 to $1,200, including the concrete work and re-hanging the gate. If the post is on a shared HOA entry, we coordinate with your management company before we touch anything.
Rail Repair
When a horizontal rail cracks, it is rarely from one impact. Usually it is fatigue from years of a sagging gate pulling against a seized hinge. We cut out the cracked section, sleeve and weld it back, and then fix the hinge that caused the problem in the first place. Otherwise you are welding the same rail again in eighteen months. Rail repairs in The Colony typically run $175 to $400, and because we weld on site, the gate stays in your driveway the whole time.
Custom Welding
Sometimes the part does not exist anymore, especially on gates built in the 1990s by fabricators who are long gone. We custom-weld replacement brackets, gate leaves, scrollwork, and latch mounts in place. If your HOA requires a specific ornamental pattern to match the rest of the street, we can match it. Custom welding for The Colony homes starts around $200 and goes up from there based on how much fabrication the job needs. The price is quoted and agreed before any work starts, in writing.
Gate Rollers
Sliding gates in The Colony use rollers that wear flat, especially on heavier automated driveway gates. A worn roller makes the gate grind and eventually burns out the opener. We replace rollers and the track, adjust the carrier wheels, and re-set the chain or belt tension. Roller and track service in The Colony typically runs $200 to $450 per gate, parts included.
Latch & Lock
Pedestrian gates and pool gates in The Colony take a beating from kids, wind, and automatic closers. A latch that will not catch is a safety problem, especially on a pool gate. We replace or re-weld latch hardware, align the strike, and make sure the self-closing hardware meets code. Latch and lock repair in The Colony runs $125 to $275 in most cases.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in The Colony
We are certified to service nine major gate opener brands, and in The Colony we see a lot of Viking and Ghost Controls on lakefront homes, with DoorKing on community entry systems. We keep common parts in the trucks, so if you are in the 75056 zip code we are usually not running back to the shop for a hinge or a capacitor mid-job. If the part is not on the truck, we order it and tell you the schedule honestly. The Gate Parts & Welding side of our business means we can fabricate what no supplier stocks anymore.
Common Gate Parts & Welding Problems We See in The Colony Homes
- Lake-side rust and seizing. The humidity off Lewisville Lake attacks the east and north faces of iron gates in The Tribute and nearby waterfront communities. Factory paint blisters within a few years, and hinges seize on that side first.
- Post heave from black clay. The Colony’s expansive soil swells after spring rains and contracts in summer drought. Hinge posts tilt, gate leaves bind against the latch post, and the gate starts dragging or refusing to close.
- Photon eye and loop detector drift. When a post moves even a quarter inch, the safety beam no longer lines up. The gate reverses every few seconds for no visible reason. This is a daily occurrence in The Colony neighborhoods with clay-heavy yards.
- Weld fatigue from sagging gates. A gate that sags puts constant stress on the hinge welds and rail joints. After years of that, the weld cracks. Welding the crack without fixing the sag means you will see us again next year.
Pricing for Gate Parts & Welding in The Colony, TX
Here is what we typically charge in The Colony. Hinge replacement runs $150 to $350 per hinge. Post replacement runs $500 to $1,200 depending on depth and the condition of the concrete footing. Rail repair runs $175 to $400. Custom welding starts at $200 and goes up with fabrication time. Roller and track service runs $200 to $450. Latch and lock repair runs $125 to $275. Gate opener service, when included, adds parts cost with labor already covered by the repair trip.
What changes the price is access, weight of the gate, and whether the post has moved enough to require re-setting rather than shimming. We give you a written quote before work begins, and that is the number on the invoice. No trip charge inside Denton County means you can get an honest answer without paying for the visit. Call (877) 610-2993 for a free estimate.
HOA Requirements and Gate Work in The Colony
Most The Colony neighborhoods with automated gates are HOA-governed, and the management company usually has an architectural review process for anything visible from the street. A hinge replacement or a weld repair is maintenance and rarely needs approval. A full gate replacement, a new ornamental pattern, or a change in finish color often does. We have been through enough Colony HOAs to know what the committees ask for: a written description of the work, the paint or powder coat specification, and sometimes a photo of the existing gate before we touch it. We provide all of that so you are not the one chasing paperwork.
For shared entry gates, we coordinate directly with your management company. That means scheduling the gate to be disabled for a predictable window, arranging temporary access for residents, and confirming the safety sensors are re-aligned and tested before the gate goes back into service. Show me the gate closing on its own and I will show you where it is failing. We do not leave until the entrapment protection is working.
We Also Serve Cities Near The Colony
Our crews serve The Colony and the surrounding communities: Frisco, Little Elm, Carrollton, and Lewisville. If you are just outside the city line, call us anyway. The trip charge is still waived inside Denton County, and the same 90-Day Done Right Promise applies.
Serving The Colony, TX - Our Local Coverage Area
We’re based in the The Colony area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in The Colony
The north shore of Lewisville Lake creates a persistent humidity band that moves inland only a few hundred yards. The lake-facing side of your gate gets more moisture exposure, slower drying after morning dew, and salt-free but mineral-rich airborne water that accelerates oxidation. We see east and north elevations blister through factory paint in five to seven years while the street side looks nearly new. The fix is a marine-grade primer and finish on that elevation, not just a respray over existing rust.
For a hinge replacement, almost never. That is maintenance and HOAs in The Colony treat it like changing a faucet. For a custom gate panel that changes the visual design, yes, most communities require architectural review before installation. We prepare the description, dimensions, and finish specification your management company asks for, so the approval is not on your plate. Call (877) 610-2993 and we will walk you through what your specific HOA requires.
Very often, yes. When black clay heaves a hinge post or an anchor post, the photocell beam and the loop detector shift out of alignment. The control board sees an obstruction or loses its ground reference and reverses the gate as a safety default. We re-set the post, re-align the sensors, and re-test under UL 325 entrapment protection standards before we call the job done. In The Tribute and other lakefront sections, we check this on nearly every automatic gate we service.
We dig below the active clay zone, usually 36 to 42 inches, and set the post in a footing that gives the soil room to move without grabbing the post. We also re-compact the backfill in lifts rather than dumping it in loose. That is slower, but it is why the post stays put. In The Colony’s waterfront neighborhoods where the soil never fully dries, we add drainage at the footing base so water is not pooling around the post during rainy springs.
Ask whether the repair falls under routine maintenance or requires architectural review, and get that answer in writing. Ask who is responsible for the gate if it serves multiple lots. Ask about the finish specification so the repair matches the rest of the community. And ask whether anyone else has an outstanding complaint about the gate, because that changes the scope. We can help you draft the questions and we will talk to the management company directly if you want. Call (877) 610-2993 for an exact quote, estimates are free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving The Colony since 2001.