Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tewksbury
Gate parts and welding in Tewksbury come down to one thing: whether the person fixing your gate understands what 29 years of New England winters do to steel, concrete, and the ground they sit in. We do. Gatewood Fence & Gate has been repairing, welding, and rebuilding gates since 2001, and we’ve spent a lot of those years on driveways between Route 38, Andover Street, and the neighborhoods off Whipple Road. If your hinge post is leaning, your rollers are ground flat, or a weld finally cracked, call us at (877) 610-2993. A live person answers, and Hal Gatewood is the one who stands behind the work.
Why Gatewood Fence & Gate Is Tewksbury’s Preferred Gate Parts & Welding Company
We’re not a franchise that rolled into town with a wrapped van and a sales script. We’re a locally owned, owner-operated outfit that has been repairing what other companies want to replace since before the Route 38 warehouse boom really took off. Tewksbury sits at the I-93/I-495 interchange, which turned the Route 38 corridor into one of northeastern Massachusetts’ denser industrial clusters. That means we don’t just see residential swing gates on 1970s colonials. We see heavy-duty commercial slide gates running 200+ cycles a day at distribution centers. The wear patterns are completely different, and if you don’t know both, you’ll misdiagnose the problem. We know both.
Hal’s name is on the shop and on every invoice. His address is published. His license number is there for anyone to look up. When you call (877) 610-2993, you don’t get a voicemail or a call center three states away. You get a live person, 24 hours a day, 7 days a week. And every job we do in Tewksbury carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print.
Our reviews from Tewksbury homeowners follow a pattern: they’d already been quoted a full replacement by another company, and we fixed the existing gate for a fraction of that. That’s the repair-first way Hal has worked for 29 years. We’d rather weld a hinge than sell you a new gate you don’t need.
Our Gate Parts & Welding Services in Tewksbury
When we say Gate Parts & Welding, we mean the kind of work that happens in your driveway, with a welder running off our truck, while your gate stays put. These are the services we handle most in Tewksbury.
Hinge Replacement
Most Tewksbury swing gates were hung when Nixon was in office. The hinges on those gates are original, and decades of I-93 salt spray have eaten through the pins and bearings. We replace hinges with heavier-duty hardware than what was originally there, and we weld them in place rather than bolting, because bolts loosen under daily cycling. A gate that sags in the closed position is almost always a hinge problem, not a panel problem.
Post Replacement
Gate posts in Tewksbury heave. The soil in this part of Middlesex County has a lot of clay, and clay holds water. When that water freezes and thaws, the ground swells and contracts, and shallow-set posts move with it. We see post bases that have shifted two to four inches out of plumb after a single hard winter, especially in lower-lying parcels near the Shawsheen River corridor. When we replace a post, we dig out the old footing, pour a deeper base with rebar, and set the post plumb so the gate operator stops faulting.
Rail Repair
Bent or rusted rails on a slide gate will destroy rollers in weeks. If the rail is grooved, the gate rides rough, the wheels grind, and eventually the gate jumps the track. In Tewksbury’s industrial sections along Route 38, where gates cycle hundreds of times daily, rail wear is a normal maintenance item, not a once-in-a-decade repair. We straighten, weld, or replace rail sections depending on the damage, and we’ll tell you honestly which one your gate needs.
Custom Welding
Ornamental iron gates commonly develop cracked welds at the corners and where pickets meet the frame. We weld them in place, grind the repair clean, and the gate stays on its hinges the whole time. We also fabricate custom brackets, reinforcement plates, and hinge mounts for gates that were originally built without enough steel in the stress points. If you’ve got a gate that’s sagged for years and someone else said “replace it,” let us look at it first.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tewksbury
We’re certified to service nine major gate brands, and in Tewksbury we work on a lot of FAAC and BFT operators on residential gates, plus Linear and Viking units on the commercial side. We keep common parts in stock for these brands, including control boards, limit switches, rollers, and hinge sets, which means the fix usually happens the same visit rather than two weeks later when a part finally shows up. If your operator is an older model with a board that’s no longer manufactured, we’ll tell you straight up what your retrofit options are, and what they’ll cost.
Common Gate Parts & Welding Problems We See in Tewksbury Homes
- Worn gate rollers and bent tracks on slide gates. Route 38 warehouses and distribution centers run gates 200+ times a day. Hardened rollers flatten, plastic wheels crack, and the gate starts jumping off the track. We see it here at a rate you won’t find in residential-only towns like Billerica or Wilmington.
- Rusted hinge pins and cracked welds on residential swing gates. The housing stock in Tewksbury was mostly built between the late 1960s and early 1990s, which means original ornamental iron and chain-link driveway gates are now 35 to 55 years old. Combine that with salt spray migrating from I-93 and Route 38, and rust-related hinge and latch failure becomes a signature springtime call.
- Heaved posts in clay-heavy soil. Tewksbury gets 20 to 30 freeze-thaw cycles per winter. Posts set in shallow footings or clay-dense soil heave out of plumb every spring, and a gate that scrapes the ground in March was usually fine in November.
- Obsolete control boards in legacy operators. Pre-UL 325 operators lack the entrapment protection features modern safety standards require. Some can be retrofitted with external safety edges and photocells. Some can’t, and retrofitting an unsafe board is not a repair we’ll do or recommend.
Pricing for Gate Parts & Welding in Tewksbury, MA
A hinge replacement on a residential swing gate in Tewksbury typically runs $220 to $480, including the new heavy-duty hinges and the welding labor. Post replacement costs more because of the excavation and concrete work: expect $600 to $1,400 depending on how deep the new footing needs to go and whether we’re resetting the existing post or installing a new one. Rail repair on a slide gate runs $300 to $900 depending on whether the rail gets straightened or replaced. Custom welding starts around $150 for a small crack repair and goes up from there for full fabrication work. Commercial slide gate roller replacement on Route 38 properties typically falls between $400 and $950 per set. Every quote is written down and agreed to before any work starts. No trip charge inside the county, and seniors and veterans get a permanent 10% discount. If you have a written estimate from another company, we’ll give you a free second opinion on it.
We Also Serve Cities Near Tewksbury
Our Tewksbury crew regularly runs jobs in Billerica, Wilmington, Andover, and Pinehurst. If you’re in one of those towns and you’ve got a gate that’s sagging, grinding, or flat-out not opening, the same repair-first approach applies. We’re the Gate Parts & Welding in Tewksbury team, and we cover the whole area.
Serving Tewksbury, MA - Our Local Coverage Area
We’re based in the Tewksbury area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tewksbury
No. A gate sags in the hinge post, not in the middle. If the panel itself is cracked or the frame welds are failing, we’ll weld those. But a seasonal sag means the post has moved or the hinges have worn, and welding the panel won’t fix the root cause. We start with the post and hinge, then address panel welds second. Call (877) 610-2993 for an honest assessment of what’s actually moving.
Sometimes yes, sometimes no. Pre-UL 325 operators can often be brought up to current safety standards with external safety edges, photocells, and a new control board. But if the operator’s motor and board both predate the standard, the retrofit cost approaches the cost of a new unit, and it’s smarter to replace the whole thing. We’ll price both options and tell you straight up which one we’d do on our own gate.
Ground saturation. The water table is higher near the Shawsheen, and the soil stays wet through freeze-thaw cycles. Every hard freeze expands the soil, every thaw contracts it, and a shallow post base gets pushed incrementally out of plumb. It’s a predictable annual problem in that section of Tewksbury, which is why we pour deeper footings with rebar when we re-set posts there. The standard fix is a 42 to 48 inch footing instead of the 30 inch one the original builder used.
It’s usually both, but the order matters. When rollers wear down or the track bends, the gate’s weight shifts onto the rack and pinion, which then strips. We check the rollers and track first, because replacing the rack without fixing the underlying wheel issue means the new rack will strip in months. In Tewksbury’s industrial corridor, we see this failure cycle constantly because of the daily cycle count.
Yes. We unbolt or cut the old hinges, support the gate leaf with a jack while we remove the old post and footing, pour a new base, set a new post plumb, and weld on heavy-duty hinges. The gate leaf stays intact. We’re not hauling anything off to a shop unless the leaf itself is cracked and needs bench welding. And we’ll show you the finished welds before we call the job done.
If your gate is sagging, grinding, or refusing to close and you’re in Tewksbury, call us at (877) 610-2993. A live person will answer, we’ll get you on the schedule, and we’ll show up when we say we will. Free estimates, upfront pricing, and the 90-Day Done Right Promise on every job. Hal’s name is on the shop. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tewksbury since the day he opened his doors in 2001.